Products

---

• All-O-Matic Inc
  • AOM - 2 Bearing: Inner Thrust
  • AOM - 3 Bushing: Main Pivot
  • AOM - 40B12X1 Sprocket: Gearbox Drive, 12 Tooth, 1" Shaft bore for SW-350AC/DC
  • AOM - 40B18X1 Sprocket: Main Drive Shaft, Dog Clutch, SL150AC/DC
  • AOM - 40B22X1 Sprocket: Chain Drive, 22 Tooth, 1 Inch Bore.
  • AOM - 41B10x58 Limit Shaft Sprocket, SL-150AC, SL-45DC and SL-150DC
  • AOM - 41B12X78 Gearbox: Gearbox Limit Sprocket
  • AOM - 41B15X1 Small Drive Sprocket for TK-100
  • AOM - 41B22x78 Gearbox Drive Sprocket
  • AOM - 41B30X1 Large Drive Sprocket for TK-100
  • AOM - 41BB17 Idler Sprocket, Metal, SL-150AC and SL-150DC
  • AOM - 4L-460 V-Belt: 4L-460 belt for AOM SW300
  • AOM - 7 Nut: Nylon Threaded - 3/4"
  • AOM - AC PCB 2016 UL325 PCB: UL-2016, AC 120V
  • AOM - AC PCB 2018 UL325 PCB: UL-2018, AC 120V
  • AOM - AC PCB PRE UL325 PCB: Pre UL-2016, AC 120V
  • AOM - AC PCB Upgrade Kit PCB: Upgrade Kit, Pre-UL-2016, AC 120V, w/back plate
  • AOM - BLDC 1/2HP PCB 2016 UL PCB: 1/2 HP UL-2016, DC
  • AOM - BLDC 1/2HP PCB 2018 UL PCB: 1/2 HP UL-2018, DC
  • AOM - BLDC 1/2HP PCB Pre-2016 UL PCB: 1/2 HP Pre UL-2016, DC
  • AOM - BLDC 1HP PCB 2016 UL PCB: 1 HP UL-2016, DC
  • AOM - BLDC 1HP PCB 2018 UL PCB: 1 HP UL-2018, DC
  • AOM - BLDC 1HP PCB Pre-2016 UL PCB: 1 HP Pre UL-2016, DC
  • AOM - BLDC 36V PCB PCB: Control Board, Gold, for SL-175DC and SW-375DC
  • AOM - BLDC-PRO Control Box - DC PRO Control Board
  • AOM - BLDC-ULPCB45 PCB: SL-45DC
  • AOM - BTY-H150 Battery Wire Harness for SL150DC
  • AOM - BTY-H90 Battery Wire Harness for SL90DC FP
  • AOM - CBC-102 Control Box Cover
  • AOM - CBC-90 SL100DC Control Box Metal Cover
  • AOM - CBX-102 Control Box for SL100 AC
  • AOM - CBX-AY90 Control box assembly for the SL90 operator
  • AOM - COM-1000 Power Supply Box on/off power switch
  • AOM - COM-1004 Control Box Reset Push Button (All Operators)
  • AOM - COM-1006 Control Box Bridge Rectifier
  • AOM - COM-1007 Limit Switch
  • AOM - COM-1007P Foot Pedal Release Kill Switch
  • AOM - COM-1008 Limit Adjustment Nut
  • AOM - COM-1009 Chain Bracket
  • AOM - COM-1010-1 Chain Adjustor Bolt - 1 pc
  • AOM - COM-1011 Aluminum Hub for Swinger
  • AOM - COM-1012 Limit Switch Collar
  • AOM - COM-1016 Harness: Allomatic PCB, Line in
  • AOM - COM-1017 Idler Wheel, Plastic
  • AOM - COM-1018 Motor Capacitor
  • AOM - Crank Handle Crank handle for manual slide gate operation
  • AOM - DC-ULPCBT PCB: Circuit Board for Toro
  • AOM - DSA-AY150 Clutch Assembly for SL150
  • AOM - DST-150 Main Drive Shaft
  • AOM - DST-300 Main Drive Shaft SW300
  • AOM - DST-301 Drive Shaft SW300 AC
  • AOM - EMI-PCB PCB: Power Selection Board, 220VAC/115VAC
  • AOM - EPC-100 Cover: Exterior Plastic Cover for the SL100
  • AOM - EPC-100FP Cover: Exterior Plastic Cover for the SL100FP
  • AOM - EPC-150 Cover: Exterior Plastic Cover for the SL150 AC/DC
  • AOM - EPC-300D Exterior Plastic Cover with Access Door SW300
  • AOM - EPC-45 Cover: Exterior Plastic Cover for the SL45
  • AOM - EPC-90 Cover: Exterior Plastic Cover for the SL90
  • AOM - EPC-S300 Cover: Exterior Plastic Hub Cover, SW300/SW350
  • AOM - FPR-150 Foot Pedal Release for the SL150 AC/DC
  • AOM - FPR-AY100 Foot Pedal Release Assembly for SL-100FP AC / SL-100DC
  • AOM - Fuse-15A (FS-15) Fuse: 15 Amp
  • AOM - Fuse-1A (FS-01) Fuse: 1 Amp
  • AOM - GB 150 Gearbox for SL150AC/DC
  • AOM - GBX-100 Gearbox for SL-100AC/SW-375DC, 10:1 reduction
  • AOM - GBX-101 Gearbox for SL-90, SL100DC 20:1 Reduction
  • AOM - GBX-150 Gearbox for SL-150AC and SL-150DC
  • AOM - GBX-175 Gearbox and Clutch for SL175
  • AOM - GBX-200 Gearbox for OH200DC and OH200AC
  • AOM - GBX-300 Gear box for SW300
  • AOM - GBX-350 Gear Box: for SW350DC
  • AOM - GCI-102 Gearbox Crank Insert
  • AOM - GCR-102 Gearbox Crank Release, SL-100
  • AOM - Gearbox Crank Insert Gearbox Crank Insert for SL100AC
  • AOM - IK3-50 Rear Mount Idler Kit (Metal) for #50 Chain
  • AOM - IK3-Metal Rear Mount Driver Idler Kit
  • AOM - IK3-Plastic Rear Mount Driver Idler Kit
  • AOM - LCK-150 Lock Kit For SL-150 AC & DC
  • AOM - LOCK KIT Lock Kit for SL-100
  • AOM - LSA-AY151 Limit Shaft and Switch Box Assembly, SL-150AC
  • AOM - LSB-AY103 Limit Switch Box Assembly for SL100FP AC
  • AOM - LSH-102 Limit Switch Wire Harness
  • AOM - LSP-100 Limit Switch Plate for SL100.
  • AOM - LST-150 Limit Shaft for SL150 DC
  • AOM - LST-AY100 Limit Switch Table Assembly for SL-100AC
  • AOM - MTR-1050 Motor: 1/2 HP AC (SL100,SW300,SW350)
  • AOM - MTR-1051 Motor: 1/2 HP Dual Cap AC (SL150)
  • AOM - MTR-1100 Motor: 1 HP Dual Cap AC (SL150/SW350)
  • AOM - MTR-1250 Motor, BLDC, 250W for SL-90 DC, FP
  • AOM - MTR-1500 Motor: 1/2HP Brushless DC, (SL100,SL150,SW300,SW350,SW325)
  • AOM - MTR-1500B Motor: Bracket, 1/2 HP Brushless DC, (SL100,SL150,SW300,SW350,SW325)
  • AOM - MTR-1750 Motor: 1 HP Brushless DC, (SL150DC,SW350)
  • AOM - MTR-2300 Motor: SL175, 2HP DC Motor
  • AOM - MTR-45 Motor for SL-45 DC
  • AOM - OTC-AY200 Trolley Assembly for OH200DC
  • AOM - PAB-AY90 Power Supply Box Assembly for SL90DC
  • AOM - Piezzo Alarm for Allomatic Operators
  • AOM - Pinion Rack 3'3" Pinion Rack Sections
  • AOM - PINION-1 1 inch Pinion Gear, for Rack and Pinion drive
  • AOM - PLY-2 Pulley: DC Motor Pulley for SL100DC & SL90DC
  • AOM - PLY-25B Gear Box Pulley for OH-200
  • AOM - PLY-5 Pulley: 5", Gear Box, for SL100AC
  • AOM - PLY-8 8" Pulley for SW300AC
  • AOM - PSB-AY45 Power Supply Box Assy. Fits SL45DC
  • AOM - QRA-200 Arm; Quick Release Arm for OH-200
  • AOM - QRA-300RR Arm, Quick Release, Rectangular Arm, SW300/SW350
  • AOM - QRA-RD300 Arm, Quick Release, Round Pipe Arm, SW300/SW350
  • AOM - QRA300IND Quick Release Index Key with Screws.
  • AOM - RP-100 SL-100 Rodent Plate
  • AOM - SAB-300RR Arm: Swinger, Rectangular, gate arm bracket, attch bar
  • AOM - SCA-325 Swinger Crank Arm
  • AOM - SL103FM Chassis for SL100ACFP
  • AOM - SQR-325 SW-325DC Swinger Quick Release Slide
  • AOM - SRA-300UH Arm Assembly Uphill Complete, SW300/SW350
  • AOM - SRA-RR300 Arm Assembly Complete (Rec tube type), SW300/SW350
  • AOM - SRA-RR325 Swinger Arm Complete for SW325 Newer Version
  • AOM - SRA-RR375 SWINGER RECTANGULAR ARM COMPLETE FOR SW-375DC
  • AOM - SSA-300RR Arm: Swinger, Rectangular, secondary arm
  • AOM - SSA-RD300 Arm, Secondary, Pipe, SW300/SW350
  • AOM - SW-300FM Frame Only, SW-300DC
  • AOM - Swivel arm Swivel arm for Allomatic
  • AOM - Swivel Joint Rod End for Uphill Arm
  • AOM - T24-033 Toro Rev 1 Limit Switch Assy.
  • AOM - T24-LS Limit Switch Assembly for Toro Arm
  • AOM - T24-WC Toro Cover
  • AOM - TFR-45 Transformer: Power Supply Box for SL45 DC
  • AOM - TFR-480 Transformer: For SL150 1 HP
  • AOM - TFR-90 Transformer: For the Toro
  • AOM - TLA-AY300 Torque Limiter Kit, SW300AC and SW300DC
  • AOM - TLD-300 Clutch Friction Disc (1 Pair)
  • AOM - Warning Sign Warning Sign
• BFT - Somfy Systems, INC
  • BFT - D730252 GATE BRACKET (ONLY) FOR THE LUX.
  • BFT - I100105 Distribution head for the P4.5 Hydraulic actuator
  • BFT - I100115 Seal Kit for the P4.5 Hydraulic actuator arm
  • BFT - I101102 Kit - Deimos BT Motor and Accessories
  • BFT - I105800 Rear Body Assembly (Phobos New Style)
  • BFT - I106501 Mounting bracket kit, Lux BT
  • BFT - N999368 Rear cover kit for the phobos
  • BFT - P935069 00001 PHOBOS BT (Replacement Arm, early version)
  • BFT - P935070 00002 IGEA BT 24V (Replacement operator only)
  • BFT-D610256 CLS/82MM - RELEASE KEY (SUB)
  • BFT-I105826 Trolley Kit for Phobos Operator
  • BFT-KRELAY 24V AC/DC Maglock Relay
  • BFT-P935074 00003 PHOBOS BT N L (Replacement Arm, current version)
• Byan Systems
  • BYA - 5606G Aeroshell Fluid 4 (Aircraft)
  • BYA - D678 Duplicate Key for all Byan Lock Assy
  • BYA - F568 SNAP RINGS
  • BYA - F569 FLAT WASHERS
  • BYA - F574 Mounting Plate
  • BYA - F728 PISTON COVERS 600
  • BYA - G110 Relay and base shadow 115V
  • BYA - G500 Electrical Connector Cover
  • BYA - G575 Tapered Rear Mounting Pin with lock nut
  • BYA - G576 Tapered Front Mounting Pin with lock nut
  • BYA - H573 Lock Cap Assembly (Cover and Keys)
  • BYA - H574 Tapered mounting plate
  • BYA - H585 Lock nut 30106.116.472.X
  • BYA - H589 I-Bolt complete with lock nut
  • BYA - H727 Plastic End Cap
  • BYA - H734 End Cap Screw
  • BYA - H830 Bracket: Adaptor Bracket
  • BYA - H831 Piston Cover for the 900A Arm
  • BYA - H833 Adaptor Mounting Screw
  • BYA - MC2005 Capacitor, 40UF
  • BYA - PT150 Bracket, Adj Rear Mounting
  • BYA - PT160 Adjustable Rear mounting Pin
  • BYA - PT687 16MM swivel Joint front pin
  • BYA - Repair fee Repair fee only
  • BYA- H832 Commercial Piston cover (Long)
• Delta Scientific
  • DEL - 7579-00 AG812 Circuit Board
• DoorKing
  • DOO - 0601-120 Power cord cable, 6002-080 (per foot)
  • DOO - 1000-048 Battery Cable Assy for 1000 Inverter
  • DOO - 1200-010 Bearing: Flange Bearing
  • DOO - 1200-023 Electrical Outlet Plug
  • DOO - 1200-028 Power Outlet: 120VAC, Snap in Replacement Part
  • DOO - 1473-121 PCB: Circuit Board, Convenience Open
  • DOO - 1496-010 Terminal Board: for 6002 Actuator Arm
  • DOO - 1506-071 Entrapment Alarm (Buzzer)
  • DOO - 1601-007 Terminal Strip, 14 Pin (1601 board)
  • DOO - 1601-010 PCB: Circuit Board (model 1601)
  • DOO - 1601-016 Mounting Plate magnet
  • DOO - 1601-017 Collar: Sandwich' Plate
  • DOO - 1601-018 Pulley: for 1601 gearbox
  • DOO - 1601-019 Keyway
  • DOO - 1601-026 V-Belt: 4L260, AX24 (1601)
  • DOO - 1601-027 Gearbox: for 1601 Operator
  • DOO - 1601-029 Link: Connecting Link
  • DOO - 1601-032 Bushing: Bronze (Bearing) for 1601
  • DOO - 1601-041 Toggle Switch
  • DOO - 1601-044 Magnet Holder 1601
  • DOO - 1601-047 V-Belt: 4L270, AX25 (1601-380)
  • DOO - 1601-060 Sealed Bearing 1/2 id x 1-1/8 od
  • DOO - 1601-068 Arm: ADAPTOR (use only with plastic arms)
  • DOO - 1601-069 Arm: ADAPTOR (use only with wood arms)
  • DOO - 1601-075 Door: White - for 1601 Parking Gate
  • DOO - 1601-093 Kit: Fan Kit for 1601-1602-1603
  • DOO - 1601-097 Locking Plate Washer 1601
  • DOO - 1601-100 Cabinet: for 1601 Barrier
  • DOO - 1601-110 Pulley: 4-1/2" OD 5/8" Bore for 1601-380
  • DOO - 1601-121 Cable: for arm on 1601
  • DOO - 1601-122 Turnbuckle for the 1601
  • DOO - 1601-123 Clamp: for the 1601
  • DOO - 1601-124 Thimble bare end for the 1601
  • DOO - 1601-126 Nut 8x1.25mm RH Stainless
  • DOO - 1601-127 Nut 8x1.25mm LH Stainless
  • DOO - 1601-139 Bearing Holder
  • DOO - 1601-140 On/Off Toggle Switch for 9210 Operator
  • DOO - 1601-141 Toggle switch 3 pole on/off
  • DOO - 1601-144 Bracket: for motor and BBU motor for 1601
  • DOO - 1601-155 Motor: for 1601, 1/2 HP Dual Pulley
  • DOO - 1601-156 Motor: for 1601, 1/2 HP Single Pulley
  • DOO - 1601-157 Motor: 1/2 HP Asy w/ Crank Pulley for 1603
  • DOO - 1601-163 Cable Clamp 1/8 Diameter Round
  • DOO - 1601-165 Bolt: Hex Head 1/2-13x1-1/2 Tap
  • DOO - 1601-185 Race Washer .515 ID .875 OD
  • DOO - 1601-206 Octagonal Arm Connector, 2 ft
  • DOO - 1601-210 Cap: End Cap for Aluminum Arm
  • DOO - 1601-222 Shaft Assembly 1601, Splined
  • DOO - 1601-230 Mount Plate Gearbox - for 1601-380/381
  • DOO - 1601-250 Bracket: Magnet Holder 1601 Conv Open
  • DOO - 1601-251 Magnetic Sensor (Brown/White wires)
  • DOO - 1601-252 Bracket Sensor: 1601 (Conv Open)
  • DOO - 1601-253 Magnetic Sensor (no wires)
  • DOO - 1601-254 Magnetic Sensor (Yellow/White wires)
  • DOO - 1601-256 Magnetic Sensor (Red/White wires)
  • DOO - 1601-257 Magnetic Sensor (Purple/White wires)
  • DOO - 1601-258 Magnetic Sensor (Grey/White wires)
  • DOO - 1601-261 Magnetic Sensor (Orange/Grey wires)
  • DOO - 1601-263 Magnetic Sensor, Recess Yellow
  • DOO - 1601-270 Manual Crank Kit
  • DOO - 1601-278 Pivot Tube Octa Arm Support
  • DOO - 1601-280 Arm: Mounting Bracket Round Arm (Aluminum arm)
  • DOO - 1601-281 Barrier Arm Hub Cover (White)
  • DOO - 1601-295 Kit: Break-Away Hardware Kit, for Octagon Arms
  • DOO - 1601-357 Assembly: Elbow Assembly Round Non LED
  • DOO - 1601-360 Hub Steel Kit - improved, welded steel, not cast part 1601-079
  • DOO - 1601-400 Magnetic Contact. Replacement Used w/ DK Breakaway Arm
  • DOO - 1601-472 Arm: Plastic, 6 Ft Section, Red/White Stripping (Non MUTCD)
  • DOO - 1602-003 Arm: Counter Weight Plate for 1602 Barrier Arm
  • DOO - 1602-004 Arm: Cover Plastic Weight Counter
  • DOO - 1602-016 Mount Plate for 1602 Gearbox
  • DOO - 1602-031 Link: Connecting Link
  • DOO - 1602-050 Pulley: Dual 8 1/4", OD 7/8
  • DOO - 1602-071 V-Belt: 4L330, AX31 (1602, 2 req)
  • DOO - 1602-115 Top Mounting Plate for 1602
  • DOO - 1602-118 Arm: Alum, 7ft Assy. R/W (replacement arm only)
  • DOO - 1602-120 Arm: Aluminum, 10.5 ft. Assembly R/W
  • DOO - 1602-123 Gearbox: for 1602 operator
  • DOO - 1602-125 Cable: Stainless Steel 14'
  • DOO - 1602-131 Cable Clamp: 1/8" SS
  • DOO - 1602-143 Arm: Alum, 14ft Assy. R/W (replacement arm only)
  • DOO - 1602-210 Pin, UHMW Shear Assy
  • DOO - 1602-231 Wishbone Assembly
  • DOO - 1602-246 Harness Adapter 3 to 1
  • DOO - 1602-248 Harness Long Adapter
  • DOO - 1603-011 V-Belt 25.2 Cogged - for 1603-180 operator
  • DOO - 1603-168 Drive Extension 18"
  • DOO - 1603-170 Tunnel Extension 18" for 1603 Auto-Spike System
  • DOO - 1603-504 Transformer: 115V to 24V, 1603 Traffic Signal
  • DOO - 1610-030 Replacement Spike for 1610-080
  • DOO - 1610-031 Replacement Spring For Traffic Spikes
  • DOO - 1610-040 Rod Steel .375"x72" Zinc Plate
  • DOO - 1610-102 Top Plate: Traffic Spikes-Spring Loaded 6FT
  • DOO - 1610-103 Top Plate: Traffic Spikes-Weighted 6FT
  • DOO - 1610-150 Speed Bump (6 foot section)
  • DOO - 1615-015 Socket-Lampholder for 1615-080
  • DOO - 1620-020 Counterweight: 1620-025 counterweight, right for 1620 Secondary Barrier Arm.
  • DOO - 1620-025 Arm: counterweight, left, for 1620 Secondary Barrier Arm.
  • DOO - 1620-058 Lane Barrier Lower Arm Assembly, 14 ft
  • DOO - 1625-598 Hub Weld Assembly
  • DOO - 1702-503 lock Cam, Flat, 1-1/4"
  • DOO - 1702-507 Lock Cam, "J" Hook shape
  • DOO - 1702-509 Lock Cam for 9200
  • DOO - 1702-515 Cam Lock, Off Set
  • DOO - 1702-517 Lock Cam, Bended shape
  • DOO - 1804-024 Micro Switch
  • DOO - 1810-006 WINDOW 1810 DISPLAY
  • DOO - 1860-073 Bridge Rectifier for 6524 & 9024 Operators
  • DOO - 2010-100 Enclosure:
  • DOO - 2355-010 PCB: Circuit board for 1000 Power Inverter
  • DOO - 2599-100 Metal Warning Label
  • DOO - 2600-018 Housing Endless Idlers
  • DOO - 2600-053 Bearing:
  • DOO - 2600-054 Spacer 3/4in OD (incl in 2600-263 Kit)
  • DOO - 2600-061 Collar: for 6100 Drive Shaft
  • DOO - 2600-073 Magnetic Counter Ring
  • DOO - 2600-084 Bearing: Thrust 5/8" ID
  • DOO - 2600-085 V-Belt: 4L360, AX34 (Old 600)
  • DOO - 2600-086 V-Belt: 4L280, AX26 (605,6050)
  • DOO - 2600-088 Collar: 5/8" w/ Set Screw for Swing Gates
  • DOO - 2600-089 V-Belt: 4L300, AX28 (6050/6100)
  • DOO - 2600-102 Motor Capacitor 50 uF
  • DOO - 2600-103 Motor Capacitor, 65 uF, 1 HP (Older version)
  • DOO - 2600-124 Motor: 1/2 HP, w/Dual Pulley
  • DOO - 2600-126 Motor: 1/2 HP 120VAC
  • DOO - 2600-129 Motor: 1/2HP 120V (6100, 6300, 9100, 9150)
  • DOO - 2600-131 Washer- Terminal 8 Pin
  • DOO - 2600-147 Spacer Steel .75"ODx.53IDx.56L
  • DOO - 2600-156 Motor: 1/2 HP 115 VOLT
  • DOO - 2600-162 Motor: 1HP, 120 VAC
  • DOO - 2600-163 Motor: 1HP, Dual Pulley for 1602-080
  • DOO - 2600-165 Shaft for 630 or 6300 = Shaft Cross Keyed 6300
  • DOO - 2600-166 Shaft - cross keyed
  • DOO - 2600-173 Motor: 1HP for 9310
  • DOO - 2600-174 Main shaft assembly for 630 and 6300
  • DOO - 2600-179 Release handle 6050, 6100 & 6300
  • DOO - 2600-183 Washer Bellville 1.5" OD x .5" ID
  • DOO - 2600-197 Replacement Motor for the w/battery back up
  • DOO - 2600-219 Pulley: 1-3/4 Pulley for 9310 Shaft
  • DOO - 2600-220 Paint, White Touchup
  • DOO - 2600-234 Capacitor: 30uf
  • DOO - 2600-242 Motor Capacitor 60 uF, 1 HP, (Current version)
  • DOO - 2600-254 Limit Nut Plastic, 1/2 inch with Magnet Assembly
  • DOO - 2600-259 Limit Nut, Bronze (9300 and 9310)
  • DOO - 2600-260 Mounting Pipe
  • DOO - 2600-271 Chain Stop fits # 40 and # 41 chain
  • DOO - 2600-278 Motor: 1hp, 115v, (9200)
  • DOO - 2600-280 Motor: 1 HP, 230VAC 1 PH (3-wire)
  • DOO - 2600-287 Worm Drive, 2 Shoulder, 6100/6300
  • DOO - 2600-295 Motor: for the 9210-092
  • DOO - 2600-299 Torsion Rod (Individual rod only)
  • DOO - 2600-309 Gear Bevel 15 tooth Bored 3/4"
  • DOO - 2600-317 Sprocket: 25 Tooth, 1 1/4 inch Bore, #35
  • DOO - 2600-323 Worm gear 80 tooth Delrin (6050-6100)
  • DOO - 2600-329 Sprocket: 20 Tooth, 1 1/8" Bore, #40
  • DOO - 2600-335 Idler bushing 9210,9220
  • DOO - 2600-342 Clutch Pad: (4" OD)
  • DOO - 2600-344 Washer 1-1/8" od x 3/4" id
  • DOO - 2600-345 Hardened Washer
  • DOO - 2600-348 Gear Reducer: 920/9200
  • DOO - 2600-355 Sprocket: #60 Chain Sprocket for 9210/9220
  • DOO - 2600-357 Sprocket Hub for 920 P1x1 1/4 inch.
  • DOO - 2600-360 Assembly: Counter Wheel Mag Assembly
  • DOO - 2600-364 Gear Box: for 1150 Overhead Operator
  • DOO - 2600-366 Sprocket: 12 tooth, 1" bore for #41 chain
  • DOO - 2600-368 Magnet, 25"dx.125"th, 9000 Series
  • DOO - 2600-374 Magnet, Nickle Plate for 1601-080 Barrier Op
  • DOO - 2600-380 Sprocket: 60P16H for Model 9210(2600-380)
  • DOO - 2600-384 Motor Assy 1 HP Bi-Pulley Crank
  • DOO - 2600-388 Gear Box: 10:1 for 9530
  • DOO - 2600-394 Idler wheel (9210,9220)
  • DOO - 2600-395 Chain Sprocket for 9210,9220 #50 chain
  • DOO - 2600-398 Idler Wheel UHMW (9300, 9310)
  • DOO - 2600-402 Switch, On/Off Snap-In type, SP
  • DOO - 2600-408 Switch, On/Off, Snap-In type, DP
  • DOO - 2600-414 Terminal Strip, 2 Pin, 110/120v
  • DOO - 2600-428 V-Belt: 4L360, AX34 (805, 810, 6300)
  • DOO - 2600-429 V-Belt: 4L370, AX35 (910, 915, 9070, 9100)
  • DOO - 2600-440 Bearing: for Slide Operator
  • DOO - 2600-442 Chain: #40 20
  • DOO - 2600-446 Spring: 2600-446 Compression Spring
  • DOO - 2600-448 Chain: #60 20'
  • DOO - 2600-454 Bearing Holder (Plastic) Front
  • DOO - 2600-455 SOLENOID BRAKE
  • DOO - 2600-466 Rear Bearing Assembly
  • DOO - 2600-475 Chain: #41 SS
  • DOO - 2600-485 Chain: #50 20 FEET
  • DOO - 2600-487 Solenoid support bracket
  • DOO - 2600-488 Solenoid Lock Pin Sleeve
  • DOO - 2600-506 Bracket: Flange Bracket, Plated (Black)
  • DOO - 2600-526 Bracket: Cam Stop 9200
  • DOO - 2600-527 Bracket: Limit Switch 9200
  • DOO - 2600-533 lockable switch cover
  • DOO - 2600-540 Pin: Actuator Bracket Pin
  • DOO - 2600-541 Pin front model 6001 mounting
  • DOO - 2600-542 Hinge Post Mtg Brkt, 6002 Oper
  • DOO - 2600-543 Bracket: Gate Mtg Bracket, 6002 Oper
  • DOO - 2600-544 Allen Wrench 2.5mm Mod 601
  • DOO - 2600-547 Allen Wrench 6mm
  • DOO - 2600-555 Relay: 1603-210 Red/Green
  • DOO - 2600-562 magnet plate, limit 6010 & 6020
  • DOO - 2600-567 Pulley Wheel for 6050
  • DOO - 2600-568 Pulley: 8 inch, Replaces 2600-678
  • DOO - 2600-569 Pulley: 10" Cast Iron AC100X5/8
  • DOO - 2600-630 Joint Cover Swinger Left
  • DOO - 2600-631 Joint cover swinger right
  • DOO - 2600-633 Bearing Support Crosshaft
  • DOO - 2600-635 Mounting Plate (6100 Post Mnt)
  • DOO - 2600-638 Bracket: Radio 610 BBU
  • DOO - 2600-643 Baseplate: 6050/6100
  • DOO - 2600-644 Worm Gear, 100 Tooth, Delrin (6300)
  • DOO - 2600-648 Spare Key (H 201) 6001, 6002 Arm
  • DOO - 2600-664 Baseplate: Concrete, BBU
  • DOO - 2600-666 Bearing: Thrust Bearing 1.015ID
  • DOO - 2600-675 Main Shaft Assembly for the 6100
  • DOO - 2600-680 Clutch Plate: (7" Diameter AL)
  • DOO - 2600-681 Clutch Plate: 9" Die Cast Clutch Plate
  • DOO - 2600-688 V-Belt: 4L170, AX15 (DKS BBU, various models)
  • DOO - 2600-690 V-Belt: 4L310, AX29 (1602)
  • DOO - 2600-694 V-Belt: 4L380, AX36 (9150)
  • DOO - 2600-698 Motor Harness
  • DOO - 2600-705 Motor mount base plate for 6300
  • DOO - 2600-710 Chain Bracket
  • DOO - 2600-711 Bracket: Gate Brkt (all Swing Operators)
  • DOO - 2600-714 Arm: Connecting Arm, 60" Black (6050,6100,6300)
  • DOO - 2600-716 Crank Arm, 30" Black (6050/6100,6300)
  • DOO - 2600-718 Gear Box: for 1602 Barrier Arm
  • DOO - 2600-719 Gearbox: Splined For 6500
  • DOO - 2600-720 Elbow Flange: Black (6050,6100,6300, 6550)
  • DOO - 2600-721 Plastic cover for 6050/6100 non-BBU only. (for BBU see 2600-722)
  • DOO - 2600-725 Plastic cover for 6300
  • DOO - 2600-731 Gasket: Switch Cover
  • DOO - 2600-732 Nameplate, plastic: DKS, Large
  • DOO - 2600-734 DKS plastic emblem
  • DOO - 2600-760 Base Center Plate Surface
  • DOO - 2600-770 GREASE MOLLY D EP
  • DOO - 2600-779 Crank Arm: Die Cast (6050, 6100, 6300)
  • DOO - 2600-780 Left support leg for 6050/6100
  • DOO - 2600-781 RIght support leg for 6050/6100
  • DOO - 2600-783 Arm: MUTCD Red/White Retro-Reflective Tape for Barrier Arms
  • DOO - 2600-793 Hole Plug Blk Nylon 1.00" dia
  • DOO - 2600-808 Bearing: Bronze, 0.75 OD x 0.5 ID x 1.375.
  • DOO - 2600-809 Endless Idler: UHMW (Wheel only)
  • DOO - 2600-815 Drive Shaft: for 815
  • DOO - 2600-817 Magnet (Limit Sensor)
  • DOO - 2600-826 12 Position Term. Strip for 9050/9070
  • DOO - 2600-829 SPRING COMPRESSION
  • DOO - 2600-836 V-Belt: 5L370, BX35 (9150 pre 2002)
  • DOO - 2600-837 Motor Base 1 HP
  • DOO - 2600-838 Motor Base 1/2 HP
  • DOO - 2600-847 RESISTOR (1 ohm, 65 watt)
  • DOO - 2600-848 RESISTOR (1 ohm, 30 watt)
  • DOO - 2600-852 Kit: Accessory Kit for 9150
  • DOO - 2600-860 Solenoid Lock Assembly for 9050/9070/9100/9150
  • DOO - 2600-862 Kit: Fail Secure Lock Kit 9050 9070 9100
  • DOO - 2600-865 Kit: Fail Secure lock kit 9150
  • DOO - 2600-871 Bushing:
  • DOO - 2600-875 Capacitor Mounting Clamp
  • DOO - 2600-886 Idler Wheel
  • DOO - 2600-888 Bushing: for 9300
  • DOO - 2600-903 Main Shaft Assembly (9050, 9070, 9100) Short Shaft.
  • DOO - 2600-904 Main Shaft Assembly (915, 9150) Long Shaft.
  • DOO - 2600-908 Magnet, Retangular
  • DOO - 2600-909 Shaft for the 9200
  • DOO - 2600-917 Limit Counter Magnet Assy
  • DOO - 2600-922 Idler Bracket Right
  • DOO - 2600-930 Shaft support bracket (905-9100)
  • DOO - 2600-931 Shaft support bracket
  • DOO - 2600-932 Replacement Cover (9150 Operators)
  • DOO - 2600-933 Cover/Door for Doorking 9100
  • DOO - 2600-945 Cover: Plastic for Limit Window
  • DOO - 2600-951 Poly Cover for 9150-385, 1 HP Operator
  • DOO - 2600-957 Pulley: 10" Aluminum Assy
  • DOO - 2600-959 Pulley: 10" Aluminum Assy (older 9150 pre-2002)
  • DOO - 2600-961 Chain Link Gate Bracket
  • DOO - 2600-965 Bracket: Idler Left for 9150
  • DOO - 2600-966 Bracket: Idler Right for 9150
  • DOO - 2600-970 STOP BRACKET
  • DOO - 2600-971 Bracket: Gear Box Left Mod 920
  • DOO - 2600-972 Bracket: 9200/20/30/40
  • DOO - 2600-984 Housing for 9150
  • DOO - 2600-985 Housing, (Metal Chassis), 9050, 9070, 9100
  • DOO - 2600-986 wiring harness for 9150 1/2 HP
  • DOO - 2600-987 Wire Set for 9150-080 1HP
  • DOO - 2600-988 Wire Set, 9100
  • DOO - 2600-989 Wiring Harness for 9050/9070
  • DOO - 2600-990 Neoprene Flat Washer 1.25 x .725 x .125
  • DOO - 2601-101 Keyway, .25"x.25"x1"
  • DOO - 2601-110 V-Belt: 4L310, AX29 (9000)
  • DOO - 2601-112 V-Belt: 4L320, AX30
  • DOO - 2601-120 Shaft 1/2-13 UNC Threaded
  • DOO - 2601-125 Nut Plastic Traveling
  • DOO - 2601-188 Spring Partial Limit Mag Clip, Partial Open, 9000 Series
  • DOO - 2601-199 Motor Assy DC 30V Model 9024
  • DOO - 2601-201 Motor: 30VDC, 1/2 HP for 6524-380 Swing Gate Operator
  • DOO - 2601-226 Sprocket 9 Tooth 35 Chain
  • DOO - 2601-233 Sprocket, 32 Tooth
  • DOO - 2601-235 Gearbox: Clutch 9000
  • DOO - 2601-237 Motor: 1 HP Emerson for 9000 Operator
  • DOO - 2601-240 Micro switch for Limits for 6400
  • DOO - 2601-241 Switch, Micro, Water Resistant
  • DOO - 2601-254 Mechanical Disc Brake
  • DOO - 2601-261 Motor: 5 HP Motor 9550 Series
  • DOO - 2601-263 Motor: 2HP Emerson
  • DOO - 2601-264 Motor: Emerson J63WZBKC-192, 3HP
  • DOO - 2601-266 Gearbox: 30:1 Model 9200's
  • DOO - 2601-268 Chain: #80, 10 Ft
  • DOO - 2601-269 Chain: #80, 20ft
  • DOO - 2601-290 V-Belt: 5L640, BX62 (6550)
  • DOO - 2601-300 Pulley: 2" B Belt
  • DOO - 2601-305 Gear Box: for 6550 Operator
  • DOO - 2615-005 Bolt: Hex Head 1/4-20 x 1
  • DOO - 2615-008 Bolt: Hex Head
  • DOO - 2615-015 Bolt: Hex Head 1/4-20 x 3"
  • DOO - 2615-053 Bolt: Hex Head 3/8-16 x 1 1/4
  • DOO - 2615-053 Screw Phillips Head 10-32 x 2 1/2
  • DOO - 2615-059 Bolt: Hex Head 3/8-16 x 4"
  • DOO - 2615-155 Hex Head Bolt 5/16-18 x 1-3/4"
  • DOO - 2615-184 Bolt: Hex Head 1/2-13 x 2 1/4 GR8
  • DOO - 2615-188 Bolt: Hex Head1/2-13 x 3 1/2, Tapped
  • DOO - 2615-260 Bolt: Flange Lock 3/8-16x1/2, SS
  • DOO - 2615-346 Bolt: Eye Bolt, Turned 3/8-16x4"l
  • DOO - 2615-430 Bolt: Hex Head, Flat, 3/8 - 16 3/4 SS
  • DOO - 2615-645 Bolt: Carr SS 10-32 x 5/8 Painted
  • DOO - 2615-883 Bolt: Hex Socket 1/2-13x1
  • DOO - 2616-001 Screw, Phillips Head 6-32 x 3/8
  • DOO - 2616-052 Screw Phillips Head 10-32 x 1/2
  • DOO - 2616-062 Screw, Phillips Head 10-32x3.0"
  • DOO - 2616-441 Screw Self Taping #8x3/4" Phillips
  • DOO - 2616-580 Nut Barrel 5/16-18 Thread
  • DOO - 2616-810 Chain Bolt: #41 Chain
  • DOO - 2616-815 Chain Bolt: # 50 and or # 60 Chain
  • DOO - 2620-019 Washer: 3/8 SAE Flat Washer
  • DOO - 2620-021 Washer 1/2" SAE
  • DOO - 2620-030 Washer: 1/2 inch USS
  • DOO - 2620-032 WASHER
  • DOO - 2620-036 Washer, 1.483 OD x .813 ID x 116T, Use with 2616-815
  • DOO - 2620-045 Washer Split Lock 1/4 SS
  • DOO - 2620-047 Washer: 3/8 lock washer
  • DOO - 2620-050 Washer Split 1/2
  • DOO - 2620-075 Washer SS 1-1/8ID 1-5/8OD
  • DOO - 2620-076 Washer 1.125IDx1.63ODx.125T
  • DOO - 2620-131 Washer 1 7/8in OD (incl in 2600-243 Kit)
  • DOO - 2620-220 Washer Bronze
  • DOO - 2620-320 Nut
  • DOO - 2620-340 Nut Center Lock 1/4-20
  • DOO - 2620-405 Hex Nut 3/8-16
  • DOO - 2620-407 Nut
  • DOO - 2620-409 Nut Hex Flange
  • DOO - 2620-411 Hex Flange Lock Nut
  • DOO - 2620-420 Nut FOR 2615-807
  • DOO - 2620-430 Nut, Hex 3/4"-10. Use with 2616-815
  • DOO - 2620-440 Hex Nut 1/2-13 Grade 8
  • DOO - 2620-490 Nut Jam 1/2 - 13
  • DOO - 2630-007 Snap Ring
  • DOO - 2630-010 Snap Ring 1.25"
  • DOO - 2630-011 1' Snap ring for 9300
  • DOO - 2630-015 snap ring 5/8 5100-62-zy
  • DOO - 2801-002 Clutch Pad: (7" OD) Used on Models 605-610 and 6050-6100
  • DOO - 2801-003 Clutch pad: for the 6300
  • DOO - 2801-004 Clutch Pad: (5" OD, 3/4" ID) Used on Models 0915, and 9150
  • DOO - 2802-003 Washer #8 SAE
  • DOO - 2901-002 Terminal Strip: 18-Pin
  • DOO - 2902-003 Nut
  • DOO - 2902-006 Nut, Nylon Lock, 10-32
  • DOO - 2902-013 Nut Nylon Lock 5/8-11 (6006 Carriage bolt)
  • DOO - 2904-006 Screw, Round Head 4-40 x 7/8
  • DOO - 3003-010 Counter Board: Magnetic
  • DOO - 3004-010 Counter Probe: Magnetic
  • DOO - 3004-020 Magnetic Counter Kit
  • DOO - 3129-002 Terminal Block Cover 2 Position
  • DOO - 3129-005 Cover: Terminal Strip, Heavy Plastic
  • DOO - 3130-008 Terminal Block 5 Position
  • DOO - 4001-020 Terminal Strip: 20-PIN
  • DOO - 4001-035 Cam Lock & Key Assy (16120)
  • DOO - 4001-038 Lock & Key Assy
  • DOO - 4001-039 Lock & Key Assy
  • DOO - 4001-041 Lock & Key Assy
  • DOO - 4001-042 Lock & Key Assy
  • DOO - 4001-043 Lock & Key Assy
  • DOO - 4001-044 Lock & Key Assy
  • DOO - 4001-045 Lock & Key Assy
  • DOO - 4001-046 Lock & Key Assy
  • DOO - 4001-047 Lock & Key Assy
  • DOO - 4001-048 Lock & Key Assy
  • DOO - 4001-055 Lock & key Assy, (16001) for Gate Operator Products
  • DOO - 4001-087 Transformer: 460/230/208-115VAC.
  • DOO - 4001-089 Transformer Toroid 115/230, 24VDC
  • DOO - 4001-090 Transformer: Line Transformer for 4302 Controller
  • DOO - 4001-093 MOV Assy
  • DOO - 4001-110 Control Box: No Board
  • DOO - 4100-012 PCB: 6524, 9024 (Pre-UL 325 2016)
  • DOO - 4100-018 PCB: 6524, 9024 (UL 2018)
  • DOO - 4302-012 PCB: 6002-6004, 6400 (Pre UL 2016)
  • DOO - 4302-018 PCB: 6002-6004, 6400 (UL 2018)
  • DOO - 4302-043 Wire Set Actuator Control Box
  • DOO - 4302-100 Enclosure: Electrical Enclosure for 4302-111
  • DOO - 4302-315 Control Box: 24 VDC, for 6006, 6004, 6400 w/ 2 35 AMP Bat & PCB
  • DOO - 4402-010 PCB: 9300 w/limits
  • DOO - 4403-012 PCB; Gate Operator CB, Pre UL325 2016
  • DOO - 4404-012 PCB: 9210-9550, (Pre UL 2016)
  • DOO - 4404-018 PCB: 9210-9550, (UL 2018)
  • DOO - 4405-012 PCB: 6500, 9000, (Pre UL 2016)
  • DOO - 4405-018 PCB: 6500, 9000, (UL 2018)
  • DOO - 4502-009 PCB: 601-630 (Pre 2000)
  • DOO - 4502-012 PCB: 6100, 6300, (Pre UL 2016)
  • DOO - 4502-018 PCB: 6100, 6300, (UL 2018)
  • DOO - 4602-009 PCB: 910, 915 (Pre-2000)
  • DOO - 4602-012 PCB: 9100, 9150, (Pre UL 2016)
  • DOO - 4602-018 PCB: 9100, 9150, (UL 2018)
  • DOO - 4702-007 Protective cover for 4700 series circuit boards
  • DOO - 4702-009 PCB: PCB: 905, 907
  • DOO - 4702-012 PCB: 9050, 9070, (Pre UL 2016)
  • DOO - 4702-018 PCB: 9050, 9070, (UL 2018)
  • DOO - 6002-025 End Cap: for the 6002
  • DOO - 6002-060 Actuator: 6002 Actuator Motor Base
  • DOO - 6002-063 Motor Output Base for 6002
  • DOO - 6002-102 Shaft Cover for the 6002
  • DOO - 6002-140 Noise Filter Kit
  • DOO - 6002-501 Harness Assembly with Limit Switches for the 6002
  • DOO - 6003-050 Manual Release Key for 6003
  • DOO - 6004-010 Limit Cam for Door King 6004
  • DOO - 6005-012 Rear Mounting Fork/Pin Assembly for 6005 Actuator
  • DOO - 6006-092 Release Handle for 6006
  • DOO - 6006-105 Travel Nut Assembly for the 6006
  • DOO - 6006-235 Rear Mounting Bracket for the 6006
  • DOO - 6100-210 Worm Gear With 2 Clutch Discs
  • DOO - 6100-500 CK 6100 Housing Assy w/ Clutch
  • DOO - 6100-574 Hardware Pack for the Post Mount Kit
  • DOO - 6300-042 Housing assembly for 6300 operator
  • DOO - 6300-502 Housing Assembly w/ Clutch-Complete Top
  • DOO - 6400-040 Motor and drive gear for in-gound unit
  • DOO - 6400-500 Limit Switch Assembly
  • DOO - 6500-018 V-Belt: 4L180, AX16 (6500-082)
  • DOO - 6500-047 V-Belt: 4L470, AX45 (6524)
  • DOO - 6500-118 Shaft Support Assembly for 6500, 6524
  • DOO - 6500-123 Bushing: Lock Plate
  • DOO - 6500-140 Bushing: Brass, 1.375 R
  • DOO - 6500-145 Bushing: for 6500
  • DOO - 6500-157 Hub w/Shaft, Lrg, 1HP Splined for 1HP 6500 Models
  • DOO - 6500-162 Hub Extension Shaft Assy 6500/6524
  • DOO - 6500-175 Hub Clamp Small 1/2 HP Arm Half
  • DOO - 6500-180 Hub Clamp Small 1/2 HP
  • DOO - 6500-185 Release Screw Small Hub L
  • DOO - 6500-195 Hub Bar Holder Small
  • DOO - 6500-195 Tool Hub Clutch Release
  • DOO - 6500-220 Cover: Elbow Connector
  • DOO - 6500-255 Arm Connecting Rod, Lower
  • DOO - 6500-270 Bracket: "L" Bracket Arm for 6524
  • DOO - 6500-400 Sub Assy-Hub 1/2 HP
  • DOO - 6500-410 6500 Output shaft and hub assembly
  • DOO - 6500-420 Magnet Assembly Arm
  • DOO - 6500-430 Main arm assembly for the 6500 and 6524
  • DOO - 6500-440 Cover: Turret Sub Assembly
  • DOO - 6500-454 Cover: Front Slip and Lock
  • DOO - 6500-464 Cover: Back w/Labels for 6500 and 6524
  • DOO - 6550-430 Arm: Main Assembly for 6550 Operator
  • DOO - 6600-030 Bracket: Upper ABS Limit Switch
  • DOO - 6600-032 Limit Switch Bracket for DoorKing 6500
  • DOO - 6600-035 Limit Cam Arm
  • DOO - 7082-186 Wire Set for 6524 Swing Operator
  • DOO - 7082-188 Wire set for 9024 Slide Gate Operator
  • DOO - 7082-197 Wire Harness Alarm/Alarm Reset
  • DOO - 8080-105 Rubber Spacer, 5 Inch, White
  • DOO - 9000-156 Motor Assembly Includes1601-074
  • DOO - 9100-006 Cover: Clear Plastic Control Board Cover
  • DOO - 9150-006 Cover: Clear Plastic Control Board Cover
  • DOO - 9200-005 Cover: Plastic Limits
  • DOO - 9200-021 Limit Switch Enclo 1/2" Nut
  • DOO - 9200-022 Limit Switch Enclo 1" Nut
  • DOO - 9200-135 Heavy Duty Mounting Pedestal
  • DOO - 9200-421 Chain: #35, 21 inch, 56 Links in Length.
  • DOO - 9200-911 Housing 9210,20,30,40 Chassis
  • DOO - 9200-917 Control Panel: 9530 Speed Control Panel
  • DOO - 9200-932 Solid State Relay for 9210 Single Phase
  • DOO - 9200-933 Solid State Relay 3Ph (SGR3053DDG)
  • DOO - 9200-934 Solid state relay 3ph only
  • DOO - 9200-935 Cover: for Solid State Relay
  • DOO - 9210-044 Wire Harness 9210 Subassy SSR
  • DOO - 9210-144 Wire Set For 9210 Variable Speed
  • DOO - 9210-197 Resistor Assy. for 9000 series
  • DOO - 9210-418 Motor Drive, AC
  • DOO - 9210-420 Motor Drive Assy, AC, 460V3P 2HP(9210-420)
  • DOO - 9210-520 VFD Assy for the 9220, 2 HP, 1-Ph, 208VAC Operator
  • DOO - 9210-524 VFD Assy for the 9230, 3 HP, 3-Ph, 208VAC Operator
  • DOO - 9210-543 VF Drive Assy 460VAC 3P 15HP
  • DOO - 9350-150 Chassis for 9000 slide operator
  • DOO - 9350-179 Cover: Operator 9000
  • DOO - 9550-205 Cover: 10 ga Cover for 9550
• Dorene Gate Openers
  • DOR - OP-CAP Capacitor
  • DOR - OP-CB Chain Bolt:
  • DOR - OP-E1 Motor: Emerson, 110V, 1/2 HP for 3520 & 3540 Ops.
  • DOR - OP-LN-30 Limit Nut Small 3020HX
  • DOR - OP-LN35 Limit Nut, Large
  • DOR - OP-LS Limit Switch
  • DOR - OP-LS-A Limit Box Assy. for the DR3020
  • DOR - OP-SPR-30HX Sprockt: Drive Sprocket With Keyway 3020HX
  • DOR - OP-SWA-3 Arm Bushing for Swing Operator
  • DOR - OP-SWA1 Complete Arm Kit
  • DOR - OP-TIA Chain Guide Idler W/Bearing
• Eagle Access Control Systems
  • EAG - E094 Limit Switch Box Assembly for Eagle 1000.
  • EAG - E103 Limit switch for Eagle -200
  • EAG - E106 Limit Assembly, Complete
  • EAG - E108 Limit Nut Eagle 1000/2000
  • EAG - E147 Pulley: Motor Pulley for Eagle 200
  • EAG - E168 Idler pulley for Eagle operator
  • EAG - E173 V-belt for Eagle 200
  • EAG - E181 Gear Reducer
  • EAG - E186 Secondary Gear Reducer
  • EAG - E209 1/2hp Motor EAG - E209 1/2hp Motor Eagle 1000 Short Shaft
  • EAG - E210 Motor: Emerson 1HP, 115V
  • EAG - E213 Secondary Gear Reducer, Eagle II
  • EAG - E216 Motor: 24VDC
  • EAG - E217 Limit Switch Assembly Complete For Eagle I
  • EAG - E220 Operator Cover: Eagle 1
  • EAG - E255 MOTOR PULLY
  • EAG - E257 Manual Override Hand Crank
  • EAG - E280 V-Belt: (Model 2000 Operator)
  • EAG - E283 Belt for Slide Operator
  • EAG - E285 Replacement Belt for Eagle 1000FSC
  • EAG - E294 Control Box Cover-Eagle 1
  • EAG - E555 PCB: Diamond Control Board (AC machines)
  • EAG - E600 PCB: Diamond Control Board (DC Operators) - limited to stock on hand
  • EAG - E721 Arm Hub for Eagle 100
  • EAG - E722 Limit cup w/ pin for Eagle-100
  • EAG - E723 Sprocket (PGR)
  • EAG - E723-A PGR Sprocket
  • EAG - E724 Eagle-100 & 200 Pillow Block
  • EAG - E728 Limit Chain Eagle 100/200
  • EAG - E731 Arm Hub
  • EAG - E732 Plastic Cup for Eagle Swing Gate Operators
  • EAG - E775 Extension Arm, Gold
  • EAG - EG002 AC Mini Board I with Transformer
  • EAG - EG003 External transformer for AC Mini Control Board
  • EAG - X9014 Limit Switch X9DC
• FAAC International, Inc.
  • FAA - 104579 390 Operator only
  • FAA - 1067702 760 Standard Operator Only 115V (discontinued)
  • FAA - 107725 750 CBAC Pump Motor Assembly, 115V
  • FAA - 1077251 750 CBAC Pump Motor Assembly, 230V
  • FAA - 108758 750 Drive Unit 180 Degree
  • FAA - 202025 PCB: E024U Control Board
  • FAA - 2036 Nut Short Pin 400/402/422 8mm Lock
  • FAA - 20771515 Motor Pump, 230V 1L w/o Sensor for 640 Op
  • FAA - 20774715 Motor Pump Assembly 220V 1.5 Lt. 620/640 w/o Sensor
  • FAA - 2167.1 Seal Kit 400
  • FAA - 2168* Seal Kit 402
  • FAA - 2171* Seal Kit 750 Drive
  • FAA - 2172* Seal Kit 422
  • FAA - 2181.1 Seal Kit S450H
  • FAA - 2182.1 Seal Kit (Rebuild) for S800H In-Grnd Operator.
  • FAA - 2198 Fuse: C721/E721, 2A 250V 5x20 Slow Blow
  • FAA - 2357 Surge Protector Accessory DTK-4LVLP-LV
  • FAA - 2359 Enclosure FG 12x10x6 NEMA4 w/ backplate
  • FAA - 2479 Enclosure: Metal, 20x16, On/Off SW & Outlet (no board)
  • FAA - 2649 FUSE 800mA,450MPS, F2
  • FAA - 2685.1 S800 Encoder/Upgrade retro fit it to ENC.
  • FAA - 2705 Capacitor 115V 25 uF
  • FAA - 2706 Capacitor 220V 16 uF (Older units)
  • FAA - 2707 Capacitor 220V 8 uf (Newer units)
  • FAA - 2850.1 Sequencer for Parking Barrier Gate B680H
  • FAA - 3204425 Pump, 1.0 LT
  • FAA - 3204435 Pump, .75 LT
  • FAA - 3204445 Pump, 1.5 LT
  • FAA - 3300 Enclosure: Fiberglass, 16x14, Prewired 115V (no board)
  • FAA - 3312 Enclosure: Fiberglass, 16x14 (empty no backplate)
  • FAA - 3350 Enclosure: Fiberglass, 16x14, On/Off SW & Outlet (no board)
  • FAA - 3351.1 Upgrade Kit 425D to E024U w/o batteries
  • FAA - 3533 Battery: 6V, 12 Ah (1050 & Old (05) 700i)
  • FAA - 3536 Battery: 12V, 7.2 Ah
  • FAA - 3632 770, Manual Release Key
  • FAA - 390035 S800H, Hydraulic Manual Release
  • FAA - 390039 Articulated Arm For 950BM
  • FAA - 390040 Sliding Pulling Arm Assembly 950BM
  • FAA - 390421.5 Flex hose connector kit
  • FAA - 390422 Flex Hose, 33 ft (750)
  • FAA - 390439 Flex Hose, 328 ft (750)
  • FAA - 3905515 Skinpack 760 Includes Dog House & Manual Release
  • FAA - 390682 Limit switch for 390 operator
  • FAA - 390700 Banjo Bolt Kit for FAAC 750 Connector for Flex Hose
  • FAA - 3907525 Bushing (lower) 750 Drive 760 Load Bearing Box
  • FAA - 3907535 Bushing & Seal (upper) Combo 750 Drive 760 Load Bearing Box
  • FAA - 390972 S800H, Splined Shaft Collar w/ Mnt bolts
  • FAA - 401051 Emergency bypass solenoid
  • FAA - 401064 (FA-XP30AC) XP 30 Adapters for Conduit Connection
  • FAA - 416020 B680H Cover Stainless Steel
  • FAA - 417010 Harness '08 (motor to electric cord)
  • FAA - 4180195 Manual Release 400/422
  • FAA - 4180205 Blank Lock Valve
  • FAA - 4180285 Shuttle Piston
  • FAA - 4180415 Bypass Cap w/Spring Newstyle '06
  • FAA - 4185045 Locking Cap - Cover, Base & Lock 400/422 '06 (#18)
  • FAA - 4350065 Piston Assembly 402
  • FAA - 4350085 Piston & Rod Assembly (422)
  • FAA - 4350105 Piston Assembly 400 Riveted
  • FAA - 4350115 Piston Assembly 400 EG Riveted
  • FAA - 4404085 Lock Valve Bi-Metal All Hydraulic Operators
  • FAA - 4404095 Bidirectional Inlet Valve 400/422 '06 to present
  • FAA - 4900605 Swivel Joint 422 w/ nut & bolt
  • FAA - 4900645 Rear Fork Package, Die Cast Alum w/ brass bolts
  • FAA - 490071 750 CP Box, for 750 in-ground (unified /complete box)
  • FAA - 4900985 Load Bearing Box 760
  • FAA - 490106 Mounting Hardware kit for 415 arm
  • FAA - 490108 Limit Switch Assy for FAAC 415
  • FAA - 490111 770, 180 Deg Opening Kit
  • FAA - 490114 ADAPTOR KIT FOR OLD 746/844
  • FAA - 4901204.1 Rack Nylon, 3.3 ft ea, 4 Pcs
  • FAA - 490139 B680H: Foundation Plate
  • FAA - 490326 Manual Release Kit 400 New lock cap '06 (#17)
  • FAA - 490327 Manual Release Extension & Bypass Adj 400/422 '06
  • FAA - 4994165 Flange Front 402/422
  • FAA - 4994365 Valve Body 402 '90 CBC
  • FAA - 499449 Flange 422 Mid
  • FAA - 4994625 Flange Front 400 use w/ FAAC Stops
  • FAA - 4994655 Valve Body 400/422 '90 CBAC
  • FAA - 63000013 Gasket for S450H
  • FAA - 63000056 Pinion Shaft
  • FAA - 63000065 Mount Bolt for S800 Foundation Box (2 bolt)
  • FAA - 63000083 Bracket, B680H L Arm
  • FAA - 63000084 Bracket Cover,B680H L Arm
  • FAA - 63000087 Bracket: Assembly for B680H
  • FAA - 63000088 B680H S Arm Bracket Cover
  • FAA - 63000112 B680H Hydraulic Hose Assembly (see details)
  • FAA - 63000113 B680H Pump Unit Cable
  • FAA - 63000115 S800H, Magnetic Disc
  • FAA - 63000116 S800H Cylinder Body
  • FAA - 63000117 B680 Manual Release Assembly
  • FAA - 63000119 Power Supply for B680H
  • FAA - 63000121 B680H Door Lock Assembly
  • FAA - 63000124 Tank cap for B680H
  • FAA - 63000129 B680H Hydraulic Unit
  • FAA - 63000131 B680H Rubber End Stop
  • FAA - 63000133 B680H Cylinder
  • FAA - 63000139 E680 Control Board Box Cover
  • FAA - 63000145 PCB: 740 Control Board
  • FAA - 63000154 Hydraulic unit gasket for B680H
  • FAA - 63000169 Spring S for Pivoting Round Barrier Arms
  • FAA - 63000172 B680H L Spring
  • FAA - 63000229 J275A Release Device Group
  • FAA - 63000244 B680H S Arm Cap
  • FAA - 63000247 L Arm End Cap for B680
  • FAA - 63000267 J200HA Rod Group w/Limit Switch for Bollard
  • FAA - 63000315 400 S450H Front Flange Seal
  • FAA - 63000333 Transformer: 115V, 746/844 to use with 780D Board
  • FAA - 63000376 S800H Motor and Flange Assembly
  • FAA - 63000559 S800H, Encoder ENC version
  • FAA - 63000709 Limit Sensor for FAAC 746
  • FAA - 63000711 780D Control Panel, 746/844 2004 115V (Replacement Only)
  • FAA - 63000714 PCB: B680H Control Board E680
  • FAA - 63000716 S450H Front Flange
  • FAA - 63001005 Electric Cord Plug-In (2008) UL all pump units
  • FAA - 63001009 Encoder for B680H
  • FAA - 63001035 Magnets; 1 Set for 746/844 Limits
  • FAA - 63001875 S450H Encoder
  • FAA - 63001885 S450H Skinpack
  • FAA - 63001905 Screw for Carter S450H
  • FAA - 63001915 Bracket: Rear for S450H
  • FAA - 63001925 S450H Bracket Covering
  • FAA - 63001935 S450H Moulded Cable Female Kit
  • FAA - 63001935 S450 Molded Cable Kit
  • FAA - 63001945 S450H Front Fastening
  • FAA - 63001955 Rear Eye Tie Rod for S450H
  • FAA - 63001965 (Discontinued) S450H Short Pin
  • FAA - 63001975 Spacers Kit for S450H
  • FAA - 63001985 Release Assy S450H
  • FAA - 63002435 E024U, BBU Cable
  • FAA - 63002455 S800H Cover Plate
  • FAA - 63003173 Transformer: C720, 115V
  • FAA - 63003206 Breaker-ON/OFF Switch for B680
  • FAA - 63003211 Capacitor: J355 M30, 50uf
  • FAA - 63003231 Bonded Seal Hydraulic Hoses
  • FAA - 63003294 J200HA Complete Lid
  • FAA - 63003296 J200HA Lid & Head Screw Set
  • FAA - 63003304 Cover Accessories
  • FAA - 63003326 750 CP Box Bushings Group
  • FAA - 63003331 Cover for 400 Group (Replaces 7272105 & 4170015)
  • FAA - 63003355 S418 Worm Screw Group
  • FAA - 63003361 Release Group mechanism for 760 Operator
  • FAA - 63003418 640 Plunger & Treaded Fork Group
  • FAA - 7011345 Bolt Mounting (top) 760 8mm X 110mm Stainless Steel
  • FAA - 7019115 TIE ROD 746/844
  • FAA - 7019345 Bolt Mounting (Bottom) 760 Stainless Steel
  • FAA - 7049005 Retainer (Threaded Brass)
  • FAA - 7073035 M10 Joint
  • FAA - 7073095.1 Swivel Joint Kit, Square, 4 Rod Positive stop
  • FAA - 7090290015 O ring (lock cylinder 400 CBAC)
  • FAA - 7090350025 O-ring Front Flange 402/422 34.6 x 2.62
  • FAA - 7090845 O ring extensions (400 CBAC)
  • FAA - 7090855 O ring (base to body 400 CBAC)
  • FAA - 7090865 O ring extension receptacle (400 CBAC)
  • FAA - 7093225 Dust Cover 750 Drive Unit/760 Load Bearing Box
  • FAA - 7095035 Piston Rod Packing 402/422/610
  • FAA - 7095075 Gasket 750 Drive/760 Load Bearing Box (Inner/Top) Red
  • FAA - 70991015 Gasket D80 400/402/422
  • FAA - 7102055 Ferrule Ring 750
  • FAA - 7109235 Strain Relief Kit Brass w/ nut all UL Operators
  • FAA - 7110015 Plug Oil 400/402/422 for Rear Flange
  • FAA - 7114025 Plug Protective Cover Fixing cap 402/422
  • FAA - 7119405 Cap For Holes Cover Carter
  • FAA - 7119475 Vibration Dampener, Rubber, (Long)
  • FAA - 7119485 Vibration Dampener, Rubber, (Short)
  • FAA - 713002 Key 402/620/640/750/760 Triangle Manual Release
  • FAA - 713009 Key 412/Domo Opers. Manual Release
  • FAA - 7131005 Key (Viro) 400/415/422/620/640/844/746/740, Manual Release
  • FAA - 714019 Hydraulic Oil (Pink Fluid) : FAAC, (-4 degrees)
  • FAA - 7140251 Hydraulic Oil: FAAC, Arctic Grade, (-40 degrees)
  • FAA - 7161825 Operator Body 400 Std '06 New Manual Release
  • FAA - 7161835 Operator Body for 400 EG
  • FAA - 7171485 Rear Flange, 08 (400/402/422) Plug-in Cord
  • FAA - 7182075 Pin Short 400/402/415/422
  • FAA - 7182175 Long Pin
  • FAA - 7182355 Pin Front Bracket 402
  • FAA - 719130 Pinion, Z16
  • FAA - 719167 Pinion, Z20
  • FAA - 7192465 Pinion Shaft 750 Drive 04 13 tooth
  • FAA - 7192475 Pinion 760 Load Bearing Box new Style 05 Bushing
  • FAA - 7193205 Rack 760
  • FAA - 720037 Housing Metal-Key Switch/Digicard/Digikey
  • FAA - 720043 Housing Plastic-Key switch/Digicard/Digikey
  • FAA - 7201295 Manual Release Housing 760 Doghouse
  • FAA - 720309 Hydraulic Pump Enclousre
  • FAA - 7220015 Bracket Rear 400/402/422
  • FAA - 7220355 Bracket Front w/ Bolt & Nut 400
  • FAA - 7220365 Bracket Front 400 EG
  • FAA - 7220515 Bracket Front w/ Bolt & Nut 422
  • FAA - 722471 Mounting Frame for the 390
  • FAA - 7228015.1 DISCONTINUED (see details) Rear Fork Kit, Nyl w/ Bolts/Nuts
  • FAA - 7230225 Tierod Cylinder 402/422
  • FAA - 7230295 Tierod Cylinder 400
  • FAA - 7230305 Tierod Cylinder 400 EG
  • FAA - 7271545 End Cap Protective Cover 402/422
  • FAA - 7272085 Protective Cover 402
  • FAA - 7272105 (Replaced by 6300.3331) Protective Cover 400
  • FAA - 7272115 Protective Cover 400 EG
  • FAA - 7272125 Protective Cover 422
  • FAA - 7275275 Cover Key 400/422 '06 New Manual Release
  • FAA - 728271 Front mounting bracket for 415 Operator
  • FAA - 72840065 Rear Mounting Plate and Mounting Bracket
  • FAA - 7290445 Manual Release Knob w/ screw 400/422 '06
  • FAA - 7309095 Splined Joint Collar New 13 Spline 750/760
  • FAA - 736060 Cylinder 412 Assembly Compression
  • FAA - 7361315 Retract Tube Aluminum 402/422
  • FAA - 7361335 Retract Tube Aluminum 400
  • FAA - 7366015 Cylinder Piston Long 400
  • FAA - 7366025 Cylinder, 400
  • FAA - 7366065 Cylinder for 402/422
  • FAA - 737607 Foundation Plate 750
  • FAA - 737816 746/844 Foundation Plate
  • FAA - 7450005 Operator Body 402
  • FAA - 746028 Rotor (Motor) for 412
  • FAA - 750007 E024U, Power supply board
  • FAA - 7514055 Electric Cord UL (400/402/422,750,760)
  • FAA - 77000415 Motor: 220V 16uF 1400 RPM 400/402/422/750/760/620
  • FAA - 77000425 Motor: 115V, 25uf, 1400 RPM 400/402/422/750/620/640
  • FAA - 7700205 Motor: 220V, 8uf, 1400 RPM 400/402/422/750/760/620
  • FAA - 785502 Decoder for Digicard Reader/Digikey (MD01)
  • FAA - 790919 PCB: 455D 115V, Control Board (Pre UL2017 ED. 7)
  • FAA - 7909212 780D Control Panel 746/844 2004 & After 220V
  • FAA - 790926 PCB: 455D 220V, Control Board (Pre UL2017 ED.7)
  • FAA - 790944 PCB: 455D 115V Control Panel UL2017
  • FAA - 790945 PCB: 455D 230V Control Panel UL2017
  • FAA - 799358 Collar Cylinder 412 w/ screws (each)
  • FAA - 799359 Motor Housing for 412 DX Top Section
  • FAA - 799360 Motor Housing for 412 SX Top Section
  • FAA - ECUINTA455 Interface board for 455D enclosures 115/230 VAC
  • FAAC - 63000264 J200HA Hydraulic Unit for J200HA Bollard
• GCI Tech Info/House Brand
  • GCI - 16120 Classic Key Spare Key (16120) Doorking Cam locks
  • GCI - 40B13 SPROCKET Sprocket: #40 Chain, 13 Teeth, 1" Diameter Shaft
  • GCI - 40B14 SPROCKET Sprocket: #40 Chain, 14 Teeth, 1-1/8" Diameter Shaft
  • GCI - 40B20 SPROCKET Sprocket: #40 Chain, 20 Teeth, 1" Diameter Shaft
  • GCI - 4L440 A/4L Belt Type X 1/2 " Top Width X 44" Outside Dia
  • GCI - 50B12 SPROCKET Sprocket: #50 Chain, 12 Teeth, 1-1/8" Diameter Shaft
  • GCI - A14 V-Belt: 4L160, A14 non-cogged JASON BELT
  • GCI - AX15 V-Belt: 17" - Cogged, Replacement for 4L170
  • GCI - AX16 V-Belt: 18" - Cogged, Replacement for 4L180
  • GCI - AX17 V-Belt: 19" - Cogged, Replacement for 4L190
  • GCI - AX18 V-Belt: 20" - Cogged, Replacement for 4L200
  • GCI - AX19 V-Belt: 21" - Cogged, Replacement for 4L210
  • GCI - AX20 V-Belt: 22" - Cogged, Replacement for 4L220
  • GCI - AX21 V-Belt: 23" - Cogged, Replacement for 4L230
  • GCI - AX22 V-Belt: 24" - Cogged, Replacement for 4L240
  • GCI - AX24 V-Belt: 26" - Cogged, Replacement for 4L260
  • GCI - AX25 V-Belt: 27" - Cogged, Replacement for 4L270
  • GCI - AX26 V-Belt: 28" - Cogged, Replacement for 4L280
  • GCI - AX27 V-Belt: 29" - Cogged, Replacement for 4L290
  • GCI - AX28 V-Belt: 30" - Cogged, Replacement for 4L300
  • GCI - AX29 V-Belt: 29" - Cogged, Replacement for 4L310
  • GCI - AX30 V-Belt: 32" - Cogged, Replacement for 4L320
  • GCI - AX31 V-Belt: 33" - Cogged, Replacement for 4L330
  • GCI - AX32 V-Belt: 34" - Cogged, Replacement for 4L340 Q039
  • GCI - AX33 V-Belt: 35" - Cogged, Replacement for 4L350
  • GCI - AX34 V-Belt: 36" - Cogged, Replacement for 4L360
  • GCI - AX35 V-Belt: 37" - Cogged, Replacement for 4L370
  • GCI - AX36 V-Belt: 38" - Cogged, Replacement for 4L380
  • GCI - AX38 V-Belt: 40" - Cogged, Replacement for 4L400
  • GCI - AX45 V-Belt: 47" Cogged Replacement for 4L470
  • GCI - BX24 V-Belt: 27" - Cogged, Replacement for 5L270
  • GCI - BX26 V-Belt: 29" - Cogged, Replacement for 5L290
  • GCI - BX27 V-Belt: 30" - Cogged, Replacement for 5L300
  • GCI - BX29 V-Belt: 32" - Cogged, Replacement for 5L320
  • GCI - BX36 V-Belt: 39" - Cogged, Replacement for 5L390
  • GCI - BX38 V-Belt: 41" - Cogged, Replacement for 5L410
  • GCI - BX44 V-Belt: 47" - Cogged, Replacement for 5L470
  • GCI - GRM8-02-W240 RELAY: Latching & Memory
  • GCI - RLY-DPDT-24VAC RELAY-F 8BLD DPDC 24V AC
  • GCI - RLY-LATCHING RELAY LATCHING MECH
• GTO Gates That Open
  • GTO - R4918 Rev Counter Board (SW3000XLS/4000XLS series)
• HySecurity
  • APO - 1050USR PCB: Refurbished 1050 Board (UL-Compliant)
  • APO - A2017 Gear Spur for 816 Actuator
  • APO - SPAMG206A00 Front Tube Assembly for Titan 912L Arm
  • APO - SPTTN03 Front Seal/Housing for 912L Titan
  • HYS - 10024290 Toggle Switch for Vanguard
  • HYS - 10045790 Insert Collar for 35-1 (3500 ABOX35 Arm) Arm to Output Shaft.
  • HYS - 10070000 Lock Cylinder and Key for Titan
  • HYS - 1125-35 Hardware kit for Vanguard / 3500
  • HYS - 3021-04 COVER, CYLINDER, M30/50 TGIC YELLOW
  • HYS - 5169 Motor Mount, Top, DC
  • HYS - 72510000 Bearing, Flange, 4-Bolt, 1 1/4
  • HYS - BCU1 BCU1 Controller
  • HYS - MX0000366 Washer
  • HYS - MX000044 Harness, Alarm Buzzer and Console Stop
  • HYS - MX000046 Ribbon Cable (ST board to display board)
  • HYS - MX000048 (ESR00068E) Harness, Limit Switch, StrongArm
  • HYS - MX000077 (HCYCY 206 KIT) Cylinder, Arm Gate Kit
  • HYS - MX000079 12 VDC Auxiliary Power Supply board Kit
  • HYS - MX0000812 Lock Washer
  • HYS - MX000091 Inherent Sensor Kit (IES)
  • HYS - MX000100R pump pack refurb for the 14F
  • HYS - MX000137 (HMAMA 222 BVK) Manifold, SlideDriver, Brake Valve Kit
  • HYS - MX000146 (HMAMA 320 KIT) Manifold, Braking Kit, StrongArm 14F, 20, 28
  • HYS - MX000157 (HRSPK 001) Plumbing Kit, Inlet
  • HYS - MX000169 (HSFQD 002 S) Quick Disconnect, Socket
  • HYS - MX000170 Quick Disconnect, Plug (OLD PART# HSFQD 002P)
  • HYS - MX000171 valve, check, endhead main
  • HYS - MX000172 Valve, 2 Position Directional
  • HYS - MX000173 Valve, Quick Stop
  • HYS - MX000174 Relief Valve, 3000 PSI
  • HYS - MX000184 Valve, Coil, Directional, 24VDC (HVASO 040)
  • HYS - MX000185 Valve, Coil, Quick Stop, 24VDC
  • HYS - MX000201 Quick Disconnect, Plug, HydraLift & 444 Only (old part# HSFQD 004 P)
  • HYS - MX000202 Quick Disconnect, Socket, HydraLift & 444 Only (old part# HSFQD 004 S)
  • HYS - MX000222 Valve Cartridge, Manual Bypass
  • HYS - MX000229 valve, check, manifold StrongArm
  • HYS - MX000230 manual bypass valve
  • HYS - MX000233 (HVACK CDAD XBN) Valve, Check (old part# HVACK CDAD XBN)
  • HYS - MX000234 Brake Valve, StrongArm (OLD PART# HVABKCCG LDN)
  • HYS - MX0002427 BOLT FOR BEARINGS SAM
  • HYS - MX000281 Index Arm Kit for SwingRiser
  • HYS - MX000289 Enclosure, 303012, DC Power
  • HYS - MX000296 T-Lock Handle with 2 Keys
  • HYS - MX000299 Limit Cam, StrongArm, Smart Touch (old part# MTBLC 320 ST)
  • HYS - MX000306 (discontinued) Bearing, StrongArm,1.25 Shaft, 4 Bolt (old part# MPTBE 007 4B)
  • HYS - MX000312 Cylinder, Pin, Stainless Steel (old part# HCYPN 016 SS)
  • HYS - MX000346 BATTERY, 3V, LITHIUM
  • HYS - MX000352 Valve, Check, Manifold, SwingRiser
  • HYS - MX000369 DC Power Supply Board DC
  • HYS - MX000386 Drive Arm, Motor Mount, Bottom (MSLDU042B)
  • HYS - MX000387 Drive Arm, Motor Mount, Top
  • HYS - MX000432 Spring, Toggle Assembly (MSLSP 005 2.5)
  • HYS - MX000436 Drive Toggle Yoke for the Slidedriver
  • HYS - MX000455 Cover, Green, Standard SlideDriver
  • HYS - MX000456 Cover, Green, Correctional SlideDriver
  • HYS - MX000457 Cover, Yellow, StrongArm
  • HYS - MX000480 Valve, Relief Valve EX Operators (old part# HVARE LAN)
  • HYS - MX000484 (This Item no longer available) Open Relay, (ESWRE TEL D32)
  • HYS - MX000485 Contactor, Motor, TE (ESWMC TEL 1810)
  • HYS - MX000486 Transformer: 24VAC, 75 VA, Hardwired, Multi-Tap
  • HYS - MX000487 Power Supply Board AC
  • HYS - MX000496 Chassis, 222, SlideDriver
  • HYS - MX000497 Chassis for StrongArm (Yellow)
  • HYS - MX000531 Cover Plate, Limit Switch, SwingRiser
  • HYS - MX000542 Pin, lower Cylinder (SwingRiser)
  • HYS - MX000566 Counterweight, StrongArm HTG, Gold
  • HYS - MX000567 Limit Cam, 1 1/4 B Type, StrongArm, Relay (old part# MTBLC 320 B)
  • HYS - MX000579 Bearings for Strong Arm
  • HYS - MX000585-0 PCB: Smart Touch Control Board
  • HYS - MX000591 (Index arm mount bracket)
  • HYS - MX000601 Cylinder, Mount, Anchor, 1 Inch, Kit
  • HYS - MX000608 Slowdown Limit Switch Assembly
  • HYS - MX000613 Motor & Mercury SW Mounting Plate
  • HYS - MX000618 AWOG, Face down hose assembly
  • HYS - MX000641 Counterweight mount left side StrongArm
  • HYS - MX000642 Counterweight mount right side StrongArm
  • HYS - MX000657 Valve, Brake Valve, SlideDriver And HydraLift
  • HYS - MX000658 (HVARE FAN) Valve, Relief Valve
  • HYS - MX000659 Relief valve for soft start operators
  • HYS - MX000672 Limit Switch, SlideDriver
  • HYS - MX000681 HHCS,1/4-20x3/4,S/S
  • HYS - MX000686 Breather Cap (old part# HRSBC 001)
  • HYS - MX000691 Carbon brushes (4) and spring for 2 HP Scott DC motor
  • HYS - MX000706 Washer,Flat,1/4,SAE,S/S
  • HYS - MX000715 Switch, Power Disconnect (old part# ESWDI 050 3P)
  • HYS - MX000719 Harness; Wiring, Inherent Sensor
  • HYS - MX000742 26' Alum/Fiberglass Arm for barrier
  • HYS - MX000743 Barrier Arm, Fiberglass, 28 ft. Replacement.
  • HYS - MX000747 36' Alum/Fiberglass Replacement Barrier Arm
  • HYS - MX000768 HySecurity 1"shaft retaining ring
  • HYS - MX000772 Chain, #35, HydraLift Limit Switch (old part# MPTRC 035)
  • HYS - MX000773 Chain: Master Link, #35 (old part# MPTRC 035 CON)
  • HYS - MX000778 Limit Switch, HydraLift (old part# ESWLS 228 VG)
  • HYS - MX000801 PIN FOR SPRING TOGGLE
  • HYS - MX000814 Drive Rail Roll Pin (2 req per splice)
  • HYS - MX000837 Cable Assy, Motor to Control
  • HYS - MX000842 Circuit Breaker, DC 60 Amp (old part# ESWCB 030 060)
  • HYS - MX000843 Circuit Breaker, DC 120 Amp (old part# ESWWCB 030 120)
  • HYS - MX000847 Sheave, Cable Pulley, HydraLift (old part# MVLSV 001 5.0)
  • HYS - MX000864 Fuse, 5 Amp (old part# ESWFU 010 05)
  • HYS - MX000866 Limit Switch (SwingRiser)
  • HYS - MX000910 (EACHE 120 250W) Heater, 120 Volt (Strip Only)
  • HYS - MX000911 (EACHE 240 250W) Heater, 240 Volt (Strip Only)
  • HYS - MX000912 (EACH(E 480 250W) Heater, 480 Volt (Strip Only)
  • HYS - MX000917 Bearing, Bogie, HydraLift (old part# MPTBE 020)
  • HYS - MX000939 Chain: Master Link, #50, HydraLift 20 (old part# MPTRC 050 CON)
  • HYS - MX000967 (ESWLS224) Limit Switch, SlideDriver (without cable)
  • HYS - MX000968 Limit Ramp Kit, SlideDriver, (Stop Ramp)
  • HYS - MX000970 Hydraulic Oil (1 Gallon)
  • HYS - MX000971 Seal Kit, Pump, Fenner (old part# HASSE 01H)
  • HYS - MX000973 Valve, Coil, Directional, 24VAC (old part# HVASO DEL 024)
  • HYS - MX000988 Crimped Stake-On Wire 14Awg 13" long
  • HYS - MX000997 Beacon, Strobe, Amber 24 VDC
  • HYS - MX001001 Replacement Barrier Arm Section, Aluminum, 10ft (old part# AMITB R10 A)
  • HYS - MX001002 Replacement Barrier Arm Section, Aluminum, 12ft (old part# AMITB R12 A)
  • HYS - MX001003 Replacement Barrier Arm Section, Aluminum, 14ft (old part# AMITB R14 A)
  • HYS - MX001004 Replacement Barrier Arm Section, Aluminum, 16ft (old part# AMITB R16 A)
  • HYS - MX001005 Replacement Barrier Arm Section, Aluminum, 18ft
  • HYS - MX001006 Replacement Barrier Arm Section, Aluminum, 20ft (old part# AMITB R20 A)
  • HYS - MX001007 Replacement Barrier Arm Section, Aluminum, 22ft (old part# AMITB R22 A)
  • HYS - MX001008 Replacement Barrier Arm Section, Aluminum, 24ft (old part# AMITB R24 A)
  • HYS - MX001015 Replacement Barrier Arm Section, Wood, 10ft (old part# AMITB R10 W)
  • HYS - MX001016 Replacement Barrier Arm Section, Wood, 12ft (old part# AMITB R12 W)
  • HYS - MX001017 Replacement Barrier Arm Section, Wood, 14ft (old part# AMITB R14 W)
  • HYS - MX001019 Heater Kit, 120V, (Field-Installed)
  • HYS - MX001020 Heater Kit, 240V, (Field-Installed)
  • HYS - MX001021 Heater kit, 480V, (Field-Installed)
  • HYS - MX001022 Heater kit, 575V, (Field-Installed)
  • HYS - MX001026 (AMKSL 0LS) Drive Wheel Release Indicator Switch
  • HYS - MX001034 T-Lock, Kit (Field installed)
  • HYS - MX001036 Alarm Buzzer (Smart Touch, Smart DC)
  • HYS - MX001037 Replacement Barrier Arm Section, Fiberglass, 8ft
  • HYS - MX001038 Replacement Barrier Arm Section, Fiberglass, 10ft
  • HYS - MX001039 Replacement Barrier Arm Section, Fiberglass, 12ft
  • HYS - MX001040 Replacement Barrier Arm Section, Fiberglass, 14ft
  • HYS - MX001041 Replacement Barrier Arm Section, Fiberglass, 16ft
  • HYS - MX001043 (AMITB 00F SIDE) Barrier Arm, Bracket and Clamps, Fiberglass
  • HYS - MX001044 (AMITB 00W SIDE) Barrier Arm, Bracket and Clamps, Wood
  • HYS - MX001046 Barrier Arm, Bracket and Yoke, Counterweight Type (old part# AMITB 00A YOKE)
  • HYS - MX001047 Barrier Arm Bracket and Yoke, Non Counterweight Type (old part# AMITB 00Y YOKE)
  • HYS - MX001087 Bearing, StrongArm,1.25 Shaft, 2 Bolt
  • HYS - MX001089 Bolt, 3/8" Button Head, Nickel Plated
  • HYS - MX001090 (AMITB 00A SIDE) Barrier Arm, Bracket and Clamps, Aluminum
  • HYS - MX001092 Capacitor, Motor, .75HP, 1HP, 2HP
  • HYS - MX001093 Capacitor, Motor, Older, 1HP & 2HP
  • HYS - MX001096 Circuit Breaker, DC 150 Amp
  • HYS - MX001098 Contactor, Mercury
  • HYS - MX001100 Crank Shaft,keys, Crank Bearing & Zerk (old part# MTBCS 320 K)
  • HYS - MX001101 Cylinder Kit, Long Hoses (SwingRiser)
  • HYS - MX001103 Drive Unit, cast toggle release clamp kit
  • HYS - MX001104 Drive Unit, Motor Mount, Universal Top & Bottom
  • HYS - MX001105 Drive Arm Pivot Pin Kit
  • HYS - MX001106 Gauge, Pressure, SlideDriver
  • HYS - MX001107 Pressure gauge, SwingRiser, HydraLift
  • HYS - MX001109 Heater kit, 120V, (Field-Installed)
  • HYS - MX001110 Heater kit, 240V, (Field-Installed)
  • HYS - MX001111 Heater kit, 480V, (Field-Installed)
  • HYS - MX001112 Heater kit, 575V, (Field-Installed)
  • HYS - MX001113 Hose, HydraLift Operators
  • HYS - MX001114 SW Hose, SwingRiser Operators
  • HYS - MX001118 Limit Switch, Open, StrongArm (old part# ESWLS 241 TBD)
  • HYS - MX001119 Lock, 320 Covers, Kit
  • HYS - MX001120 Spare Key for T-Lock Assembly (1)
  • HYS - MX001121 Manifold, HydraLift, Braking Kit
  • HYS - MX001127 Manifold, SwingRiser, 220 Kit
  • HYS - MX001128 Manifold, SwingRiser, 222 Kit
  • HYS - MX001129 Hose Kit, SlideDriver, 1/4" hoses
  • HYS - MX001132 Hose Fittings Kit, 1/4 inch, Single
  • HYS - MX001135 Hose Fittings Kit, 1/4 inch, Twin
  • HYS - MX001142 Motor: Hydraulic, RS-12", (Older Models)
  • HYS - MX001143 Motor: Hydraulic, RS-24", (X1, 444)
  • HYS - MX001168 Lock Plate Kit for 1010 Deadbolt
  • HYS - MX001169 Lock Plate Kit for Padlock
  • HYS - MX001170 Lock Plate Kit and T-Lock
  • HYS - MX001185 Cable ASSY, SA/HS, DC Motor
  • HYS - MX001193 Heater kit, 480V, (Field-Installed)
  • HYS - MX001197 Lights for Flashing Light Kits
  • HYS - MX001198 Limit Switch, Long, Relay machine only (OLD PART# ESWLS224 LONG)
  • HYS - MX001213 Release, Key Operated, Kit
  • HYS - MX001214 (AMKLR 001 R) Release, Remote, Air Operated (uninstalled Kit)
  • HYS - MX001215 Drive Unit, Cast Arm Upgrade, Kit
  • HYS - MX001216 Reset Button (External)
  • HYS - MX001220 Shaft Kit, 1" Roller Upgrade (SwingRiser)
  • HYS - MX001221 Shaft Kit, 1" Roller (SwingRiser)
  • HYS - MX001223 Snow Brushes
  • HYS - MX001225 Solenoid: Deadbolt lock Kit, 120VAC
  • HYS - MX001226 Solenoid: Deadbolt lock kit, 208VAC
  • HYS - MX001227 Solenoid: Deadbolt lock kit, 240VAC
  • HYS - MX001228 Solenoid: Deadbolt lock kit, 480VAC
  • HYS - MX001229 Snow Scrapers (AMKSS 001)
  • HYS - MX001232 Flasher 1-10 Seconds 120/240 V
  • HYS - MX001236 (MVCBL 001 KIT) Stabilization Cable Kit 4", HydraLift
  • HYS - MX001237 Stabilizer Kit
  • HYS - MX001245 Timer, Maximum Run 24 VAC
  • HYS - MX001246 (This Item no longer available) Timer, Pneu, TEL, Delay OFF, 1-3 sec.
  • HYS - MX001252 Valve, 3 Position
  • HYS - MX001257 Valve, Directional with Manual Knob
  • HYS - MX001258 Valve, Flow Control, SwingRiser
  • HYS - MX001270 (ECOTS 005) Terminal Strip 5 Pole 20 amp
  • HYS - MX001276 AWOG, Soft-Start Kit (Face Down)
  • HYS - MX001306 Hand Pump (Swing Riser)
  • HYS - MX001318 Touch up paint, green
  • HYS - MX001319 Touch up paint yellow
  • HYS - MX001328 Hose, Remote Release SlideDriver
  • HYS - MX001346 Lower Sprocket Kit Hydralift 10
  • HYS - MX001348 Upper Sprocket Kit Hydralift 10/10F
  • HYS - MX001373 Adjustment Assy. Index Arm
  • HYS - MX001393 Plastic Cover for Circuit Board
  • HYS - MX001395 Motor: DC SwingSmart
  • HYS - MX001403 Pulley: Motor, 24 T, Smart DC
  • HYS - MX001404 Pulley: Gearbox, 36T SwingSmart DC20
  • HYS - MX001574 Fittings, 333 Hose
  • HYS - MX001634 Motor: Electric, 60 HZ, 3/4 HP, 3 phase 3450 RPM
  • HYS - MX001635 Motor, Electric, 1 HP, 1 Phase, 60 HZ, 3450 RPM
  • HYS - MX001635R Motor: Electric, 60Hz, 1.0 HP, 1 Phase, 3450 RPM, Reconditioned
  • HYS - MX001636 Motor: Electric 1.0 HP-3 Phase, 60 HZ
  • HYS - MX001637 Motor: Electric, 2.0 HP-1 Phase, 60 HZ
  • HYS - MX001637R Motor: 60hz, 2 HP, 1PH. Reconditioned
  • HYS - MX001638 Motor: Electric 2.0 HP-3 Phase, 60 HZ
  • HYS - MX001639 Motor, Electric, 60Hz, 5.0 HP, 3P, 3450 RPM, 208/230/460VAC
  • HYS - MX001640 Motor: Baldor 1.0 HP-1 Phase, 60 HZ
  • HYS - MX001641 Motor: Electric, 1.0 HP-3 Phase, 60 HZ, 1725 RPM
  • HYS - MX001646 Motor Assy, 3/4HP, 24 VDC, 1800RPM (HTG Operators)
  • HYS - MX001647 Motor: Electric, 24 VDC, 2.0 HP
  • HYS - MX001650 Motor Coupler, 9T, 5/8 in Shaft (Kit)
  • HYS - MX001656 Chassis, SwingSmart
  • HYS - MX001658 Top Bracket for limit assembly and cover mount.
  • HYS - MX001667 Motor Kit, 60HZ, 575, 3PH, 1HP 3450
  • HYS - MX001694 Bronze Bushing 1/2 ID x .62 OD
  • HYS - MX001695 Rod End, Ball Joint, Male
  • HYS - MX001703 Knob for Top Cap
  • HYS - MX001718 Bearing and Shim Kit, Upper & Lower (SwingRiser)
  • HYS - MX001730 AWOG Conversion Kit, Face Up to Face Down
  • HYS - MX001743 Clamp Assembly, Taper, SwingSmart
  • HYS - MX001744 Belt: Drive, SwingSmart (95T)
  • HYS - MX001745 Limit Plate and Blocks Assembly
  • HYS - MX001746 Cover, Top Cap for SwingSmart
  • HYS - MX001753 Harness, Limit Switches SM
  • HYS - MX001757 Harness: Smart DC, Motor-Battery-Upper Switch
  • HYS - MX001759 Harness Kit, AC Power CB, SM
  • HYS - MX001760 Circuit Breaker, 15 Amp
  • HYS - MX001761 Power Switch, Smart DC
  • HYS - MX001766 PCB: Board, Power supply, 115/230VAC
  • HYS - MX001777 Switch, Limit, Smart DC
  • HYS - MX001815 Covers, Arm Pinch Protection
  • HYS - MX001872 Limit switch kit, StrongArm, ST (Pre-03/01/09)
  • HYS - MX001875 Heater Thermostat
  • HYS - MX001884 Outlet, Convenience, 115VAC, 3 PRG
  • HYS - MX001885 Wire: Blue, 12 inch, w/terminals, SlideSmart Ext BBU
  • HYS - MX001887 Seal Kit, Braking Manifold
  • HYS - MX001888 Wire: Red, 26 inch, w/terminals, SlideSmart Ext BBU
  • HYS - MX001889 Wire: Black, 17 inch, w/terminals, SlideSmart Ext BBU
  • HYS - MX001890 Wire: Red, Fuse to Solar Panel, Smart DC, Gen 1
  • HYS - MX001891 Wire: Orange, Joining, Smart DC, Gen 1
  • HYS - MX001892 Wire Harness: Solar Power Input, Smart DC Gen 1
  • HYS - MX001910 Motor: Electric .75 HP-1 Phase, 60 HZ
  • HYS - MX001911 Motor: Electric, 1 HP, 1 Phase, 60 HZ, 3450 RPM
  • HYS - MX001912 Motor: 2HP,1PH, 208/230VAC
  • HYS - MX001920 Motor Brush Kit, Smart DC
  • HYS - MX001921 (This Item no longer available) Soft Stop Timer & Relay kit
  • HYS - MX001926 Cover, 3-Piece, SwingSmart
  • HYS - MX001928 Wheel Hub, SlideDriver
  • HYS - MX001933 Swingsmart, Handle, Clamp, Replacement Kit
  • HYS - MX001937 Spare Keys, SwingSmart (set of 2)
  • HYS - MX001943 Pump pack, SlideDriver 15 (222SS and 222DS)
  • HYS - MX001944 Pump Pack, SlideDriver 40 (222E)
  • HYS - MX001952 PUMP PACK 1.6 GPM
  • HYS - MX001954 Pump Pack For StrongArm 36
  • HYS - MX001959 Pump Pack, SwingRiser 14
  • HYS - MX001960 Pump Pack, SwingRiser 19
  • HYS - MX001961 Pump Pack, SwingRiser 30
  • HYS - MX001965 Pump Pack, SwingRiser 14 Twin
  • HYS - MX001966 Pump Pack, SwingRiser 19 Twin
  • HYS - MX001977 Pump Pack, SlideDriver 50VF2/3 (X3) Pre-2017 models
  • HYS - MX001979 Pump Pack, SlideDriver 30F/40F
  • HYS - MX001981 Pump Pack, SlideDriver 200
  • HYS - MX001987 Loctite 545 Thread Sealer
  • HYS - MX001995 Motor: DC SlideSmart
  • HYS - MX002005 Gearbox for SwingSmart
  • HYS - MX002006 Limit Switch Kit, SwingSmart
  • HYS - MX002008 Battery: Set of 2: 12 volt, 8 Ah (UB1280)
  • HYS - MX002011 Arm Assembly, Articulating (SwingSmart)
  • HYS - MX002012 Warning sign kit (old part# MX000882)
  • HYS - MX002054 Motor Coupler, 6T, 5/8" Shaft (Kit)
  • HYS - MX002057 Bearing Shim Kit, Shims only (SwingRiser)
  • HYS - MX002076 Pulley Gearbox 60T
  • HYS - MX002085 Target Sensor, SlideSmart
  • HYS - MX002087 (discontinued) Target Magnet, SlideSmart
  • HYS - MX002106 Belt: Drive, SlideSmart 15 (100T)
  • HYS - MX002107 Belt: 90T Drive Belt, SlideSmart 10 (90T)
  • HYS - MX002109 Harness, Transformer Extend
  • HYS - MX002114 USB Download Cable Smart DC
  • HYS - MX002115 Cover, 2 Piece, for SlideSmart
  • HYS - MX002136 Spare Keys, SlideSmart (set of 2)
  • HYS - MX002181 Idler Wheel Kit, SlideSmart
  • HYS - MX002210 Gearbox for SlideSmart DC
  • HYS - MX002211 Sprocket: for SlideSmart, #40 roller chain.
  • HYS - MX002214 Chain bolt attachment kit for the slidesmart
  • HYS - MX002219 Cylinder, Position Sensing, 2.5"x14" for StrongArm M30/M50
  • HYS - MX002227 Alarm Buzzer (StrongArm HTG)
  • HYS - MX002281 ARM HINGE SAM
  • HYS - MX002295 Bumper, Pivot Post
  • HYS - MX002328 CLAMP ASSEMBLY FOR M50 LOWER ARM
  • HYS - MX002364 Bracket, Physical Stop, for DC Park
  • HYS - MX002381 Pin, Cylinder, Upper for the M30/M50
  • HYS - MX002382 Pin, Cylinder, Lower for the M30/M50
  • HYS - MX002385 M30: Collar 2.25" Shaft M30 Arm
  • HYS - MX002390 Assembly, Spring Assist, SAP
  • HYS - MX002413 Cable, Modbus, 22 Inch
  • HYS - MX002430 Carriage Bolt, 1/4-20+20x2-1/2,S/S
  • HYS - MX002434 Pin, Lower Catch SAM
  • HYS - MX002440 Encoder board, (HydraSwing)
  • HYS - MX002467 Eyebolt, Nut and Nord-Lock, Cylinder Anchor
  • HYS - MX002539 RETAINER, SEAL HINGE, SAM3
  • HYS - MX002555 Replacement core for lock kit, M30/M50 Cover
  • HYS - MX002573 Motor: w/Sensor, 24VDC, 750W, 1HP for SlideSmart HD 30
  • HYS - MX002588 Bearing: Poly, 1.25" x 1.5"
  • HYS - MX002605 Cylinder Assembly, Position Sensor for StrongArm Crash
  • HYS - MX002610 GASKET, PIVOT, SAM30
  • HYS - MX002652 Bracket: Arm Bracket, Only for 1" x 4" Wood Arm
  • HYS - MX002655 LATCH, KEY LOCK, SOUTHCO, SMARTARM
  • HYS - MX002707 Drive Wheel: Kit, 6 in AdvanceDrive
  • HYS - MX002708 Bumper, Close, SC
  • HYS - MX002723 Linkage Assembly, Lower Arm M50
  • HYS - MX002747 Guard, Open Bumper
  • HYS - MX002798 Transformer: for Swing/Slide Smart
  • HYS - MX002821 HAND PUMP,M30,REPLACEMENT,KIT
  • HYS - MX002834 Catch Post Entrapment Shield Including Hardware
  • HYS - MX002859 Chain Kit HVG 420/420 EX
  • HYS - MX002873 Cam Lock and Key for SlideSmart
  • HYS - MX002874 Lock, Latch w/key for SwingSmart Clamshell Cover
  • HYS - MX002895 Relay, 90-280VDC, Solid State
  • HYS - MX2387-14 Strap Lower M30 Arm, 14'
  • HYS - MX2387-16 Strap, Lower M30 Arm, 16'
  • HYS - MX2387-18 Strap, Lower M30 Arm, 18'
  • HYS - MX2387-22 Strap, Lower M30 Arm, 22'
  • HYS - MX2387-24 Strap, Lower M30 Arm, 24'
  • HYS - MX2397-14 Arm Assembly, Lower, M30, 14'
  • HYS - MX2397-16 Lower Arm Replacement Assembly, 16 ft. clear opening
  • HYS - MX2397-18 Arm Assembly, Lower 18 ft.
  • HYS - MX2397-20 Arm Replacement Assembly, Lower
  • HYS - MX2397-22 Arm, Assy, Lower, 22'
  • HYS - MX2397-22 Arm Replacement Assembly, Lower, 22'
  • HYS - MX2397-24 Arm Assembly, Lower, 24'
  • HYS - MX2603-16 Arm, Upper Assembly, M30, 16'
  • HYS - MX2715-08 Lights for StrongArmPark, 1/2" Dia, 8ft. RED, 12v
  • HYS - MX2715-14 Lights for StrongArmPark, 1/2" Dia, 14ft. RED, 14v
  • HYS - MX2890-01 Retrofit HyCharger DC Battery Charger 208/230VAC
  • HYS - MX2890-02 Retrofit HyCharger DC Battery Charger 115VAC
  • HYS - MX2914-01 HyCharger DC, Battery Charger 240 VAC
  • HYS - MX2914-02 Charger, Battery 208/ 240 V
  • HYS - MX2918-01 HyCharger DC, Battery Charger 120 VAC
  • HYS - MX3013 Bracket, StrongArm Park SAP Mount Base
  • HYS - MX3019 PIVOT PIN FOR UPPER ARM - SAM
  • HYS - MX3024 CAP, ARM, PIVOT, SAM
  • HYS - MX3029-14 Arm, Upper Assy, 14' M50
  • HYS - MX3029-16 Arm, Upper Assy, 16' M50
  • HYS - MX3029-22 Arm, Upper Assy, 22' M50
  • HYS - MX3037-0 PCB: Smart DC Board, MKII
  • HYS - MX3039 Key: Spare key for StrongArm M30/M50 (key and cam)
  • HYS - MX3043 Limit Ramp Kit, SlideDriver 50VF, (Slow Down)
  • HYS - MX3053 BRACKET, ARTIC.ARM, TO CHASSIS
  • HYS - MX3056 Mount, Gate Swing Cylinder for HydraSwing.
  • HYS - MX3103 Bumper Replacement Kit, Stop
  • HYS - MX3104 Nylon Bolts & Nuts (HyProtect)
  • HYS - MX3121-03 Encoder Cable, (HydraSwing)
  • HYS - MX3125 Cover, Top, StrongArm Park
  • HYS - MX3126 Cover, Breakaway Bracket
  • HYS - MX3132 Drive Wheel: Kit, 8 in AdvanceDrive
  • HYS - MX3140-20 Arm, Upper w/3 straps, M50, 20'
  • HYS - MX3140-22 Arm, Upper w/3 straps, M50, 22'
  • HYS - MX3140-24 Arm, Upper w/3 straps, M50, 24'
  • HYS - MX3141-13 Arm, Upper w/2 straps, M30, 13'
  • HYS - MX3141-16 Arm, Upper w/2 straps, M30, 16'
  • HYS - MX3141-18 Arm, Upper w/2 straps, M30, 18'
  • HYS - MX3141-20 Arm, Upper w/2 straps, M30, 20'
  • HYS - MX3141-24 Arm, Upper w/2 straps, M30, 24'
  • HYS - MX3142 Saddle, Assy Hardware M30-50
  • HYS - MX3217 Harness, Wiring, LED Lights
  • HYS - MX3219 Target Sensor for Arm (StrongArm Park)
  • HYS - MX3231 Mount, Gate Bracket (HydraSwing)
  • HYS - MX3267 Counterweight, StrongArm HTG, GALV, 18x10x0.5
  • HYS - MX3270 GEARBOX WITL OIL, SAP
  • HYS - MX3290-03 LINKAGE, ARTIC.ARM, 7' CLEAR
  • HYS - MX3299 Lever, Physical Stop, Assembly
  • HYS - MX3356 Display Board (New style OLED)
  • HYS - MX3399 Smart Touch Keypad (New style OLED)
  • HYS - MX3402 START SWITCH, CV40 -12, 1-2HP, 60Hz
  • HYS - MX3484-14 Lights, Flex Circuit, 14 Ft.
  • HYS - MX3486 Flow Divider, HydraSwing 40 Twin
  • HYS - MX3506-01 COVER, ASSY, W/FAN, YELLOW, M30/M50
  • HYS - MX3524 Pump Pack, HydraSwing 40 Twin
  • HYS - MX3536 Spacer, WedgeSmart Chassis
  • HYS - MX3542 OLED Display Retrofit Assembly Kit
  • HYS - MX3543 Pulley, Motor, 24T, 15 mm 24T
  • HYS - MX3544 Belt: Gearmotor to Gearbox Drive Belt 82T, 15mm.
  • HYS - MX3545 Hose Kit, HydraSwing 40/40F
  • HYS - MX3546 Cylinder Kit, for the HydraSwing 40/40F/40 Twin primary
  • HYS - MX3548 Hydraulic Cylinder with fittings for HydraSwing 80F/150
  • HYS - MX3555 Plastic Cap for Smart DC Alum Barrier Arms
  • HYS - MX3557 Bracket: Aluminum, Arm Mount
  • HYS - MX3558 Flexible Wire Harness For LED Arm Lights
  • HYS - MX3585 Gearmotor, 24VDC w/Hall Sensor for StrongArmPark DC
  • HYS - MX3621 Belt and Pulley, Kit, 15mm
  • HYS - MX3680 Breakaway Arm Bracket, SAP (No Kill Sw)
  • HYS - MX3683 Pump Pack, 4.0 GPM, Biodegradable, M30/50, 12-18 ft.
  • HYS - MX3796 Circuit Breaker, 5 amp, AC machines only
  • HYS - MX3802 Quick Disconnect reducer fitting
  • HYS - MX3827 Breakaway Arm Bracket, HTG (w/Kill Switch Kit)
  • HYS - MX4000 Articulating arm for SwingSmart
  • HYS - MX4005 Arm Assembly, Universal, Next Gen, SwingSmart
  • HYS - MX4050 Breakaway Arm Bracket, SAP (w/Kill Sw Kit)
  • HYS - MX4104 Latch Lock w/Key for StrongArm Park DC
  • HYS - MX4138 Download Cable, Smart Touch, S.T.A.R.T
  • HYS - MX4187 Pump Pack, SlideDriver 80
  • HYS - MX4191 Pump Pack, SlideDriver 50VF2/3 (X3) Post June-2017 models
  • HYS - MX4210 VFD, Modbus, 208-230VAC, 50/60 Hz, 1 and 3 Phase
  • HYS - MX4211 VFD, Modbus, 380-460VAC, 50/60 Hs, 3 Phase
  • HYS - MX4225-10 Light kit, 10 ft Flexible Red LED
  • HYS - MX4225-12 Light kit, 12 ft Flexible Red LED
  • HYS - MX4225-14 Light kit, 14 ft Flexible Red LED
  • HYS - MX4238 Arm, Rod End, Swivel
  • HYS - MX4280 Idler Assembly, CNX
  • HYS - MX4289 Hose Kit, SlideDriver, 3/8" hoses
  • HYS - MX4329-02 Target Sensor, Long
  • HYS - MX4329-03 Target Sensor w/Harness for CNX Swing
  • HYS - MX4354 Plate Idler Mount
  • HYS - MX4366 Rodent block plate for SlideSmart DC 10F &15 models.
  • HYS - MX4402 Kill Switch, Mag Fastener Kit
  • HYS - MX4409 Power Supply, CNX
  • HYS - MX4410 Assembly, Expansion, CNX
  • HYS - MX4430 Target Magnet, SlideSmart and SlideSmart CNX
  • HYS - MX4465 Cover, Front Assembly, SlideSmart CNX
  • HYS - MX4470 Cover, Rear Assembly, SlideSmart CNX
  • HYS - MX4535 Arm, Universal, Service Kit
  • HYS - MX4549 Bracket: Chain Bracket, Bolt-On, 2" Square Tubing, CNX
  • HYS - MX4617 Motor: 24VDC, 2000 RPM for SlideSmart CNX
  • HYS - MX4624 Gearbox, SwingSmart w/Oil
  • HYS - MX4625 Gear Box for SlideSmart CNX
  • HYS - MX4655 Splitter, DC Power, LED Lights, M30/M50
  • HYS - MX4660 Power Supply, 240W, Single Output for M30 & M50
  • HYS - MX4752 Motor: Hydraulic, RS-10, Standard (New version)
  • HYS - MX4774 Cover: F/3500, Blk Plastic
  • HYS - MX4847 Idler Wheel Kit, SlideSmart HD, (integrated ball bearing)
  • HYS - MX4920 Mercury 310 Controller
  • HYS - MX5013 Software upgrade Kit, SmartCNX, USB drive
  • HYS - MX5026 Limit Sensor Bracket, SlideDriver II
  • HYS - MX5027 Limit Sensor, SlideDriver II, Sensor only
  • HYS - MX5168 Motor Mount, Bottom, DC
  • HYS - MX5184 Controller board Replacement Kit for CNX operators
  • HYS - MX5185 Motor Drive Module Replacement Kit for CNX Operators
  • HYS - MX5196 Bracket Kit for Mercury 310
  • HYS - MX5223 Drive Wheel: 8" AdvanceDrive, Replacement wheel only
  • HYS - MX5491 Limit Flag Kit (Long Pair), SlideDriver II 50F
  • HYS - MX5492 Limit Flag Kit (Short Pair), SlideDriver II 15, 40, 80, 200
  • HYS - MX5493 Limit Sensor Kit, SlideDriver II, includes bracket
  • HYS - MX5494 VFD, 2HP, 200-240VAC, 1Ø, SD50F and SD80V
  • HYS - MX5495 VFD, 2HP, 200-240VAC, 3Ø, SD50F and SD80V
  • HYS - MX5496 VFD, 2HP, 400-480VAC 3Ø, SD50F and SD80V
  • HYS - MX5552 720 PCB: Smart Touch Control Board -SDII (NO Ext Comm)
  • HYS - MX5572 Limit Flag Spacer, SlideDriver II
  • HYS - MX5578 SlideDriver Quick disconnect Kit, SD, 1/4" QD
  • HYS - MX5626 725 PCB: Smart Touch Control Board -SDII
  • HYS - SA-7-01 Alarm Buzzer (Pre-Installed Option)
  • HYS - SPMTG03100 Motor Group for M3Bar
  • HYS - SwingRiser Replacement Post Post assembly only, Inner and outer with hydraulics
  • HYS - WA11 Anchor Mount Stand for MBAR
• Interstate Batteries of Sacramento
  • INT - SLA1105 Battery: 12V, 12 Ah, Gel Cell
• LiftMaster (Chamberlain Group)
  • DCS - K-127A0110B 5.35 Firmware chip for Mega Arm
  • DCS - K-127A0112B chip for the mega swing/slide board
  • DCS - MA001 K79-60166 PCB: Circuit Board DC Solutions Mega Arm operator
  • DCS - MA003 Motor: 24V, High Torque, 1/2HP
  • DCS - MA003B Motor Brushes for Dc Mega Swing
  • DCS - MA003E Brushes F-Series"E" Motor for Dc Mega Swing
  • DCS - MA005 Mega Arm Gear Reducer 60:1
  • DCS - MA008 Gear Reducer Pulley - 8"
  • DCS - MA009 Motor Pulley
  • DCS - MA010 Mega Arm Gate Arm Bracket
  • DCS - MA011 Magnet
  • DCS - MA012 Cam Arm and Magnet
  • DCS - MA013 Shear Pin (size #6)
  • DCS - MA0137 Shear Pin #7
  • DCS - MA020 Mega Arm Cover
  • DCS - MA020T Mega Arm Tower Lid
  • DCS - MA021 Nylon Arm Nuts: Pkg of 50
  • DCS - MA031 Adaptor Collars: For padded arm option (2-included)
  • DCS - MA040-3 Arm End Cap, 3" - 2 pack
  • DCS - MA041 Key HL300 for megatower
  • DCS - MAS001 MAS & MAST CIRCUIT BOARD
  • DCS - MS001 (K79-60142) Mega Slide / Swing Control Board
  • ELI - 08-50850 End cap caster for SL-3000 with Intelock Assy.
  • ELI - 19-40240D Chain Size #40 Length 10'
  • ELI - 19-41240D Chain: Size #41 Length 10'
  • ELI - 19-41240D-NP Chain: Nickel Plated Size #41 Length 10'
  • ELI - ACCESSDOOR ACCESS DOOR FOR CSW
  • ELI - APOW3 Transformer: 34VDC, 1.17A, Plug-In
  • ELI - DC Controller (Controller and battery pack only for DC1000)
  • ELI - DC2000 Battery Backup Controller ONLY (DC2000)
  • ELI - K127A0070 MIRACLE TWO UPGRADE CHIP 8.0
  • ELI - K23-51142 Reset switch with connector for CSW
  • ELI - K32-34701-2 Gear reducer: RSL12V
  • ELI - K32-35618 Gear Reducer: RSW12V, (30:1, #40)
  • ELI - K32-36513-1 Gear reducer: RSW12U (30:1)
  • ELI - K45-50676 Star knob/bolt for CSW/Robo clutch cover
  • ELI - K75-50261 (Q269) Cover: for Elite CSW, SS
  • ELI - K75-50893 Safety Interlock Assy for SL-3000.
  • ELI - K76-51230 Solenoid: Brake for SL-3000E
  • ELI - K77-50336 (Q232) Bottom Washer and Nut (LA500 travel carriage bolt)
  • ELI - K94-35225 Battery harness for RSW/RSL
  • ELI - OMNIUP PCB: Omni board upgrade kit (firmware REV 1.7)
  • ELI - Q003 (K07-50637) Chain Adj Bolt
  • ELI - Q006 (K80-50044) PCB: Circuit Board Nuts (set) (SL-3000, CSW-200, Miracle, ROBO SW/SL)
  • ELI - Q013 (K75-50090) Idler Wheel (Slide Operator)
  • ELI - Q014 (K15-41B26LGH) Sprocket: Drive Sprocket SL-3000
  • ELI - Q015 (K32-50091) Gear Reducer: SL3000, (30:1)
  • ELI - Q016 (K15-35B17LGF) Lower Limit Drive Sprocket
  • ELI - Q018 (K20-1050B-1RL) Motor: 1/2 HP 120V (SL3000/CSW200)
  • ELI - Q020 (K16-50094) V-Belt: 4L220, AX20 (SL-3000 1/2HP)
  • ELI - Q021 (K17-50095) Gear Pulley ID3/4 (SL-3000)
  • ELI - Q024 (K75-50097) Limit Switch Box (SL-3000)
  • ELI - Q025 (K17-50098) MOTOR PULLEY (CSW-200, SL-3000)
  • ELI - Q027 (K29C-65AU2415) Motor Capacitor (SL-3000, CSW-200)
  • ELI - Q029 (K23-50099) Limit Switch (All Elite models)
  • ELI - Q032 (K75-50101) Limit Adjustment Nut (Slide Operator)
  • ELI - Q042 (K16-50108) V-Belt: 4L300, AX28 (CSW-200 DM w/BBU)
  • ELI - Q043 (K09-50109) Chassis, CSW200, (1st Gen #60 Gear Reducer)
  • ELI - Q044 (K19-50048) Chain Kit: #50, Gear Reducer CSW200
  • ELI - Q045 (K16-50110) V-Belt: 4L190, AX17 (CSW-200 1/2HP)
  • ELI - Q046(K17-50223) Pulley: Gear Reducer
  • ELI - Q050(K32-50112) Gearbox (spline output shaft)
  • ELI - Q057 (K75-50117) Sprocket and chain kit, CSW & Robo
  • ELI - Q058(K07-50118) Output Shaft for size 60 Gearbox
  • ELI - Q059 (K09-50119) Output Arm, T-Bar, Solid CSW/ Robo SW
  • ELI - Q060 (K75-50120) Release Handle for CSW and RSW series operators
  • ELI - Q061 (K75-50121) Output Cludge Assembly
  • ELI - Q062 (K09-50122) Clutch Cover, Stainless Steel
  • ELI - Q069 (K07-50126) Coupler for pre-hercules motor to gear box
  • ELI - Q070 Sprocket: Drive Sprocket
  • ELI - Q071 (K32-50127) Gear Box: HERCULES 40/1 GEAR BX
  • ELI - Q074 (K75-50130) Coupler for hercules
  • ELI - Q076 Turn buckle
  • ELI - Q077 (K09-50616-10) HERCULES TRACK EXT 10
  • ELI - Q080 (K75-50138) Dolly latch
  • ELI - Q081 (K11-50139) HERCULES LIMIT EXT RD
  • ELI - Q082 Limit switch nuts
  • ELI - Q084 (K80-50142) Lock, Cam & Key (CSW and Robo SW SL3000U)
  • ELI - Q085 (K09-50756) Dolly cover for Hercules trolly
  • ELI - Q086 (K87-E-050) Overhead retaining spring clip
  • ELI - Q087 (K80-50145) Emergency pull ring
  • ELI - Q088 (K75-50146) Overhead door gate arm
  • ELI - Q089 (K75-50147) Hercules Trolley Body Assembly
  • ELI - Q095 (K77-50153) Overhead arm bushing
  • ELI - Q103 (K75-50292) Uphill Swivel Arm Kit (all CSW)
  • ELI - Q104 (75-50293) ARM PACKAGE CSW/ROBO
  • ELI - Q108 (K27-50294) Heater, Tape, Gearbox (120V 45W)
  • ELI - Q118 (K80-50295) Key for Access Door (CSW, Robo Swing, SL3000U)
  • ELI - Q123 (K20-9012B-1) Motor: Robo SL/SW & Repl for DC1000
  • ELI - Q135 (K11-50166) Limit Swith Bolt for Robo Slide
  • ELI - Q150 (K77-50174) Bracket: DC Motor Bracket (DC1000/DC2000, CSW/SL)
  • ELI - Q163 (K16-50186) V-Belt: 4L240, AX22 (CSW-200 1/2HP w/BBU)
  • ELI - Q166 (K75-50189) Limit Switch Assy
  • ELI - Q175 (K16-50195) V-Belt: 4L270, AX25 (CSW-200 1HP or DM)
  • ELI - Q180 (K07-50199) Coupling, 1" for Robo Slide
  • ELI - Q183 (K15-50B16EES) Sprocket:
  • ELI - Q198 swivel arm replacement eye bolt
  • ELI - Q206 (K-001A5867) PCB: Circuit Board for Robo Swing/Slide
  • ELI - Q208 (K75-50222) Clutch Set for CSW (POST 10/95) ( K75-50222)
  • ELI - Q209 (K17-50223) Pulley Motor
  • ELI - Q210 (K75-50224) Gear Reducer: CSW, Upper (Size 70)
  • ELI - Q212 (K32-50225) Gear Reducer: CSW/ROBO, Lower (Size 40)
  • ELI - Q213 (K19-35072) Endless Chain #35x72P for CSW
  • ELI - Q216 (K07-50227) Output Shaft for size 70 Gearbox
  • ELI - Q220 (K09-50230) Chassis, CSW200, (2nd Gen) #70 Gear Reducer
  • ELI - Q230 (K77-50240) LA500 Mounting Brackets (Kit)
  • ELI - Q238 (K75-50339) Limit Cam (CSW/Robo Swing)
  • ELI - Q244 (K75-50247) Cover UL Replacement(CSW-200 and RoboSwing)
  • ELI - Q248 (K32-50251) Gear Reducer: HCT Series (40:1)
  • ELI - Q250 (K20-1050C-1T) Overhead Door Motor C-Face
  • ELI - Q268 (K13-50260) Gray Cludge Cover
  • ELI - Q277 (K94-50262) DISCONTINUED Wire Harness DC2000 (CSW & SL)
  • ELI - Q400E PCB: Omni Board w/ Reset Button (firmware REV 1.7)
  • ELI - Q400E-1 PCB: Omni Board (old firmware REV 1.3)
  • ELI - Q400MAU (K74-50276) Maglock Relay (Omni Brd)
  • ELI - Q401 (K-001A5872) PCB: 1 HP board (SL-CSW OMNI board)
  • ELI - Q403 (K74-50278) Electronic Box Assembly for 1 HP units (SL-3000 & CSW-200)
  • ELI - Q405 (K29-50280) Omni Power Switch, ON and OFF
  • ELI - Q407 (K94-50281) Omni Motor Wire Harness 1HP (CSW-200 & SL-3000)
  • ELI - Q408 (K-74-50282) SWITCH CHANNEL,OMNI
  • ELI - Q409 (K41-50283) Plexi-Glass Cover for OMNI board control box
  • ELI - Q410 (K70-51060) Surge Suppressor (Omni board)
  • ELI - Q520 (K94-50286) CSW Omni Motor Harness
  • ELI - Q521 (K94-50287) Motor Harness (DM CSW)
  • ELI - Q523 (K77-50289) Motor Mount for CSW 200
  • LIF - 041A5434-11A 7 ft. Belt Assembly Replacement Kit, Residential
  • LIF - 041ASWG-0014SA Rear Connector for the LA400
  • LIF - 041ASWG-0119 Release Key for LA400 / LA500
  • LIF - 041ASWG-0438SA Motor: LA400, with limit switches and harness
  • LIF - 041ASWG-0489 Cable with Connector for LA400
  • LIF - 050DCRJWFMC Receiver Logic Board, DC, Wifi, RJO
  • LIF - 10-3515 retainer guide reducer shim SL580 and SL590
  • LIF - 10-8021 Panel, Electrical
  • LIF - 10-9099 Bracket: Heavy 1/2-inch Steel Wall Mounting Bracket
  • LIF - 11-19485 Output shaft for the SL575
  • LIF - 11-2725 RSW Shaft
  • LIF - 11-3503 #50 Eye Bolts
  • LIF - 11-3601 (drive shaft SL590)
  • LIF - 11-3602 Idler Shaft
  • LIF - 12-8033 (Female Rod End (BG) RH
  • LIF - 19-3025 Chain: #50, Nickel Plated, 25'
  • LIF - 20-40155 12V DC motor for SW425
  • LIF - 29-40376 Relay: 900D SPT 12 volt DC
  • LIF - 3150Z Adjustable Roller Cage Bearing Hinge - Bolt Gate, Bolt Post
  • LIF - 41ASWG-0594SA Motor With Limit Switch Harness for LA412
  • LIF - 44-30703 Cabinet/Enclosure for SL595
  • LIF - 71B240G Brake Kit 230/460V w/ Solenoid
  • LIF - 76-G0537 (Alarm assembly)
  • LIF - 80-207-19 Step Key 1/4 x 1/4 x 1/2 long
  • LIF - 86-RP10-110 roll pin for the SL575
  • LIF - 91-G0149 Idler Bolt
  • LIF - A12330SGLPK Battery: 12V, 33 Ah (Battery for LA412/RSL/RSW)
  • LIF - Chip K 127A0070 Kit V8.0, MIR-1
  • LIF - G305075514 Clutch Assembly Kit for SL590
  • LIF - K-127A0113B Mega Arm Sprint Micro Chip
  • LIF - K-SL5851081G3 E-Box, Complete for SL585 1HP 208V 1PH
  • LIF - K001A5566 PCB: GL Replacement Board
  • LIF - K001A5747 Receiver module for the LA400
  • LIF - K001A6039 PCB: Control Board, LA400, (Blue)
  • LIF - K001A6407-1 RPM Sensor for the RSW
  • LIF - K001A6426-1 PCB: Control Board, LA412, (Blue)
  • LIF - K001A6426-2 PCB: Control Board, RSL, RSW, (Blue)
  • LIF - K001A6837 PCB: Logic board for CDO's
  • LIF - K07-2706 RSW Arm Hub
  • LIF - K10-30702-2 Chain Guard Top Cover
  • LIF - K10-3209 Bracket: Gate Bracket Kit
  • LIF - K10-37598 Cover/Door for HCTDCU, HCTDCUL Hercules OH Gate Op
  • LIF - K12-10458 Bearing
  • LIF - K13-10024 Limit Nut
  • LIF - K13-32087 RPM Sensor Cup for Various LIF Operators.
  • LIF - K13-34729 E-Box Plastic Covers
  • LIF - K13-3510 Chain Guide SL580
  • LIF - K13-36117-1 Cludge Cover "Hat" for CSW24UL
  • LIF - K15-3001 Sprocket: 40B32 1"x1/4" 2-SS
  • LIF - K15-41B17LKGH Sprocket: Drive sprocket for CSL24U
  • LIF - K15-41B25LGH Sprocket: Drive Sprocket for SL3000U
  • LIF - K15-5032 (50B32 1-1/2"x1/2" sprocket)
  • LIF - K15-50B18LKGH Sprocket: #50, 18 tooth, 1" bore (CSW24)
  • LIF - K16-4L230 V-Belt: for SL3000U
  • LIF - K16-8002 V-Belt: 4L330 (BG770/790)
  • LIF - K16-GT2-4 V-Belt: Timing belt (RSL12)
  • LIF - K16-GT2-7 V-Belt: Timing Belt for CSL24V, 3M
  • LIF - K16-GT2-9 V-belt: Drive Belt for RSL12U
  • LIF - K17-36530 Pulley kit, Gear Reducer and Motor
  • LIF - K180A0357 Key Reset Switch for CSL24V and VDC
  • LIF - K180B0325-5 Service Kit, AC Power Switch
  • LIF - K19-35056 Limit Switch Chain for RED BOARD SL3000
  • LIF - K19-50038 Chain Kit: #50, Gear Reducer CSW24
  • LIF - K19-50040 Chain Kit: #50, Gear Reducer CSW200501/101
  • LIF - K1A6408 APE Assembly w/ RPM Board
  • LIF - K1D6597-1CC PCB: Control Board, CSL24V, CSW24V (Green 1st Gen)
  • LIF - K1D6686CC PCB: Expansion Board, CSW24V, CSW24V, LA500, (Green)
  • LIF - K1D6761-1CC PCB: Control Board, CSW200U/UL, SL3000U/UL, SL585U/UL, SL595U/UL (RED)
  • LIF - K1D7078 EMI Board for LA500
  • LIF - K1D8052-1CC PCB: Control Board, LA500DC, LA400DC, LA412DC, (Green)
  • LIF - K1D8059-1CC PCB: Control Board, CSW24DC, CSL24DC, RSW12DC, RSL12DC (Green 2nd Gen)
  • LIF - K1D8080-1CC PCB: Expansion Board, CSW24DC, CSL24DC, LA500DC, (Green)
  • LIF - K1D8247 Hall Effect Sensor for CSW200501/101U & UL Models.
  • LIF - K1D8284-1CC PCB: 1 HP Motor Drive Power Board
  • LIF - K1D8387-1CC PCB: Expansion Board, for all "U/UL" version operators (Red)
  • LIF - K1D8388-1CCMC PCB: Control Board, LA500U, LA412U, LA400U, (Red)
  • LIF - K1D8389-1CC PCB: Control Board, CSW-CSL24U, & RSW-RSL12U (Red)
  • LIF - K1D8402-1CC PCB: Power Board, CSW200-SL3000, U and UL versions
  • LIF - K1D8424-1CC PCB: Motor Drive Board, 3 PH, for SL585 & SL595
  • LIF - K20-1050B-1RSX Motor: 1/2 HP for SL3000501U and CSW200501U
  • LIF - K20-1050B-2P Mech Operator Motor 1/2 HP 120/230 VAC
  • LIF - K20-3100C-4T Motor: 230/460V TEFC, 3PH, 1HP
  • LIF - K204B0195-1 Transformer: (14.5VAC, 30VA) Plug-In, RSW-RSL
  • LIF - K204C0211 Transformer: Toroid Replacement Kit for CSW24v CSL24V
  • LIF - K21-36793 Transformer: 208/230/460V-20VA
  • LIF - K21-38158 3PH L5 Current Sense Harness Kit
  • LIF - K22-120 Brake Solenoid Kit 120V
  • LIF - K22-36899 Brake Solenoid, 1PH, L5
  • LIF - K22-36900 Brake Solenoid, 3PH, L5, Solenoid Replacement Kit (208V-230V/60Hz)
  • LIF - K23-19380 Reset Switch for LA400/412
  • LIF - K23-2761 Switch,Rocker,16A,125-250V,3/4HP
  • LIF - K23-30716 Stop Switch, 125VAC, 6 amp
  • LIF - K23-34815 Stop/Reset Button (Liftmaster)
  • LIF - K24-115-1 Relay: DPDT, 115V COIL (IR)
  • LIF - K24-230-5 Relay: TPDT, 208/230V Coil (IR)
  • LIF - K24-24-02 Relay: Small 12VAC TPDP Sckt Mt
  • LIF - K24-24-03 Relay: SMALL 24VDC TPDT RELAY F
  • LIF - K24-24-1 24VAC DPDT Relay
  • LIF - K24-24-6 Relay: 3PDT 24 Volt
  • LIF - K24-264-4 Relay: 24VDC DPDT SM FLGE
  • LIF - K25-2015 Single Phase Overload 15Amp
  • LIF - K25-4002-5K Overload 1.6-2.5 AMP
  • LIF - K29-31229 Relay: 24vdc SPDT
  • LIF - K29-31244 Relay: 24vdc DPST
  • LIF - K29-32410 Alarm Module Kit for SL575/585/595
  • LIF - K2A0878 Hall Effect Board for SL3000U
  • LIF - K305-153613 Idler Sprocket Assy for SL590
  • LIF - K32-34655-1 Gear Reducer: CSW24V, 30:1
  • LIF - K32-34656-1 RSW Gear Reducer Top 30:1
  • LIF - K32-34669-1 Gear Reducer: CSL, (10:1 #60)
  • LIF - K32-34792 Gear Reducer, 30:1, For SL585
  • LIF - K32-35814 Gear Reducer: CSW24V (30:1)
  • LIF - K32-35814-1 Gear Reducer for CSW24U CSW24UL CSW24VDC
  • LIF - K32-37349 Gear Reducer and Brake for SL3000U
  • LIF - K32-37433-1 Bottom Gear Reducer for CSW200501UL & CSW200101UL
  • LIF - K32-37560-3 Gear Reducer, 28:1 for HCTDCU
  • LIF - K32-8002 Gear Reducer: BG 770-790
  • LIF - K41-0048-000 Reset with ID Resistor HD Gates
  • LIF - K41-0051-000 APE assembly for HDSL24UL slide gate operator
  • LIF - K41-0062-000 Gear Reducer for HD Slider
  • LIF - K41-0071-000 Power board for HD Gates for HDSL24UL & HDSW24UL
  • LIF - K41-0073-000 PCB: Main board for HD Gates for HDSL24UL & HDSW24UL
  • LIF - K41-0079-000 Gear Disconnect for HD Operator
  • LIF - K41-0082-000 Motor: for HD Operators
  • LIF - K41-0083-000 Bridge Rectifier, HD Gates
  • LIF - K41-0085-000 Cludge Assembly, HDSW24UL
  • LIF - K41-0090-000 Cover: for HDSW24UL
  • LIF - K41-0092-000 HDSW24UL APS Encoder
  • LIF - K41-0095-000 BLDC Motor Drive, HD Gates for HDSL24UL & HDSW24UL
  • LIF - K41-0118-000 Idler Pulley/Sprocket, Qty. 2, HD
  • LIF - K41-0244-000 PCB: Motor Drive Board, BLDC Power, INSL24UL
  • LIF - K52C0481 Kit, Svc Rectifier for CSW24v CSL24V
  • LIF - K65-1208 Replacement Wishbone Arm for BG790
  • LIF - K70-35677 KIT,SVC,LIMIT-SHAFT/SPRKT/CHN for RSW
  • LIF - K71-33445 KIT,RESET SWITCH,OMNI
  • LIF - K71-B1PH Internal Brake Solenoid, 120/240V, 1PH (Comm Dr Operators)
  • LIF - K71-B1PH-1 Brake Solenoid, 120/240V, SL585U/SL595U
  • LIF - K71-B240 Internal Brake Solonoid Assy.
  • LIF - K72-18615 SVC KIT DRIVE SHAFT ASSEMBLY SL590
  • LIF - K72-34818 LIMIT SHAFT KIT
  • LIF - K72-34844 Output shaft kit for the SL575
  • LIF - K72-34845 for SL575 Clutch Shaft Kit
  • LIF - K73-34718-1 Chassis for RLS12V
  • LIF - K73-34718-5 Chassis for CSL24
  • LIF - K73-36109-1 Chassis For CSW24U & RSW12U
  • LIF - K73-37195 Chassis Replacement Kit- see Details
  • LIF - K73-37199 Chassis for LiftMaster SL3000 Series (Not Elite)
  • LIF - K74-18379 Hall Effect Sensor (SL 540, 570, 575, 580)
  • LIF - K74-18381 Hall Effect Assy SW420
  • LIF - K74-30754 LA400 Battery to Board Wire Harness: White 2 pin head
  • LIF - K74-30762 Battery: 12V, 7 Ah (2-Batteries with harnesses)
  • LIF - K74-30763 Transformer: (36VDC, 40VA) Plug-In
  • LIF - K74-34582-1 Control Box, Gray Plastic, LA500DC
  • LIF - K74-36798-2 Control Box LA400
  • LIF - K74-36798-3 Control Box, Black Plastic, LA412U, LA412UL
  • LIF - K74-39307-1 Control Box, Black Plastic, LA500U, LA500UL
  • LIF - K74-40084 Bridge rectifier kit
  • LIF - K74-G0589 Hall effect sensor
  • LIF - K75-15480 Control Box, Gray Plastic, Small, LA400, LA412
  • LIF - K75-18493 Chain Guide Kit
  • LIF - K75-18620 Limit Box Assembly Kit SL590
  • LIF - K75-19095 Drive wheels for 2 HP HS670
  • LIF - K75-34709-1 Control Enclosure w/Mounting Hardware (for most pad mount LIF units.
  • LIF - K75-34790 Disconnect Kit, SL585GL
  • LIF - K75-34791 Clutch Kit, SL585GL
  • LIF - K75-34824 Chain guard kit for SL585/SL575
  • LIF - K75-34828 Idler Shaft Kit (see details)
  • LIF - K75-34986-2 Battery Tray & Heater Mnt Bracket Combo CSL24
  • LIF - K75-35400-1 RSW12V Operator Cover
  • LIF - K75-36260 Lock & Key (CSW200U)
  • LIF - K75-36635 Control Board Bracket
  • LIF - K75-36914 Electrical Box Cover
  • LIF - K75-37300-1 Electrical Control Box for SL3000
  • LIF - K75-37549 Disconnect Kit for SL595U
  • LIF - K75-39337 LA500 Trolley Nut Kit
  • LIF - K75-40147 Service Kit Motor Reducer Assembly for SW425 operator
  • LIF - K76-19446 Piezo Audio Anunciator for LA400
  • LIF - K76-34644 APS Encoder Assembly, CSW24UL - RSW12UL
  • LIF - K76-34697 APS Encoder Assembly, CSL24V
  • LIF - K76-34697-3 Encoder Assly 12V RSL12UL
  • LIF - K76-34728 Kit, SVC High-Voltage Assembly for CSW24V CSL24V
  • LIF - K76-34740 Limit Switch Assembly for the RSL12V
  • LIF - K76-35321 Service Kit Limit Switch, Older RSW
  • LIF - K76-35664 RPM Counter for RSL
  • LIF - K76-36398 Motor: 1/2 HP Motor 24 VDC CSW24/CSL24
  • LIF - K76-37253 Motor: 1/8 HP, 12VDC RSL 12UL
  • LIF - K76-37325 Limit Rack Kit (READ DETAILS)
  • LIF - K76-37667-2 SL595 Limit Box Assembly
  • LIF - K76-38732 Motor: 24VDC Replacement motor for the HCTDCU
  • LIF - K77-19130 LA400 Front & Rear Mounting Bracket Kit
  • LIF - K77-36389 Hardware Bag for LA500
  • LIF - K77-36539 Output Shaft w Sprocket
  • LIF - K77-37183 Cover Kit, CSL24V, (Front and Back) Black
  • LIF - K77-37334 Motor: 1/8 HP 12 VDC for RSW 12VDC RSW 12UL
  • LIF - K77-37635 Sprocket and Limit Chain Kit for CSW200U
  • LIF - K77-37637 Cover: Replacement Cover for CSW200501U, 1/2 HP
  • LIF - K77-37683 Main Board Standoffs, Qty 10
  • LIF - K77-37693 AC Wire Harness for CSW200 & SL3000
  • LIF - K77-37708 Cover, SL3000UAC
  • LIF - K77-37709 On/Off Switch and Receptacle Box for SL3000U
  • LIF - K77-37710 Brake Kit: for SL3000U Operators
  • LIF - K77-37852 Cover Kit, CSL24U, (Front and Back)
  • LIF - K77-37853 Cover Kit: CSW24U, (Front and Back) Black
  • LIF - K77-37855 RSL Cover (Front and Back)
  • LIF - K77-37856 Front Cover, CSL24, CSW24U, and RSW12U
  • LIF - K77-38078 Operator Cover and Cludge Cover for CSW200101
  • LIF - K77-38121 Wire Harness, SL585U, SL595U
  • LIF - K77-39425 Front Cover, RSW12UL, CSL24UL & CSW24UL, Gray
  • LIF - K77-39426 Cover Kit, CSL24UL Operator Cover (front and back)
  • LIF - K77-39428 Cover Kit, CSW24UL Operator Cover (front and back), Gray
  • LIF - K77-39430 Cover Kit, RSW12UL Operator Cover (front and back)
  • LIF - K87-E-118 Idler Shaft E-Ring for SL595
  • LIF - K94-34778 Main Board To Expansion Board Wire Harness, 24V
  • LIF - K94-35659 Reset Switch and harness for RSL12V and VH
  • LIF - K94-36250 Battery Harness for CSW24V and CSL24V 7AH
  • LIF - K94-36274-1 LA400DC Battery Harness
  • LIF - K94-36274-2 J15 Wire Harness Kit LA500
  • LIF - K94-36408-1 Reset Switch, LA500, with ID Resistor
  • LIF - K94-36408-2 Reset Switch, LA400, with ID Resistor
  • LIF - K94-36408-3 Reset Switch, LA412, with ID Resistor
  • LIF - K94-36411 Replacement Piezo Alarm
  • LIF - K94-36531 Harness with Resistor for CSL24V
  • LIF - K94-36540 CSW24 Wiring Harness with Product ID Assembly
  • LIF - K94-36591 LA500 Secondary Cable 40 Feet With Junction Box
  • LIF - K94-36596 Battery Harness: 33 Amp
  • LIF - K94-37259 Wiring Harness for RSL
  • LIF - K94-37449 Reset Button Kit with ID (CSW200U)
  • LIF - K94-37468 Reset Button Kit with ID (SL3000U)
  • LIF - K94-37694-1 Motor: Motor for SL585501UL 120V 1/2 HP
  • LIF - K94-37848-2 Motor Assembly, SL595151U, 1.5 HP
  • LIF - KMALEDHDWCB LED Barrier Arm Hardware Kit
  • LIF - LA400CONTUL Control Box: LA400 Standard 24VDC
  • LIF - LA412VXFMR Transformer: Access Kit for the LA412
  • LIF - LA500 HDT KIT STD Transformer: Toroid Kit
  • LIF - LM-K75-18618 Manual Disconnect
  • LIF - MA006 Chassis for Mega Arm (non tower version)
  • LIF - MA014 Stainless Steel Bolts for the cover for the Mega Arm Tower
  • LIF - MA015 Transfomer: 24V Mega Arm
  • LIF - MA022 Arm Bolt for MA/MAT
  • LIF - MA029 Replacement yellow foam padding 14 ft. long 4" Rnd
  • LIF - MA036 Collar for Mega Arm
  • LIF - MA200 Relay: K1 Relay Output Option
  • LIF - MALEDCW 17 Foot LED Arm Counterweight
  • LIF - MAREDLED12 Red LED light strip for MALED12
  • LIF - MAREDLED17 Red LED Light Strip for MALED17
  • LIF - SW008 HSW 2" Pulley with 5/8" Bore
  • LIF -23-10916 Swith,Spdt,15A,125/250VAC,Interlock
  • LIF -K42-3608 Term-Block,08-Pos,S3
• Linear Pro Access (Nortek)
  • GCI - A126 Key for the AK11 and MDKP
  • GTO - PRO-2000ARMXLS Replacement Arm, 6 ft Cable XLS
  • GTO - PRO-2002ARMXLS Replacement Arm for SW2002XLS w/ 32' Cable
  • GTO - PRO-3000ARMXLS SW3000XLS Replacment Arm w/ 6 ft. cable
  • GTO - PRO-4000ARMXLS Replacement Arm for SW4000XLS
  • GTO - R4192 Rev Counter Board for SW2000XLS
  • GTO - R4211 PCB: Circuit Board Upgrade Kit UL 325, Red Board
  • GTO - R4722/R5722 PCB: Control Board for 2000XLS
  • GTO - RVCTBD3040 Rev Counter Board
  • GTO - RVCTBD50 Rev Counter Board (MM500) and 350 mighty mule
  • GTO - RVCTBDXL Rev Counter Board (SW3000XL/4000XL)
  • LIN - 2100-051 Rail Guide, Lower Linear Arm
  • LIN - 2100-052 Osco Cover Rain Linear Arm
  • LIN - 2100-1168-BT Cover: Linear Arm 78.5" Blktex.
  • LIN - 2110-117 Gear Reducer 75:1 with Crank Arm Assy.
  • LIN - 2110-130 Shaft lntetmediate W/Sprocket SWG
  • LIN - 2110-170 Shaft Drive Assy BGU Brtznc for BGU-10-311
  • LIN - 2110-441 Connecting Link w/Bearing for SG
  • LIN - 2110-566 Shaft lnShaft Drive W/Sprkt SWG
  • LIN - 2110-648 Complete 78" Gate Arm Assembly
  • LIN - 2110-732 UPS, Flange Assy Bg Arm Rect Ups for BGU-10-311
  • LIN - 2200-004-UPS Osco Sprocket 40-B-13 1B 5/8LTB
  • LIN - 2200-081 60:1 Gear Reducer for SWD211
  • LIN - 2200-097 Gear Reducer 60:1 for SWG
  • LIN - 2200-136 Bearings Only
  • LIN - 2200-264 Bearing Pillow Block, 1 1/8 inch
  • LIN - 2200-281 Sprocket 40-A-36 2.001B +.001 -0.
  • LIN - 2200-584-UPS Torque Limiter 3 3/4B Ups.
  • LIN - 2200-942 Gear Reducer 20:1 fits SLR211
  • LIN - 2300-697 Idler Wheel SLR UHMW
  • LIN - 2300-716 Grommet Rubber Front Cover
  • LIN - 2400-188 Thrust Washer for Barrier Gate SG
  • LIN - 2400-527 1/2" Shoulder Bolt
  • LIN - 2500-1495 Stop/Reset button
  • LIN - 2500-1742 6 Amp Slow-Blow Fuse
  • LIN - 2500-2245-UPS NTR Drive-H VS 1/2 - 1 HP 115V (Hitachi Motor Drive)
  • LIN - 2500-2291 Switch MCR Starter 30A 2P 600V
  • LIN - 2500-2312 Cap Motor 1Hs 208-230V 1 ph
  • LIN - 2500-2315-UPS MTR-L 1H 230/460-3 W/Har Ups
  • LIN - 2500-2396 Brake C-Face 115VAC
  • LIN - 2500-2399 Board, Motor DC Pwm UL/ETL
  • LIN - 2510-295 VS Circut Board/Motor Board for VS-GSWG-781
  • LIN - 2510-419 Transformer Assy 500VA, SLD Apex operators
  • LIN - 2510-432 Power Box assembly
  • LIN - 2510-500 Harness interior 208/230 3ph LG
  • LIN - 2510-529 MCR Drive VS Assy 1/2 - 1 HP 230
  • LIN - 2700-082 Complete 25' Wishbone Gate Arm Assy.
  • OSC - 2100-1886 Arm Attachment Channel for BGU
  • OSC - 2100-765 Pulley Shaft
  • OSC - 2110-248 Upper rail guide Assembly, with bearing for the VS-GSWG
  • OSC - 2110-796 Main Frame for SLC machine
  • OSC - 2110-823 Idler wheel Assembly
  • OSC - 2200-016 MOISTURE SEAL 3/4
  • OSC - 2200-030 Limit Nut (all OSCO SL)
  • OSC - 2200-540 Key for large box operator
  • OSC - 2200-910 Aluminum arm 12'
  • OSC - 2220-011 Sprocket: IDLER W/BRG ASSY GSWG
  • OSC - 2300-208 Wood Arm 14' for BGU
  • OSC - 2300-897 Warning Label for BGU arm
  • OSC - 2400-067 WASHER 1I.D. X 2.50 O.D.
  • OSC - 2500-1902-UPS Motor: 24 Volt DC
  • OSC - 2500-1966 Fuse, 2 Amp, (Automotive style)
  • OSC - 2500-2309 Motor: 3/4HP, 1PH 115 VAC
  • OSC - 2500-2310 Motor: 3/4 HP 1 PH 280/230 VAC
  • OSC - 2500-2393 Apex Board, UL/ETL
  • OSC - 2500-868 Auto Close Timer
  • OSC - 2510-223 Transformer: fuse package
  • OSC - 2510-247 PCB: Board Control Assembly Package
  • OSC - 2510-295 PCB: Control board 3 Phase
  • OSC - 2510-431 Box Power Assy SLD Apex
  • OSC - 2510-439 Apex Board, w/Pwm Mtr Brd Assy
  • OSC - 620-101292 Apex-II Board w/Uce Assy
  • OSC - 620-101293 Apex-II Board Assy
• Magnetic Automation Corp
  • MAG - LEDS21C-12M 1 pre-cut Spare LED Strip for 12 ft MicroBoom Barrier Arm
  • MAG - 1031.0321 MIB Potentiometer
  • MAG - 1031.5055 MIB Octagonal Arm flange with boom mount kit
  • MAG - 1031.5867 MicroDrive Break Away Flange
  • MAG - 1052.5105 Varioboom Without Grey Section 10'
  • MAG - 1052.5106 VarioBoom, Wht Section Only 12 ft.
  • MAG - 2036.5008 Weak Tension Springs
  • MAG - 2041.5077 MicroDrive Counter Bearing Flange Tube
  • MAG - 2061.0010 Microdrive Housing (Short) Complete in Dark Grey RAL9007
  • MAG - 2061.0040 Microdrive Housing (Short) Complete in White RAL9010
  • MAG - 2063.0009 front arm assembly
  • MAG - 2063.0010 Rear Arm Assembly
  • MAG - 3004.0001 MIB Rubber End Stop
  • MAG - 3004.5002 MBE Rubber End Stop
  • MAG - 3019.0054 Plastic Shaft Bushing
  • MAG - ASF01-KIT VarioBoom Short grey profile with small parts kit.
  • MAG - BSPS01 Hardware Kit for Pendulum Support
  • MAG - DHX01 Microdrive Hood Gasket Kit (see details)
  • MAG - EKS01 End Cap Front or Back
  • MAG - EKS02 End Cap, Sm Barrier Arm End Cap, Grey (Pkg of 5)
  • MAG - FLSA-MBS Swingaway flange for octagonal arm up to 12' max
  • MAG - FLVB03 Breakaway Shims
  • MAG - GTS01 #18 MicroDrive Lock Set (Includes 2 Keys)
  • MAG - GTS02 Magnetic set of keys for MIB hood & MIB/MBE door.
  • MAG - KTFL01 Flange, Small Parts Set
  • MAG - LC010 ARM: VarioBoom Arm 10ft w/LED Strips
  • MAG - LEDS21C-10V 1 pre-cut Spare LED Strip for 10 ft VarioBoom Barrier Arm
  • MAG - LEDS21C-12V 1 pre-cut Spare LED Strip for 12 ft VarioBoom Barrier Arm Uninstalled
  • MAG - LEDS22C 1 Spare LED Strip for Mic Dr Barrier Arms 12ft.-20ft. Uninstalled
  • MAG - MGC-DUO1 Micro Drive MGC Display
  • MAG - MGC-PRO-A100-0001 Controller for Magnetic AutoControl
  • MAG - MGFV21 Pre-assembled Vertical Bars Set for Skirt - 1m
  • MAG - MHP-244A-E100 Motor: for Toll, Toll Pro, Parking Pro and Access Pro
  • MAG - MHP-245A-E100 Motor: Access Pro L or Access Pro H
  • MAG - MICROBOOM-NC012 Barrier Arm (MicroBoom) 12ft.
  • MAG - MICROBOOM-NC020 Barrier Arm (MicroBoom) 20ft.
  • MAG - MICROBOOM-XLC028 Barrier Arm (MicroBoom) 28ft.
  • MAG - MSB 5N-035 ARM: 12 foot Aluminum barrier arm octagonal
  • MAG - MSB 5N-060 ARM: 20 foot aluminum barrier boom octagonal shaped
  • MAG - MUB4C-403 Controller: AutoControl Multifunction Logic for MTS Barriers
  • MAG - PULT02 MicroDrive and Flow Motion Dual Lane Control Panel
  • MAG - SBXV-N028 Microdrive Complete XL Boom (Sm Profile) Frnt Sec for 28ft.
  • MAG - SDK01 MicroDrive flange cover plate
  • MAG - VarioBoom-NC010 Complete Inc. Both Wht & Gry Sections, 10 ft.
  • MAG - VarioBoom-NC012 Complete Inc. Both Wht & Gry Sections, 12 ft.
  • MAG - VarioBoom-NC015 Complete Inc. Both Wht & Gry Sections, 15ft.
• Maximum Controls, LLC
  • MAX - 40BS-12 Sprocket: 12 Tooth Sprocket for MAX machines
  • MAX - MX-CBK Chain: Max Chain KIT , Size 40NP25 FT
  • MAX - MX-PSC Power/Solar In Cable
  • MAX - MX-TKS Cover: Megatron Tank Metal Cover
  • MAX - MX001 Front cover door, includes Cam-Lockand and Max emblem.
  • MAX - MX002 Front slide door with hardware (all slide gate operator models)
  • MAX - MX003 Slide Gate Operator Cover (All Except Rhino)
  • MAX - MX004 Low Profile Swing Gate Operator Cover (Phantom 220, Phantom F6)
  • MAX - MX005 Mid Profile Swing Gate Operator Cover
  • MAX - MX006 High Profile Swing Gate Operator Cover
  • MAX - MX006-5 Swing Gate Hood (Ball Cap)
  • MAX - MX007 Camlock w/ Keys, Access Door, (A126 Key blank)
  • MAX - MX008 Max emblem w/ hardware (all models)
  • MAX - MX009 Plastic Camlock Housing Assembly (All Swing Gate Models)
  • MAX - MX010 Camlock w/ Keys for Operator Cover/Hood (All Models)
  • MAX - MX011 Keyless Access Cover & Hood Latch (All Swing Gate Models)
  • MAX - MX012 Operator cover locking bracket / hood / bracket (all models)
  • MAX - MX013 Chain: #40NP25 25 ft long - 40 NP chain ONLY
  • MAX - MX014 Chain Magnet (all slide gate operators except Rhino)
  • MAX - MX014-R Chain Magnet (for Rhino only)
  • MAX - MX015 Sprocket: Output sprocket, 22 teeth size 40
  • MAX - MX016 Sprocket: Output sprocket, 30 teeth size 40 (Max F18)
  • MAX - MX016-1 Sprocket: Output Sprocket, 23 Teeth Size 40
  • MAX - MX016-2 Sprocket: Output Sprocket, 15 Teeth, Size 40
  • MAX - MX017 Idler Sprocket Wheel (all slide gate operators except Rhino)
  • MAX - MX018 Output clamp assembly (all swing gate operators)
  • MAX - MX019 Handle Release (All Swing Gate Operators)
  • MAX - MX020 Output shaft (Various Operators)
  • MAX - MX021 Gear Box Shaft for Various Megatron Operators
  • MAX - MX022 Position collar / Ring assembly (all swing gate operators)
  • MAX - MX023 Output Arm T-bar (all pad mount swing operators)
  • MAX - MX024-1 Arm assembly, Long (54"x36")
  • MAX - MX025 Arm Assembly, Standard (Pad Mount Swing Operators)
  • MAX - MX026 Magnetic limit sensor (All Slide Operators)
  • MAX - MX027 Limit Switch Assembly (2013-2018) Swing Operators
  • MAX - MX027-5 Limit Switch Assembly PRO version Operators
  • MAX - MX028 PCB: Matrix 1 Control Board Assembly
  • MAX - MX029 ID Plug (Max 1500/1500 PRO)
  • MAX - MX029-5 ID Plug (Max 1700 FS/1700 FS PRO)
  • MAX - MX030 ID Plug (Max 2200/2200 PRO)
  • MAX - MX031 ID Plug (Max F18/F18 PRO)
  • MAX - MX032 ID Plug (Megatron 1400/1400 PRO)
  • MAX - MX033 ID Plug (Various Megatron 2200 Models)
  • MAX - MX034 ID Plug (Megatron FAST/FAST PRO)
  • MAX - MX035 ID Plug (Megatron 1400 HP/HP PRO)
  • MAX - MX036 ID Plug (Phantom 2000 PLUS)
  • MAX - MX037 ID Plug (Phantom F6)
  • MAX - MX038 MC-100 Motor Controller Assembly (Phantom 2000, Phantom F6)
  • MAX - MX039 MC-200 Motor Controller Assembly
  • MAX - MX040 MC-200 Motor Controller Assembly (Max Slider Series)
  • MAX - MX041 Phantom Power supply assembly
  • MAX - MX042 Max Power Supply Assembly (All Slide Operators except Rhino)
  • MAX - MX043 Megatron power supply assembly (All Megatron's except Tank)
  • MAX - MX044 Max BC-7 Battery Module (Various Operators)
  • MAX - MX045 Yuasa Battery (7 AHR) 24 VDC (all operators)
  • MAX - MX046 Battery Status Cable (all operators)
  • MAX - MX046-3 Battery Cable (all Matrix operators)
  • MAX - MX047 Alarm / UL Buzzer (all operators)
  • MAX - MX048 Alarm Reset Button (all operators)
  • MAX - MX049 Gate shut-off switch / gate disable switch (all slide gate operators)
  • MAX - MX050 Open/Close Jog Key Switch, with 2 keys
  • MAX - MX051 Rotary knob (all operators)
  • MAX - MX052 Brushless DC Motor, Sq flange, EQV to 1-1/4 HP
  • MAX - MX052-1 Brushless DC Motor, Sq flange, EQV to 1/2 HP
  • MAX - MX053-2 Brushless DC Motor, Rnd flange, EQV to 1/2 HP
  • MAX - MX054 Gear Reducer Size 60 (30:1) Square Flange
  • MAX - MX054-2 Gear Reducer Size 60 (20:1) MAX 1700 FS PRO
  • MAX - MX054-4 Gear Reducer Size 50 (20:1) MAX 1200 FS PRO
  • MAX - MX055 Gear Reducer Size 50 (30:1) (Max 1500)
  • MAX - MX057 Gear Reducer Size 80 (900:1) Round Flange
  • MAX - MX058 Gear Reducer Size 80 (900:1), Round Flange
  • MAX - MX058-5 Gear Reducer size 80 (900:1), Square Flange
  • MAX - MX062 Switch Control Assembly (all operators)
  • MAX - MX064 Chassis: All Swing Gate Operators Except HP Swing
  • MAX - MX065 Chassis for Megatron 1400 HP & 2200 Plus HP
  • MAX - MX100 Short Bushing for Elbow of Swing Gate Operator Arm
  • MAX - MX101 Long Bushing for End of Arm of Swing Gate Operator Arm
  • MAX - MX106 Max Actuator DSP Control Box Toroid Box
  • MAX - MX107 DSP Arm Controller ID Plug
  • MAX - MX109 Actuator Motor
  • MAX - MX110 Camlock w/ Keys, MAX AC & Solar Control Box, (J236 Key Blank)
  • MAX - MX112 Bracket: Pull to Open, MAX Super Arm
  • MAX - MX112-B Bracket: Pull to Open, MAX Super Arm, Zinc Plated
  • MAX - MX113 Bracket: Pull to Open, MAX Arm
  • MAX - MX114 Limit Switch Assembly, MAX Arm
  • MAX - MX115 Bracket: Push to Open, MAX Arm
  • MAX - MX116 Bracket: Push to Open, MAX Super Arm 2300
  • MAX - MX117 Key Release for Super Arm 2300 (2W 079 Key Blank)
  • MAX - MX118 Manual Release Gate Operator Key, Max Arm
  • MAX - MX119 Limit Switch Cover for Super Arm 1300 & 2300
  • MAX - MX121 Limit Switch, MAX Arm Ultra
  • MAX - MX125 Manual Release Key, Ultra Arm
  • MAX - MXC-KIT Matrix III connector kit. RPLCMNT CONNECTORS FOR MATRIX III BRDS
  • MAX - MXDSP Control Board, DSP (All Actuators)
  • MAX - MXG70 Gear Reducer; Size 70 900:1; for Pro Series Ops
  • MAX - MXP1 PCB: Slider PRO Upgrade Kit Max 1500 Max 2200 Max F18 Max 1700 FS
  • MAX - MXP2 PCB: Swing PRO Upgrade Kit Megatron 1400 Megatron 2200 Plus Megatron FAST
  • MAX - MXP2 Megatron Pro UPGRADE Kit for Megatron (see details)
  • MAX - MXPRO PCB: Matrix III Control Board for All Pro Series.
  • MAX - MXR Matrix III-Rhino Control Board Assembly
  • MAX - MXR-42 Max Rhino Power Supply Assembly
  • MAX - MXR-G17 Gear Reducer Size 70 17:1, Rhino 4000 Only
  • MAX - MXR-G30 Gear Reducer Size 70 30:1, Rhino 5500
  • MAX - MXR-M1 Brushless DC Motor for the Rhino and Tank
  • MAX - MXR-MC MAC Rhino metal cover (Fits all slide operator models)
  • MAX - MXR-PC MAX Rhino Plastic Cover
  • MAX - MXR-S1 Sprocket 18 tooth sprocket #50 Chain 1" bore
  • MAX - MXR-S3 Idler Sprocket Wheel for MAX Rhino 4000 FS & Rhino 5500.
  • MAX - MXR-S4 Rhino 4000 FS 12 Tooth Size 50 Drive Sprocket
  • MAX - MXR37-1 ID PLUG Rhino 5500
  • MAX - MXSP Manual Release Gate Operator Key, Super Arm 1300
  • MAX - SP01 Cover: Main Cover for Super Arm 2300
  • MAX - SP02 Cover: Back Cover w/ Assembly for Super Arm 2300
  • MAX - Super Arm 1300 Rear Hood (Call for Price) Rear cover for super arm 1300
  • MAX - Super Arm 2300 Rear Cover (Call for Price) Rear Cover for Super Arm
• MMTC, Inc.
  • MMT - KJH22 Reversing Contactor
• Nice Apollo
  • APO - 10002 Screw for stand off
  • APO - 10015290 Gate Attach Bracket (Taco) w/ Hardware
  • APO - 10016215 Control Box Lid For The 1500
  • APO - 10016390 Pigtail, 16" with J1 Plug (Slide)
  • APO - 10020715 Chain Bolt Bracket
  • APO - 10020915 Lock Tab
  • APO - 10021290 bracket
  • APO - 10021490 Magnet Collar Assembly
  • APO - 10021790 Adjustable arm for Vanguard 3501
  • APO - 10024190 Assembly Limit Block for the 3500
  • APO - 10025215 Gate Attach Bracket (Taco) no Hardware
  • APO - 10029290 Upgrade kit for 7000 to a 7200
  • APO - 10030490 Cover, 7100/7300 (Gray)
  • APO - 10037090 Pigtail, 16" with J1 Plug (Smart)
  • APO - 10038315 Bracket Post Mount for 3500
  • APO - 10039790 Sprocket: Quick Release
  • APO - 10040390 Limit Hub Assembly
  • APO - 10049590 Single control box for 3500
  • APO - 10053890 Lid for 7200 Slider
  • APO - 10055090 Retrofit Brackets Only for 1050 Upgrade
  • APO - 10055490 Mounting Hardware Kit for Actuator Arms
  • APO - 10058890 Sublimit Assembly for 3500
  • APO - 10456 Limit Switch Magnetic (Slide)
  • APO - 1050i PCB: 1050i Board, Pre 2016 UL, No Brackets
  • APO - 1050US PCB: Control Board, for single or Dual, UL 2016
  • APO - 11111-B CONTROL BOX ONLY (empty)
  • APO - 1115 Keyswitch w/Key
  • APO - 1119 Push Button
  • APO - 1934G Limit Magnet
  • APO - 2014 12V MOTOR (assy. motor and pinion gear. 816 arm motor)
  • APO - 2017 Spur gear, attached to the main shaft
  • APO - 2018 Main Drive Screw for 816 and 416 Arms
  • APO - 2019 Limit Screw 816/416
  • APO - 20207490 Limit Switch (Includes base) assy. limit block /switch
  • APO - 20208690 Main Screw Kit (includes bearing kit)
  • APO - 20208790 Bearing kit
  • APO - 20208890 Limit assembly kit
  • APO - 2024A Aluminum, cover tube kit for 1550
  • APO - 2025 Seal
  • APO - 2027 Extension Tube (EBS for 816E)
  • APO - 2028 8 FOOT CABLE FOR 416
  • APO - 2040 Cable, Extension for Actuators (per foot 40' max)
  • APO - 20404 Motor Brushes (2) Model 7000 and 7100
  • APO - 2041 Cord Replacement 42FT (816EX/416EX Actuator)
  • APO - 25B24 Limit sprocket Quick Release
  • APO - 30972S Motor: 12VDC (7000/7100)
  • APO - 3398 Rubber Bumper---Gate stop
  • APO - 35B16 Gear Drive Sprockets
  • APO - 35B25 Sprocket: for Quick Release
  • APO - 40B17 Drive Sprocket for Apollo Slide Gate Operators
  • APO - 40BB17H Idler Sprocket (all slide operators)
  • APO - 419 Rubber Boot for Actuator (816E/416E)
  • APO - 433RE PCB: BOARD 433 (REPAIRED)
  • APO - 446 Bolt-on Pivot Arm (816E/416E)
  • APO - 600 Quick Release - For swing gate operators (Includes 1/4in Welded Gate Bracket)
  • APO - 610 Quick Release for slide gate operators
  • APO - 636 PCB: Circuit Board 1600 Dual (NEW)
  • APO - 71020000 Blank Key for the 1115 Key Switch
  • APO - 71020013 Motor Brushes (2)
  • APO - 71020049 Motor Brush Kit (2) Blue 7200/7300 Motor
  • APO - 73090005 Gearmotor assy, 3K series (new style only)
  • APO - 75580000 Microprocessor, 800 Series Board
  • APO - 75590013 Surge Board for Slide Gates and Articulating Arm Operators
  • APO - 75980079 Gate pin with cotter pin 1/2" dia.
  • APO - 76190002 Key stock 1/4 x 1/4 x 1-1/2
  • APO - 816 Actuator, 12 ft cord, No Mounting Hardware
  • APO - 816X Actuator, 42 ft cord, No Mounting Hardware
  • APO - 911 Audible Alarm (UL 325 buzzer)
  • APO - 912L Actuator Titan, 12 ft cord, No Mounting hardware
  • APO - 912LX Actuator Titan, 42 ft cord, No Mounting hardware
  • APO - 936US PCB: Control Board for single or Dual, UL 2016
  • APO - A2002 Brass Block w/ magnet
  • APO - A2003P Limit Block (P) Plastic
  • APO - A2004 Proximity switch
  • APO - A2009 Limit Tower Bushing 816/416 arms
  • APO - A2010 Limit Cap & Seal for 816/416 arms
  • APO - A2011 Gear Housing/Face Face of Bell Housing for 816/416 Arms
  • APO - A2012 Back Housing, 816 (Black)
  • APO - A2029 Strain Relief
  • APO - A2038 Limit Tower Assembly Complete
  • APO - A2058 Cord Replacement 12FT (816E Actuator, 9 wire)
  • APO - A2072 (20207299) Speed Sensor for 416 or 816 Arm
  • APO - ABOX35 Arm assy for 3501
  • APO - BAT12V33 Battery, 35 AMP Sealed Lead Acid (AC Recharge Only)
  • APO - EIB Encoder Interface Baord
  • APO - HY7012 NH Hyppo Motor
  • APO - MB1050 (Previously MB1K) Plastic Control Housing w/ Board and Batteries
  • APO - NAKM001 Motor Kit 1cv Operators 4500/8500
  • APO - NAKM002 Motor Kit, 1/2HP for 4300/4500
  • APO - NCO-PWRSUP Power Supply F/NCO
  • APO - NTK1008 ( Key Stamp On Key Says N1008 )
  • APO - NTK1010 Keys, Set, #10 F/Nice Operators
  • APO - PRTO 05 LIMIT SWITCH FOR TOONA MODLES
  • APO - REPACT Actuator Repair
  • APO - REPBRD PCB: Control Board Repair Charge (if repairable)
  • APO - SB336A Filter Power Supply
  • APO - SPAMG039B00 Motor Gearbox, 1/2HP & 1HP Motor
  • APO - SPAMG089A00 Transmission Reducer w/ Mnt Plate, Release Mech, Limit Bolts
  • APO - SPBAR0001 old pn = 20000145 Arm Hub Assembly for M3/M5/LBAR
  • APO - SPEG019B00A Power Supply Assembly w/Transformer
  • APO - SPLSM00201 Quick Release Gearbox
  • APO - SPLSM00300 Limit Switch Arms (set) for 4300/4500
  • APO - SPMTG02900 M7Bar Motor Assembly, w/ Worm Gear and Harnesses
  • APO - SPSWLSM-01 Limit Assembly for Titan Actuator
  • APO - T0707012 Toona 7 Arm only
  • APO - TB585A M/L Bar Encoder Board
  • APO - UCFL202 Flange Bearing for 7100
• PowerMaster/C.S.E., Inc.
  • JCG - 70220 Capacitor 70 MFD 220 VAC
  • JGC - 57-00001 Capacitor 70 MFD Dry Film
  • JGC - 60-00005 Motor: 1/2HP Limited Duty
  • JGC - 60-00051 Motor: 1/2 HP for "H" Series 115 VAC 1 Phase
  • JGC - H Shaft Kit Parts for "H" Shaft
• Ramset Automatic Gate Systems
  • RAM - 75-72 Limit Shaft Assembly for RAM 100
  • RAM - 800-02-01 Gearbox: Ratio 40:1 for RAM-2000 Overhead
  • RAM - 800-02-51 Gear Reducer,: Size 60, Ratio 40:1, C-Face, RAM 1000/5500
  • RAM - 800-06-08 Limit shaft sprocket - 41B12 x 1/2"
  • RAM - 800-14-15 Cover, Polyethylene Cap Arm
  • RAM - 800-20-00 Limit Switch for RAM 100
  • RAM - 800-20-20 Foot pedal switch for Ram 100
  • RAM - 800-28-40 Pivot Arm Release (R30, R300)
  • RAM - 800-44-03 Bearing: Sealed, 7512DLG (QJZ2K) 3/4"
  • RAM - 800-48-04 Cam Limit, 3/4" for Ram 30 Swing Operator
  • RAM - 800-60-00 Transformer: 120/240V to 18VAC—40VA
  • RAM - 800-70-11 Limit Shaft Collar, 3/4" for Ram 30 1/2HP Swing Op
  • RAM - 800-75-00 Arm Assembly
  • RAM - 800-75-20 Clutch Release Assembly for R100
  • RAM - 800-75-30 Idler Wheel Assembly for R100
  • RAM - 800-75-40 Torque Limited Assembly (R30)
  • RAM - 800-75-60 Chain Release Assembly for RAM 50/5000
• Securitron Magnalock Corp./ Assa Abloy
  • SE2 - EMH-BK Electromechanical Handle
  • SE2 - TM9 Time Mate Timer (relay hold timer)
• Torxun Inc
  • TOR - 70217360 Rectifier for Model 3 Operator
  • TOR - M10S.0021 Motor / Gearbox (GT20)
• USAutomatic
  • USA - 020570 Ranger Control Box, Plastic Box Only
  • USA - 060520-2 (discontinued) PCB: PATRIOT Board, 2016 UL325 Version
  • USA - 500016 PCB: PATRIOT Board
  • USA - 500018 PCB: Control Board for Patriot-Red
  • USA - 500026 PCB: Patriot RSL Control Board
  • USA - 500027 PCB: Ranger HD Control Board - Red
  • USA - 510001 Patriot Actuator with 8ft cable and connector (new replacement)
  • USA - 510010 Acme screw assembly (Patriot Actuator)
  • USA - 510020 Cover Tube Assy - Patriot
  • USA - 510101 Patriot Actuator Gasket
  • USA - 510103 Patriot Actuator Limit Switch Assy.
  • USA - 510109 Motor: 12VDC
  • USA - 510201 Motor: for RSL slide gate operator
  • USA - 520000 A/C Kit; Charge Controller, Harness, Transformer
  • USA - 520004 (discontinued after Inv. sold)Transformer: 18 volt, use with 520006
  • USA - 530015 Secondary Entrapment Siren
  • USA - 580060 chain roller for an RSL: Delron Idler Roller Assembly
  • USA - 590030 Patriot RSL emergency release access cover
  • USA - 590050 Limit switch for RSL
  • USA - 590057 Patriot RSL Limit Nut Kit
  • USA - 590070 Patriot RSL Limit Switch Plate Assembly
  • USA - 600020 Complete Swing Cabinet w/ stand offs
  • USA - 602020 Metal Cabinet Cover for Patriot Swing Operator
  • USA - 610102 Actuator Mounting Tube (all operators)
  • USA - 610105 Ranger 500 Gate Bracket - 2 inch
  • USA - 610107 Patriot & Ranger HD Gate Bracket - 6 inch
  • USA - 610201 Gate drive shaft for US Automatic RSL
  • USA - 610420 Ranger 500 Actuator Mounting Tube
  • USA - 610425 Actuator Support Bracket
  • USA - 610512 3/8" x 3" SAE Shoulder Bolt
  • USA - 610516 3/8" SAE Flat Washer
  • USA - 610518 3/8" SAE Nylon Insert Lock Nut
  • USA - 610529 Washer: Nylon
  • USA - 610530 Bushing: Bronze for all operators
  • USA - 620010 Quick release pin
  • USA - 620011 Manual Release Clip (all operators)
  • USA - 620114 Hardware Assy (does not include 2X2 tube) 610101
  • USA - 620119 Ranger 500 Hardware Assembly Gate
  • USA - 630007 Wiring Harness for Patriot (includes all connectors, 8 feet)
  • USA - 630041 Quick Connect Plug and Go Harness w/20 amp Fuse
  • USA - 630100 Harness: Charge controller to battery
• Viking Access Systems
  • VIK - DNXTS10 Manual Release Sensor for the Q7NX
  • VIK - DSIB10 Idler Bushing with Bolt.
  • VIK - DSIP10 Idler pulley
  • VIK - DUAL10 Alarm Buzzer
  • VIK - DUEMI10 EMI Board (AC power filter board)
  • VIK - DUFUSKT Viking Fuse Kit: 3A, 4A, 15A
  • VIK - DULS10 Limit switch for the K2, L3, H10 & F1 T21 - Sold as set of 2
  • VIK - DULSG limit switch gear box for the K2, L3 and H10
  • VIK - DUMRS10 Power Switch
  • VIK - DUMRS20 Battery Switch
  • VIK - DUMSCB10 PCB: Control Board: Dual (GateTor)
  • VIK - DUMSCB10 - I8 PCB: Control Board: Dual, (GateTor) I8
  • VIK - DUPCB10 PCB: Control Board: Single (GateTor)
  • VIK - DUPCB10-R6 PCB: Control Board: 1st gen - R6
  • VIK - DUPHC Pwer Harness for L-3
  • VIK - DWAR10 Output Arm T-Bar, Early Version (R6, F1 Pre-Nov 09)
  • VIK - DWAR20 Output Arm Straight-Bar, Current Version (R6, F1, T21 Pre-Nov 09)
  • VIK - DWCA10 Chain: #40, 10 ft length, 46 pitches (links) for F1NX Operator.
  • VIK - DWCL20 Clutch and Handle Set
  • VIK - DWCO10 Operator cover
  • VIK - DWGB70 Worm Gear #70 10:1 for F1
  • VIK - DWLC10 Limit cam and holder
  • VIK - DWLH10 T21 Limit Switch Holder
  • VIK - DWMO10 Motor: for the F1
  • VIK - DWOC20 Output shaft cover
  • VIK - DWOP20 Output Shaft (current rev)
  • VIK - DWOUK10 Output Shaft Knob
  • VIK - ECUKEY20 Key for ECUS/ECUMS Cabinet Lock
  • VIK - ECURW RESET SWITCH
  • VIK - F1ARM20 Arm Assembly (current version)
  • VIK - F1SP10 Sprocket, Gearbox for R6NX
  • VIK - FA-104573 Motor: Motor/Gearbox Assembly - X390
  • VIK - FA-390682 Limit Switch and Cam
  • VIK - FA-7387051 X390 Articulated Arm, Steel
  • VIK - FAX390C Limit Switch Cover
  • VIK - FAX390P Limit Plate
  • VIK - G5KR Key release for viking G5 Arm
  • VIK - G5PSE Positive stop collar for the G5
  • VIK - G5PSE G-5 Positive Stop
  • VIK - H10CB10-H10 H-10 Control Board
  • VIK - HUSIGEMISL EMI Communication Cable - SL
  • VIK - HUSIGEMISW EMI Communication Cable - SW
  • VIK - I8BB I-8 Ball Bearing
  • VIK - I8CV Cover for I8 in-ground unit
  • VIK - I8CVHW Cover holder hardware for I8
  • VIK - I8GATT I-8 Gate Attachment
  • VIK - I8IDRAM I-8 Intermediate Drive Arm
  • VIK - I8LCKMN I-8 Manual Rlease Mechanism
  • VIK - I8MNRKY I-8 Manual Release Key
  • VIK - I8PDRAM I-8 Primary Drive Arm
  • VIK - I8PGF I-8 Plastic Gap Filler
  • VIK - I8PSHO I-8 Positive Stop Hardware Open
  • VIK - I8SDA I-8 Secondary Drive Arm
  • VIK - L3LC10 limit cam for the K2, L3 and H10 - set of 2
  • VIK - L3LH10 limit switch holder for the K2, L3 and H10
  • VIK - Q7GB70 Q7 Gear Box
  • VIK - R6GB60 Gear Box: R6
  • VIK - R6LH10 Limit switch holder
  • VIK - R6OPS20 Output shaft for new generation R6
  • VIK - SOCHR10 Solar Charger 10 Amp
  • VIK - SOHAR Solar Harness and connectors
  • VIK - T21CH50 #50 Drive chain for the T21 gearbox
  • VIK - T21GB80 Gear Box T21 New Gen
  • VIK - T21LH Bracket: Limit Switch Bracket
  • VIK - T21OP20 Output Shaft for T21, T21NX
  • VIK - T21SP2034 Drive Sprocket, Gearbox, T21
  • VIK - VA-ECUBBB Big Box Cabinet Chassis w/Access Door & Back Box for G5
  • VIK - VA-ECUD2 ECU Dual Controller for Kits
  • VIK - VA-ECUS2 ECU Single Controller for Kits
  • VIK - VA-HEATER 110 Volt Kit for all viking operators
  • VIK - VABFH Battery Fuse Holder
  • VIK - VAF1MO Motor: DC Motor for F1 Operator
  • VIK - VAF1PHA Older Version F1 Power Harness
  • VIK - VAG5 Unit, Motor
  • VIK - VAG5CGH22M Carrier with hardware (4 Star, Pre-NX Version)
  • VIK - VAG5CLS Cover: Lead Screw Cover
  • VIK - VAG5CT Cover, Terminal G-5
  • VIK - VAG5DA NC6LUXSA/Door, Access
  • VIK - VAG5DBI Dust Brushes for G5 (1pair)
  • VIK - VAG5ECC End Cap, Lead Screw Cover
  • VIK - VAG5KC Key Cylinder for the G5
  • VIK - VAG5KR Release key for the Viking G5 arm
  • VIK - VAG5LB Limit switch bar
  • VIK - VAG5LS Limit switch for G-5 (set of 2)
  • VIK - VAG5LSB G5 Limit switch bracket SET of 2 (Classic G5 not for NX)
  • VIK - VAG5MBF22M Mounting Bracket, Front, G5 (22mm)
  • VIK - VAG5MHB Back Mounting Hardward
  • VIK - VAG5SLS Stainless Lead Screw
  • VIK - VAG5TSTC Thumb screws
  • VIK - VAH10MO Motor: H-10, 24VDC, 1 HP
  • VIK - VAK2LSWH Limit Switch Harness K2
  • VIK - VAK2MO Motor: for 1st Gen K2 operator
  • VIK - VAL3CH10 H10 Chassis
  • VIK - VAL3CHAP L3 Chassis Adaptor Plate
  • VIK - VAL3CO20 Cover: For H10 Operator
  • VIK - VAL3CO20 Cover for Viking L3 Gate Operator.
  • VIK - VAL3LSWH Limit Switch Harness for H10 Operator
  • VIK - VAL3MO Motor: for the L3
  • VIK - VAL3SP17 Sprocket: Chain Drive
  • VIK - VAL3SP20 Sprocket: Chain Drive, 20 tooth, L3
  • VIK - VALSWH Limit Switch Harness
  • VIK - VAMOBK Brush Kit for H10 / T21 Motor
  • VIK - VAQ7CHCG10 Q7 Chassis Chain Guard
  • VIK - VAQ7MBK Brush Kit for Q7
  • VIK - VAQ7PH Power harness for Q7
  • VIK - VAR6MO Motor: 24VDC Motor for R6 Swing Operator
  • VIK - VAR6MO-1 Motor/Gearbox Assy (1st Gen Rev1 for R6)
  • VIK - VASP1034 Sprocket: Motor
  • VIK - VASP3034 Gearbox Drive Sprocket for F1NX
  • VIK - VASWCB F1 Cover Screws (Set of 2)
  • VIK - VAT21MO Motor: for the T21 gate operator
  • VIK - VAWRCK20 Clutch Key (latest revision) Thicker version 5/16"
  • VIK - VAX9 Motor: Motor/Gearbox Assembly - X9
  • VIK - VAX9AA Complete Arm Assbly for X9
  • VIK - VAX9KR Manual release key for X9
  • VIK - VAX9LCS Limit Cam & Holder - X9
  • VIK - VAX9PC Motor Cover for X9
  • VIK - VAX9PSE Positive Stop Extension for X9
  • VIK - VE4PCB PCB: Control Board: E4
  • VIK - VECUMCM Motor Connector, G5, Master
  • VIK - VECUMCMGT Motor Connector Master Slave, First Gen
  • VIK - VECUMSC Cable: Master/Slave Comm Cable, Dual Controller Only
  • VIK - VECUSPH Power Harness for Next Gen. ECU, ECUBE Including Solar.
  • VIK - VFLEXPCB PCB: Control Board: VFLEX, Pre-UL16
  • VIK - VFLEXPCB-H10 PCB: Control Board: VFLEX, Pre-UL16, H10
  • VIK - VFLEXPCBU16 PCB: Control Board: VFLEX, UL16
  • VIK - VFLEXPCBU16-H10 PCB: Control Board, VFLEX, UL16, H10
  • VIK - VFLEXPCBU16-Q7 PCB: Control Board, VFLEX, UL16, Q7
  • VIK - VFLEXPCBU18 PCB: Control Board: VFLEX, UL18
  • VIK - VFLEXPCBU18-H10 PCB: Control Board, VFLEX, UL18, H10
  • VIK - VFLEXSM PCB: Control Board: VFLEX, Dual Module, Pre-UL16
  • VIK - VFLEXSMU16 PCB: Control Board: VFLEX, Dual Module, UL16
  • VIK - VFLEXSMU18 PCB: Control Board: VFLEX, Dual Module, UL18
  • VIK - VG5LSH Limit Switch Harness for G5 Operator
  • VIK - VG5MOC Motor Coupler for G5 Operator
  • VIK - VK2CH10 Aluminum Chassi for K2 or old L3
  • VIK - VNXCV Cover: for L3NX Operator
  • VIK - VNXDUARS Alarm Reset Switch
  • VIK - VNXEFHH EMI Fuse Holder & Harness for T21
  • VIK - VNXF15A Fuse: 15 Amp
  • VIK - VNXF1CH Chassis for F1NX
  • VIK - VNXF1CV Cover: Viking F1NX
  • VIK - VNXF1LSH Limit Switch Harness
  • VIK - VNXF20A Fuse: 20 Amp
  • VIK - VNXF4A Fuse: 4 Amp
  • VIK - VNXG5C78 Carrier with Hardware, (5 star- NX Version)
  • VIK - VNXG5CL Lower Motor Casing, G5NX Version
  • VIK - VNXG5CLS Cover, Lead Screw for G5NX
  • VIK - VNXG5CT Cover, Terminal G5NX
  • VIK - VNXG5DB Dust Brush (2 Qty.) for G5NX
  • VIK - VNXG5DCR Door, Cover Release G5NX
  • VIK - VNXG5ECC End Cap, Lead Screw Cover for G5NX
  • VIK - VNXG5K Key, Cover Release G5 New Generation.
  • VIK - VNXG5LDSW Lead screw w/ coupler
  • VIK - VNXG5LSB Limit switch bracket G5NX (Pair)
  • VIK - VNXG5MBB Mounting Bracket, Back, G5
  • VIK - VNXG5MBF78 G5 NX Front Mounting Bracket
  • VIK - VNXG5MBF78 Mounting Bracket - Front for 2nd Gen G5NX
  • VIK - VNXG5MO Motor: 24VDC for G5NX
  • VIK - VNXH10MH Motor Harness for H10NX
  • VIK - VNXH10MO Motor: for H10 2nd gen Slide Gate Operator
  • VIK - VNXK2CV Operator Cover for K2 NX
  • VIK - VNXK2GB Gear Box K2
  • VIK - VNXK2MH Motor Harness for K2
  • VIK - VNXK2MO Motor: 24 VDC, K2NX
  • VIK - VNXK2PH Power harness for K2NX
  • VIK - VNXK2PSPA Power Supply Panel Assembly
  • VIK - VNXL3CH Chassis for H10 & L3 Operator
  • VIK - VNXL3GB Gear Box
  • VIK - VNXL3MH L3 MOTOR HARNESS
  • VIK - VNXL3MO Motor: for Viking L3NX
  • VIK - VNXL3PH L3 Power Harness
  • VIK - VNXMPB Modular Power Box Assembly
  • VIK - VNXR6PSPA Power Supply Panel Assembly
  • VIK - VNXSLCL / ECUKEYC20 Key and Camlock, ECU Boxes and Slide operator Cover (NX)
  • VIK - VNXSLEPS2 Electronic Positioning Sensor 2
  • VIK - VNXSWOSC Output Shaft Cover T-21 and F1
  • VIK - VNXSWPH Power Harness for F1NX Swing Gate Operator
  • VIK - VNXUPBPA Power-Box Panel Assembly (front board only)
  • VIK - VSCHARGECU Solar charger for ECU type control box
  • VIK - VSCHARGSL Solar charger for slider model
  • VIK - VSCHARGSW CHARGE CONTROLLER 3 AMP - R6S
  • VIK - VSK2MO Motor: Solar K2 Pre UL, UL16, UL18, K2 SPS Ops
  • VIK - VSPCB PCB: Control Board: VFLEX, Pre-UL, Solar
  • VIK - VSPCBU16 PCB: Control Board: VFLEX, UL16, Solar
  • VIK - VSPCBU18 PCB: Control Board: VFLEX, UL18, Solar
  • VIK - VSSMPCB PCB: Control Board: VFLEX, Dual Module, Pre-UL16, Solar
  • VIK - VSSMPCBU18 PCB: Control Board: VFLEX, Dual Module, Solar
  • VIK - VSTBAECU Terminal Block Assembly
  • VIK - VWEMICC EMI communication cable
  • VIK - X9LS Set of 2 Limit Switch for X9 and G5
  • VIK - X9PC Plastic Cover for X9 Operator
  • VIK - X9PS Post mount kit for X9
  • VIK- I8GMA I-8 Motor Gear Assembly