Products

Hardware

Back to Main Listing

Access Products USA
- APU - AP-CZ Maglock: Weldable CZ bracket
- APU - AP-RA-1 Reflector: Warning, Single, Amber
- APU - AP-RR-1 Reflector: Warning, Single, Red
- APU - AP-WB Maglock: Replacement Armature Welding Bracket
- APU - AP-WRA-3 Reflector: Warning, Triple, Amber
- APU - AP-WRR-3 Reflector: Warning, Triple, Red
- APU - AP-Z Maglock: Weldable Z bracket
ADI
- ADI - VE-GNP Gooseneck Ped. for Drive-Up Communications, Black
- ADI - VE-GNP-2 Viking Electronics VE-GNP-2 Floor Mount HD Pwdr Painted, Steel Blk
Advanced Designs, Inc.
- ADV - Clip Ring Clip Ring for Cantilever Roller Shaft (2 req. per shaft)
- ADV - RD CANTWHEELS w/ Bearings Cantilever Wheel: Round replacement w/ Bearings
- ADV - SS Shaft Stainless Steel Shaft for Cant Wheel Assembly
AES Global
- AES - IBK-KEY Keys: Set of Two for IB Range Intercom.
Alarm Lock Corporation
- ALR - DL5200/26D Lockset: Trilogy Dual Sided lock
- ALR - ETDL2700/26D Lockset: Trilogy T2 Exit Bar Trim, US26D, lever
- ALR - PL6100 Lockset: Network Cylindrical Prox Lock
- ALR - Unused item Lockset:
- ALR- DL2700WP/26D Lockset: Trilogy Single Sided, Standalone Digital Cylindrical Lock
All-O-Matic Inc
- AOM - 10 Jamb Track: Lower Pivot Pin - Tapered
- AOM - 11 Jamb Track: Lower Pivot Pin Retaining Clip
- AOM - 12 Jamb Track: Lower Pivot Bracket
- AOM - 12 (5 inch) Bracket: Lower Pivot for 5 inch Jamb Track Only
- AOM - 13 Jamb Track: Kicker Roller Bracket
- AOM - 15A Jamb Track: Kicker Roller, Smooth Shaft, SS-3 and SL-3
- AOM - 15B Jamb Track: Kicker Roller, Threaded Shaft, SJ-4, HJ-5 and HJL-5
- AOM - 17 Jamb Track: Bracket For Jamb Track Roller
- AOM - 19A Jamb Track: 3" Roller w/ Shaft
- AOM - 1L-35 Jamb Track: Power Arm, Left Short. Used on SS-3
- AOM - 1L-38 Jamb Track: Left Power Arm for SL-3, SJ-4 and HJ-5
- AOM - 1L-44 Jamb Track: Power Arm, Left, Long, Used on HD long 5" Hdw.
- AOM - 1R-35 Jamb Track: Power Arm, Right Short. Used on SS-3
- AOM - 1R-38 Jamb Track: Right Power Arm for SL-3, SJ-4 and HJ-5
- AOM - 1R-44 Jamb Track: Power Arm, Right, Long, Used on HD long 5" Hdw.
- AOM - 21-34 Jamb Track: Main Spring Bracket 3" and 4" Springs
- AOM - 22-345 Jamb Track: Main Spring Bracket Hardware, Nut and Bolt Set
- AOM - 23-5 Jamb Track: Connecting Link used on 5" Spring
- AOM - 30-AC Jamb Track: 3" Spring Assy.
- AOM - 30-BC Jamb Track: 4" Spring Assy.
- AOM - 30-CC Jamb Track: 5" Spring Assy.
- AOM - 32-33 Jamb Track: Adj Bolt, 1/2-12" for 3" & 4" Spring Set
- AOM - 32-33A Jamb Track: Adj Bolt 5/8-12", for 5" Spring Set
- AOM - 32-33AL Jamb Track: Adj Bolt 5/8-18", for 5" Spring Long Set
- AOM - 32-33L Jamb Track: Adj Bolt, 1/2-18", for 3" & 4" Spring Long Set
- AOM - 40BLK CL 40ML Chain: Master Link, #40
- AOM - 40BLK X 10 4010 Chain: 10 Ft Box #40 Black Roller Chain
- AOM - 40BLK X 100 40100 Chain: 100 Ft Roll # 40 Black Roller Chain
- AOM - 40NP CL 40NPML Chain: Master Link, #40 Nickel Plated
- AOM - 40NP X 10 40NP10 Chain: #40 Nickel Plated 10 feet
- AOM - 40RF X 10 Chain: #40, 10ft Coated (Dacromet)
- AOM - 40SS CL 40SSML Chain: Master Link, #40 SS
- AOM - 40SS X 10 40SS10 Chain: 10 Ft Box #40 SS Roller Chain
- AOM - 41BLK CL 41ML Chain: Master Link, #41, Black
- AOM - 41BLK X 10 4110 Chain: 10 Foot Roll # 41 Black Roller Chain
- AOM - 41BLK X 100 41100 Chain: 100 Foot Roll # 41 Black Roller Chain
- AOM - 41RF X 10 Chain: #41, 10ft Coated (Dacromet)
- AOM - 41SS CL 41SSML Chain: Master Link, #41 SS
- AOM - 41SS X 10 41SS10 Chain: 10 Ft Box #41 SS Roller Chain
- AOM - 4L-4 Jamb Track: Bracket Left Main Pivot Bracket, 4 in.
- AOM - 4L-5 Jamb Track: Bracket Left Main Pivot Bracket, 5 in.
- AOM - 4R-3 Jamb Track: Right Main Pivot Bracket for 3"
- AOM - 4R-5 Jamb Track: Right Main Pivot Bracket for 5"
- AOM - 5 Jamb Track: Bushing, Outer Thrust
- AOM - 50BLK CL 50ML Chain: Master Link, #50
- AOM - 50BLK X 10 5010 Chain: 10 Foot # 50 Black Roller Chain
- AOM - 50BLK X 100 50100 Chain: 100 Foot Roll # 50 Black Roller Chain
- AOM - 50NP X 10 50NP10 Chain: 10 Ft # 50 Nickel Plated Chain
- AOM - 50NP X 100 50NP100 Chain: 100 Foot Roll # 50 Nickel Plated Chain
- AOM - 50NPML Chain: Master Link, #50 Nickel Plated
- AOM - 50RF X 10 Chain: #50, 10ft coated (Dacromet)
- AOM - 9 Jamb Track: Lower Pivot Bushing
- AOM - ABT-200 Jamb Track: Adjusting Bracket Set
- AOM - AGN-GN1-72 Gooseneck Post, In-Ground 72"
- AOM - AGN-SM1-42 Gooseneck Post, Surface Mount 42"
- AOM - AML-1200B Maglock: 1200 lbs, Lock Kit Inc. Lock, Brkts & Pwr Supply
- AOM - AVW-450 V-Groove Wheel: 4", 1/2" Axle
- AOM - AVW-665 V-Groove Wheel: 6", 5/8" Axel
- AOM - AWMB-4 V-Groove Wheel: Box, 4" (Housing)
- AOM - AWMB-6 V-Groove Wheel: Box, 6" (Housing)
- AOM - AWP4-B V-Groove Wheel: UHMW, 4" w/Bearing
- AOM - BRG-205-F16 Bearing: Flange Bearing for TK-100
- AOM - BRG-207F Bearing: Drive Shaft for SW-300'SW-350, 1 1/4" Flange
- AOM - Dual-GR Adjustable Dual Gate Rollers
- AOM - EIR-200 Jamb Track: Overhead End Plastic Idler w/ Shaft
- AOM - GH-1500 Hinge: Steel, 1-Pair, 1,500 lbs each, w/ grease zerk fitting
- AOM - GH-5000 Hinge: Heavy Duty, 5,000 lbs.
- AOM - GRB-12B-BR Guide Roller: 12", Black, with bracket
- AOM - GRB-3B-BR Guide Roller: 3", Black, with bracket
- AOM - GRB-6B-BR Guide Roller: 6", Black, with bracket
- AOM - GRB-UL6 Guide Roller: 6", Black, Covered
- AOM - GRW-12B-BR Guide Roller: 12", White, with bracket
- AOM - GRW-6B-BR Guide Roller: 6", White, with bracket
- AOM - HJ-5 Jamb Track: Complete Heavy Jumbo 5" Set
- AOM - HJL-5 Jamb Track: Complete Heavy Jumbo Long Set
- AOM - HWW-HJ5 Jamb Track: Hdw Set, 5" Heavy Jumbo Set (No Springs or Track)
- AOM - K217-300 ACCESS DOOR KEY
- AOM - SJ-4 Jamb Track: Complete Jumbo set, 4"
- AOM - SJL-4 Jamb Track: Complete 4" Hardware Set, Long
- AOM - SS-3 Jamb Track: Complete Standard Set Jamb Track Hardware
- AOM - TK-1000 Tandem Gate Kit
- AOM - TK-2000 Tandem Gate Kit, #50 Chain
- COM - CGS-MP-ADP Jack shaft adaptor for chain drive operator, bolt-on
Ameriline Mfg. & Dist
- AML - EXJ550-5-007 Lower Pivot Pin And Clip
- AML - EXJ550-5-008 Bracket: Lower Pivot Bracket
- AML - EXJ550-5-017 12"X5/8" Spring Adjustment Bolt with Washer
- AML - J350-4-010 Track Roller, Shaft, Clips (Assembled)
- AML - J350-4-020 4" Spring Complete (Items # 013,015,017,018,019,020)
- AML - J550-5-019 5" Spring Complete (Items # 013,014,015,016,017,018)
- AML - SL350-3-021 3" Spring Complete
BEA, Inc.
- BEA - 35.1242 Harness: For LZRH100
- BEA - FSSMB Bracket: Bracket for 10LZRFLATSCAN-S
- BEA - INDBRACKET Bracket: Industrial Mounting Bracket
- BEA - LBA Bracket: Mounting Bracket for LZR s600, i30 and LZR-H100.
- BEA - LHB Housing Bracket for LZRH100
- BEA - MINIBRACKET Bracket: Short, Adjustable Mounting Bracket.
BFT - Somfy Systems, INC
- BFT - IB-KEY Key: for Cellular Callbox
CellGate dba CelAccess Systems, Inc.
- CEL - OP-EPM EXT L-BRK ANT Antenna: EPM antenna 3 meters with L-bracket
Comunello
- COM - 202 Gate Stop, Galvanized, 4-3/4" high, Bolt on
- COM - 239 Gate Leaf Stopper, Rubber
- COM - 255-220-C Guide Roller Assy, Medium duty, for up to 2-3/8" Gate frame
- COM - 256-220 Guide Roller Assy, Heavy duty, for up to 3-1/8" gate frame
- COM - 256-300 Guide Roller Assy, Heavy duty for up to 4-3/4" gate frame
- COM - 289G-19.68FT Track, Half Round, Galv., Smooth, For Ranger System
- COM - 289G-9.84FT Track, Half Round, Galv., Smooth, For Ranger System
- COM - 291 Connection Pin for Item 289
- COM - 335V-100 V-Groove Wheel: 4" Recessed Mount
- COM - 336V-160 V-Groove Wheel: 6" Recessed mount
- COM - 85L-G Upper Hinge, Adjustable, Bolt On, 2-11/16", Galvanized
- COM - 85PST-G Upper Hinge, Adjustable, Screw On, 2-11/16" dia, 4 hole, Galvanized
- COM - 87PST-G Bottom hinge w/Thrust Bearing, Screw On, 2-11/16" dia., Galvanized
- COM - ABS-10 Hinge-to-Post Connector Tube, 50mm x 9'10"L for Albatros Linkage
- COM - ABS-100 Albatros Power Transfer Kit for Bi-Part gates
- COM - ABS-15G Ground Strike Plate, for Left or Right, for Albatros, w/Catch Pin
- COM - CG-05G Foundation Plate, Grande, Galv
- COM - CG-05P Foundation Plate, Piccolo, Galv
- COM - CG-15G Adjustable Mounting Brkt, Grande
- COM - CG-15M Adjustable Mounting Brkt, Mini
- COM - CG-15P Adjustable Mounting Brkt, Piccolo
- COM - CG-252 Side Mount Single Roller Guide (Upper Guide)
- COM - CG-254 Guide Rail 10 foot (U-Channel) for Single Roller Guide
- COM - CG-30G Gate Receiver, Grande, (Fits gate frame size 4" - 6")
- COM - CG-30M Gate Receiver, Mini, (Fits gate frame size 2" - 3")
- COM - CG-30P Gate Receiver, Piccolo, (Fits gate frame size 3-3/8" - 4-1/2")
- COM - CG-348-M16 Tie rod (J-Bolt), M16
- COM - CG-348-M20 Tie rod (J-Bolt), M20
- COM - CG-50G Gear Rack, 3.3FT, w/Mounting Screws, for Grande Integrator Model, Galvanized
- COM - CG-50M Gear Rack, 4.92FT, w/Mounting Screws, for Mini Integrator Model, Galvanized
- COM - CG-50P Gear Rack, 4.92FT w/Mounting Screws, for Piccolo Integrator Model, Galvanized
- COM - CG-55G Rack Installation centering tool, for size Grande
- COM - CG-55M Rack Installation centering tool, for size Mini
- COM - CG-55P Rack Installation centering tool, for size Piccolo
- COM - CG-58 Integrator Drive Shaft Coupling, Comunello Mini & Piccolo
- COM - CG-58-FAAC844 Integrator Drive Shaft Coupling, Comunello Mini & Piccolo
- COM - CG-58G-FAAC844 Integrator Drive Shaft Coupling, Comunello, Grande Model
- COM - CGA-345P-19.68F ALUMINUM, Bottom Track, 345P, 19'-8", Large
- COM - CGA-345P-9.84FT ALUMINUM, Bottom Track, 345P, 9'-10", Large
- COM - CGA-350.5P ALUMINUM, Carriage, Large, 5 Nylon wheels, Monoblock
- COM - CGI-40 Tension Bar Assembly
- COM - CGI-40-2IN Tension Bar Assembly, 2" TS or 2-3/8" Fence pipe
- COM - CGS-245M-19.68FT Bottom Track Size Mini, 19'8" Long, Galv
- COM - CGS-245M-6.6FT Bottom Track Size Mini, 6'6" Long, Galv
- COM - CGS-245M-9.84FT Bottom Track Size Mini, 9'10" Long, Galv
- COM - CGS-250.8M Carriage, Mini, 8 Wheel, Multiplate
- COM - CGS-345G-19.68F Bottom Track size Grande, 19'8" Long, Galv
- COM - CGS-345G-9.84FT Bottom Track Size Grande, 9'10" Long, Galv
- COM - CGS-345P-19.68F Bottom Track Size Piccolo, 19'8" Long, Galv
- COM - CGS-345P-9.84FT Bottom Track Size Piccolo, 9'-10", Galv
- COM - CGS-345XL-9.8F Bottom Track Size XL, 9'10" Long, Galv
- COM - CGS-346G Bottom End Cup for CGS-345G Grande Track, Galvanized
- COM - CGS-346M Bottom End Cup for CGS-245M Small Track, Galvanized
- COM - CGS-346P Bottom End Cup for CGS-245P/345P Large Track, Galvanized
- COM - CGS-346XL Bottom End Cup for CGS-345XL Extra Large Track, Galvanized
- COM - CGS-347G End Wheel for CGS-345G Grande Track, Galvanized
- COM - CGS-347M End Wheel for CGS-245M Small Track, Galvanized
- COM - CGS-347P End Wheel for CGS-245P/345P Large Track, Galvanized
- COM - CGS-347XL End Wheel for CGS-345XL Extra Large Track, Galvanized
- COM - CGS-350.5XL Carriage, Extra Large, 5 Wheel, Monoblock
- COM - CGS-350.8G Carriage, Grande, 8 Wheel, Monoblock
- COM - CGS-350.8P Carriage, Piccolo, 8 Wheel, Monoblock
- COM - CGS-500.8G Integrator Carriage Kit, size Grande, two carriage set
- COM - CGS-500.8M Integrator Carriage Kit, size Mini, two carriage set
- COM - CGS-500.8P Integrator Carriage Kit, size Piccolo, two carriage set
- COM - P1904010-A Accessory Box for Kit 150, NO TRACK
- COM - Ranger Kit (Q23114327) Telescoping Gate Hardware Package
- COM - RG-10P Ranger Track Installation Guide
- COM - RG-15 Brush Kit for RG-30 Track
- COM - RG-262 Ranger Gear Rack, Galv, 1-1/4" x 1/2", 3'.3"
- COM - RG-264 Gear Rack Connector (weld on standoff)
- COM - RG-30P Track, Geared for Ranger System, Galv., 6.6'
- COM - RG2-120.50 Ranger Kit, 2 leaf, 880lbs/leaf, track sold separate.
- COM - RG3-120.50 Ranger Kit, 3 leaf, 440lbs/leaf, track sold separate.
- COM - RG3-120.50 Copy of Ranger Kit, 3 leaf, 440lbs/leaf, track sold separate.
D & D Technologies (Shut It)
- DND - 74001313T Hinge: SureClose Ready-Fit, AL Screw-on, Hinge only
- DND - 74001315T Sureclose - Plain pivoting hinge
- DND - 7403 SureClose Gate Stop
- DND - 74108313T Hinge: SureClose Ready-Fit, AL Screw-on, Self Close, Safety
- DND - 74108323T Hinge: SureClose Ready-Fit, AL Screw-on, Self Close, Safety
- DND - 74108325T Hinge: SureClose Ready-Fit, Steel, Self Close, Safety
- DND - 75001113 Hinge: Non Self-Closing Hinge SM S
- DND - 75001114 Hinge: SureClose, SM W, Center Mnt w/ Steel Bracket
- DND - 75001213 Hinge: SureClose, Flush Mount, AL Screw-on, Hinge only
- DND - 75001214 Hinge: SureClose, Flush Mount, Steel Weld-on, Hinge only
- DND - 75057114M Hinge: SureClose, 57W, Self-Close, Center Mnt w/Steel Bracket
- DND - 75057224M Hinge: SureClose 57 AT90 W, Flush Mnt Self Closing
- DND - 75108113M Hinge: Closer with Final Snap Action 108S
- DND - 75108213M Hinge: SureClose 108 AT90 S, Flush Mnt Self Closing
- DND - 75108214M Hinge: SureClose 108 AT90 W, Flush Mnt Self Closing
- DND - 75108223M Hinge: SureClose,108SF AT90 S, Flush Mnt, Self-Closing, Screw On
- DND - 75108224M Hinge: SureClose,108SF AT90 W, Flush Mnt, Self-Closing, Weld-On
- DND - 7515 Bracket: Flush Mount Post Mounting Bracket
- DND - 7525 Bracket: SureClose, Post Mounting Bracket, Steel Weld-on
- DND - 77108523 Hinge: SureClose, ConcealFit, Self-Closing hinge Kit
- DND - 78108513 Hinge: SureClose, ConcealFit Hinge
- DND - 7811S Alum. Gate -side Box for hinge-closer
- DND - 7812S ConcealFit Aluminum Gate-Side Weld Box for Hinge
- DND - 7813S Post-side Box for closer & hinge
- DND - 7821S Gate-side Box for hinge-closer
- DND - DD94799 Steel Gate Box Kit
- DND - DDCL410BKMG Tubular Latchbolt, Black Marine Grade Finish
- DND - DDPGBWS1 Weldable Gate Box for CL200, CL400
- DND - LLD3KA Privacy and Security Latch, Keyed alike, Black
- DND - LLMKABT Magnetic LokkLatch, Blk, Keyed Alike.
- DND - ML3TPKA MAGNALTACH, Top Pull - 6-Pin Lock - Keyed Alike
- DND - ML3VPKA MAGNALTACH, Vertical Pull - 6-Pin Lock - Keyed Alike
- DND - TCHD1AL2S3BT Hinge: TrueClose, Self Close Pool Gate Hinge Set (Pair) w/ Legs
- SHU - CI2140 Carriage Plates, for 4 Inch HardCORE V-Groove Wheels
- SHU - CI2160 Carriage Plates, for 6 Inch HardCORE V-Groove Wheels
- SHU - CI2240 V-Groove Wheel: 4" HardCORE Cantilever Assembly
- SHU - CI2350 Guide Roller: Extended HardCORE Guide Assy
- SHU - CI2415 V-Groove Wheel: 4" Whl, 1-1/2" Gate Frame
- SHU - CI2420 V-Groove Wheel: 4" Whl, 2" Gate Frame
- SHU - CI2515 V-Groove Wheel: 4" Whl, 1-1/2" Gate Frame, w/Carriage Plates
- SHU - CI2520 V-Groove Wheel: 4" Whl, 2" Gate Frame, w/Carriage Plates
- SHU - CI2615 V-Groove Wheel: 6" Whl, 1-1/2" Gate Frame
- SHU - CI2620 V-Groove Wheel: 6" Whl, 2" Gate Frame
- SHU - CI2625 V-Groove Wheel: 6" Whl, 2" Gate Frame
- SHU - CI2720 V-Groove Wheel: 6" Whl, 2" Gate Frame, w/Carriage Plates
- SHU - CI3000 Hinge: Original Badass, Double Bearing, Plated, Each
- SHU - CI3050 Hinge: Adjustable Surface Mount, 180 degrees (One Hinge)
- SHU - CI3100 Hinge: Rusted Original Badass Hinge
- SHU - CI3200 Hinge: Combo BadAss, AL Yoke, Steel Body
- SHU - CI3300 Hinge: Combo BadAss, Steel Yoke, AL Body
- SHU - CI3400 Hinge: Aluminum Badass, AL yoke, AL Body
- SHU - CI3500 Hinge: Heavy duty BadAss, 3-Bearing
- SHU - CI3520 Hinge: 100 year BadAss, 3 bearing
- SHU - CI3600 Hinge: Baby Badass, Zinc Plated, Single Bearing, each
- SHU - CI3650 Hinge: Baby Badass, Aluminum, Single Bearing, each
- SHU - CI3700 Hinge: Bolt-on BadAss, 2 Hole Steel to 2 Hole Steel
- SHU - CI3720 Hinge: Bolt-on, 180 degree Face Mount, BadAss
- SHU - CI3740A Hinge: Half Bolt-on BadAss, 4 hole Steel Yoke, AL Body
- SHU - CI3750B Hinge: Baby Bolt-On BadAss
- SHU - CI3770 Hinge: Half Bolt-On BadAss
- SHU - CI3780 Hinge: Half Bolt-On BadAss, 2 Hole Steel Yoke, AL Body
- SHU - CI3800 Hinge: SS BadAss, All Stainless Steel
- SHU - CI3850 Hinge: Self Closing BadASS Hinge set
- SHU - CI3900 Hinge: BadASS Uphill Strap hinge, short
- SHU - CI3925 Hinge: BadASS Uphill Strap hinge, long
- SHU - CI3950 Hinge: BadASS Barrel Hinge
- SHU - CI3975 Hinge: BadASS Uphill Strap hinge Set
- SHU - CIP110 Spacer Packet, 2 1/2" w/ 3 1/2" Bolt and Lock Nut
- SHU - CIP120 V-Groove Wheel Spacer (2 Req'd)
- SHU - cip140 Clip; Rep circlip for CI3000 Badass Hinge
- SHU - CIP150 Bearing: Replacement for CI3000 Hinge
- SHU - CIP150H Bearing: Replacement for CI3520 Hinge, 100 Year
- SHU - CIP155 Bearing: Replacement for CI3600 Hinge
- SHU - CIP170 V-Groove Wheel: 3" Bolt
- SHU - CIP200 V-Groove Wheel: Washer, 2 Req'd per Wheel
- SHU - CIP210 V-Groove Wheel: Lock Nut
- SHU - CIP250 Spacer: For CI3000
DAC Industries, Inc.
- DAC - 5200 Rear Pipe Roller, Plastic Wheel, w/Bracket
- DAC - 5350-4S Cantilever Wheel: 2" Sq frame, 4" Sq Post
- DAC - 5658 Cantilever Wheel: HD Nylon 2 1/2 Rnd Frame x 6 5/8 Post Mnt
- DAC - 5800-4HD Cantilever Wheel: 2-3/8" frame, 4" Rnd post, Welded Brkt
- DAC - 5950-B Stealth Series Roller Cover - Bottom
- DAC - 5950-T Stealth Series Roller Cover – Top
- DAC - 6000-XX Surface Mount Exit Bar Silver
- DAC - 6003 Exit Bar: Detex Exit Bar, Surface, 36 inch, Black
- DAC - 6004 Exit Bar: Detex Superior Exit Bar - 48"
- DAC - 6005-36B Exit Bar: Black, 36", Electronic Release Switch
- DAC - 6011 Interchangeable Core Rim Cylinder Housing
- DAC - 6014 Key Cylinder w/ 2 Keys for Superior Exit Bar Kit
- DAC - 6015-X Gate Latch Protector - Specify Silver or Black
- DAC - 6017X Push Pad Protector - Specify Color Black, Sliver, Red
- DAC - 6020-B Exit Bar: Detex Strike Latch Receiver Bracket - Black
- DAC - 6025-S Lockbox: Silver
- DAC - 6026-B Exit Bar: Detex Black Lock Box - NO TABS
- DAC - 6040 Exit Bar: Deluxe Exit Bar Kit Silver Plate
- DAC - 6045-36B Exit Bar: Detex Superior Exit Bar Kit - 36", Black
- DAC - 6045-36S Exit Bar: Detex Superior Exit Bar Kit - 36", Silver
- DAC - 6045-48B Exit Bar: Detex Superior Exit Bar Kit - 48", Black
- DAC - 6045-48S Exit Bar: Detex Superior Exit Bar Kit - 48", Silver
- DAC - 6047-S36 Exit Bar: Alarmed Superior Kit. Inc. Lock Box, Cylndr and Keys
- DAC - 6100-S Exit Bar: Lever Handle for Detex Exit Bar, Silver
- DAC - 6110-B Exit Bar: Lever Handle for Detex Exit Bar, Black
- DAC - 6110-S Exit Bar: Lever Handle for Detex Exit Bar, Silver
- DAC - 6200XX Exit Bar: Electrified Control Trim for Delux Bar - Specify Left of Right
- DAC - 6450-B Lockset: Combo Lock for Panic Bar Kits, Black Lockbox, Field Reversible
- DAC - 6450-S Lockset: Combo Lock for Panic Bar Kits, Silver Lockbox, Field Reversible
- DAC - 6700-X Exit Bar: Adj Mntg Plate-use with Detex Bar w/ Lock Box, Specify Blk or Slv
- DAC - 6800 Exit Bar: Extension Plate: 3rd Piece to extend Panic Bar to 74" Max. Silver
- DAC - EAX-300W Door Prop Alarm
- DAC - GB1150 Lock Box: DAC Weld-In Box fits Model 1150 locksets
- DAC - Keyed Alike Cylinder (Mortise) Keyed Alike Option
- LOC - TB400 Ped Gate Closer: HYD, Blk, 175LB rated
- LOC - TB400SS Ped Gate Closer: HYD, SS, 175LB rated
Delta Scientific
- DEL - TSP01 Spring: for TC14 Surface MountTraffic Spike
- DEL - TSP07 Saber Three Tooth Assembly For TC3, TC8 and TC12 Units
DoorKing
- DOO - 1000-045 Post Mount for 1000 Inverter
- DOO - 1200-009 Hinge Assembly: Swing Gate, Flange Bearing Type
- DOO - 1200-019 Hinge: Sealed Bearing Gate Hinge, Small, 2000 lbs.
- DOO - 1200-036 Pedestal: Arch, Offset Pad Mnt, Small.
- DOO - 1200-037 Pedestal: Arch, Pad Mnt, Large. (fits full-size phones)
- DOO - 1200-038 Pedestal: Arch, In-Grnd Mnt, Large, Fits Full-Size Phones
- DOO - 1200-039 Hinge: Heavy duty assembly 3,000 lbs
- DOO - 1200-045 Pedestal: Std, Pad Mnt. (Fits key pads)
- DOO - 1200-046 Pedestal: 72" In-Ground Mount Gooseneck
- DOO - 1200-049 Pedestal: Dual Height, Pad Mnt, 42" & 72" Fits Keypads
- DOO - 1200-050 Pedestal: HD Archtl Style Pad Mnt No Offset, Full-Size TES
- DOO - 1200-051 Pedestal: HD Archtl, In-Grd Mnt, No Offset, Fits Full-size TES
- DOO - 1200-057 Adaptor: In-ground 2x2 Adaptor for Std. Style Mounting Post.
- DOO - 1200-085 Pedestal: Designer, Pad Mnt, Fits Full-Size Phones
- DOO - 1200-086 Pedestal: Designer, Pad Mnt, (Offset, fits full-size phones)
- DOO - 1200-087 Pedestal: Designer, Light Tower
- DOO - 1201-000 V-Groove Wheel: 6" Single (steel, sealed bearing)
- DOO - 1201-004 V-Groove Wheel: 4 Inch UHMW w/ Sleeve Bearing
- DOO - 1201-006 V-Groove Wheel: 4" Single, UHMW, Sealed Bearing
- DOO - 1201-010 V-Groove Wheel: 4" Tandem, Steel, Sealed Bearing
- DOO - 1201-012 V-Groove Wheel: 4" Tandem, UHMW, Sealed Bearing
- DOO - 1201-016 V-Groove Wheel: 4" Single (steel, sealed bearing)
- DOO - 1201-105 V-Groove Wheel: 4" UHMW Assembly w/ Bearings
- DOO - 1201-117 V-Groove Wheel: 4" w/ Housing, Steel, Sealed Bearing
- DOO - 1201-210 V-Groove Wheel: 6" Tandem (Steel, Sealed bearing)
- DOO - 1204-004 Retainer: End Retainer Gate Catch for End of Slide Gate
- DOO - 1204-005 Guide Roller: 3" Replacement Wheel Only
- DOO - 1204-015 Bracket Only: (Slotted Holes) : Double Guide Rollers Only
- DOO - 1204-120 Guide Roller: 3" Single w/ Bracket and UL Wheel Cover
- DOO - 1204-121 Guide Roller: 6" Single w/ Bracket and UL Wheel Cover
- DOO - 1204-122 Guide Roller: 3" Double w/Bracket and UL Wheel Cover
- DOO - 1204-123 Guide Roller: 6" Double w/bracket and UL Wheel Cover
- DOO - 1216-080 Maglock: 1200 lb, (Kit)
- DOO - 1514-020 Antenna Cap, Plastic for Pad Mount 6300
- DOO - 1601-111 Bolt: Carriage, 5/16-18x2 SS Wht Painted
- DOO - 1610-010 Lock Down Tool
- DOO - 1615-017 Light Cage
- DOO - 1812-170 Bracket: Camera Mount
- DOO - 2351-190 Quad Box Wire Harness for tracker boards
- DOO - 2601-222 Idler Wheel, UHMW 9000
- DOO - 2601-224 Spacer Idler Model 9000
- DOO - 2601-271 Chain: Master Link #80
- DOO - 2601-272 Chain: 20 FT #100
- DOO - 2601-349 Spacer Cover Right (6500)
- DOO - 2615-040 Bolt: Hex Head 5/8-11 x 3"
- DOO - 2615-052 Bolt: HH 3/8-16 x 1
- DOO - 2615-084 Bolt: Hex Head 1/2-13 x 2 1/2
- DOO - 2615-128 Bolt: Hex Head 3/8-16 x 3/4
- DOO - 2615-673 Bolt: Carriage, SS 3/8-16 x 2 1/4 Painted
- DOO - 2616-088 Set Screw 1/4-20 x5/16 SS
- DOO - 2616-809 Chain Bolt Kit
- DOO - 4001-034 Lock N16058BDxSFx2K Key Random (4001-034)
- DOO - B01-S12 Bracket: Armature Bracket for DKML 1200 Maglock
- DOO - B03-S12 Bracket: Set of L&Z Brackets w/ Hardware
- DOO - B03-S6 Bracket: Set of L&Z Brackets w/ Hardware
- DOO - B05-S12S6 Spacer Bar
- DOO - DK-AP1661H Maglock: Armature plate, 1200 lb locks
- DOO - DKEB-M-1 Dead Bolt: Mortise Mount, Fail-Safe
- DOO - DKES-C1-1FS Electric Strike: Fail Safe 11/32 Keeper
- DOO - DKES-C1-1FX Electric Strike: Fail Secure 11/32 Keeper
- DOO - DKES-C2-1FS Electric Strike: Fail Safe 20/32 Keeper
- DOO - DKES-C2-1FX Electric Strike: Fail Secure 20/32 Keeper
- DOO - DKGL-S12-1 Maglock: 1200 lb (12/24 VDC)
- DOO - DKGL-S12-1L Maglock: 1200 lb, W/Relay (12/24 VDC)
- DOO - DKGL-S6-1 Maglock: 600 lb, (12-24 VDC)
- DOO - DKML-HP Hardware Kit:for Armature Plate
- DOO - DKML-M6-1 Maglock: 600 lb, (Mortise Mount)
- DOO - DKML-S12-1-PCB PCB: Replacement Board for Interior Door, 1200# Maglock
- DOO - DKML-S12-1LT Maglock: 1200 lb w/ Relay and Timer
- DOO - DKML-S12-2LT Maglock: 1200 lb, Dual Door w/ Relay and Timer
- DOO - DKML-S6-1 Maglock: (Interior use only) 600 lb, Single Door, Surface Mnt.
- DOO - DKSL-M20-1L Shear Lock: 2000 lbs, Mortise Mount, w/ LED and Relay
- DOO - XCHG-A 1800-010 Exchange
Dorene Gate Openers
- DOR - DML-1300 Maglock: Kit, 1300 lb (Includes Mnt Brkts and transformer)
- DOR - DML-AP Maglock: Armature Plate
- DOR - DML-AWP Maglock: Armature Weld Plate
- DOR - DML-BP Maglock: Back Plate (Mounting plate for Maglock)
- DOR - DML-HK Maglock: DML Hardware Kit
- DOR - DML-ML Maglock: Lock only (Replacement Maglock)
- DOR - MH-4NLR Gate Receiver 4" No Lift V Gate Rec.
- DOR - MH-4VGR Gate Catch: 4" V Gate Receiver With UMHW Pads.
- DOR - MH-HD-HU Hinge: Heavy Duty Uphill (Pair)
- DOR - MH-HDHU3/4 Hinge: Heavy Duty Uphill w/ 3/4" Blade
- DOR - MH-HIDMP UMHW Spacer for HID MaxiProx Long Range BLACK 1"
- DOR - MH-NPI Idler: 180 or 90 deg Safety Guard Chain Idler
- DOR - OP-FMB Front Mount Chain Bracket - SLOTTED HOLE
- DOR - OP-RMB Rear Mount Chain Bracket-2 HOLES
- DOR - RG-D12 Guide Roller: 12", Dual
- DOR - RG-D6 Guide Roller: 6", Dual
- DOR - RG-DU12 Guide Roller: 12", Dual (UL325)
- DOR - RG-DU6 Guide Roller: 6", Dual (UL325)
- DOR - RG-S18L Guide Roller: 18" Single, Assembly Left
- DOR - RG-S18R Guide Roller: 18" Single, Assembly Right
- DOR - RG-SU12 Guide Roller: 12" guide roller covered UL (3 sided)
- DOR - RG-SU6 Guide Roller: 6", Single (UL325)
- DOR - RGC-12B Guide Roller: Non UL, 12" Blk
- DOR - RGC-12W Guide Roller: Non UL, 12" WHT
- DOR - RGS18-L Guide Roller: 18", Two Sided Left Hand
- DOR - RGS18-R Guide Roller: 18", Two Sided Right Hand
- DOR - ROL-6B Guide Roller: 6" Replacement Roller - Black
- DOR - ROL-6W Guide Roller: 6" Replacement Roller - White
- DOR - SGL51 Solenoid Lock:
- DOR - WD-4V V-Groove Wheel: 4" UHMW
- DOR - WE-4V V-Groove Wheel , Economy, 4" x 1/2" Axle
- DOR - WPT5X Pipe Wheel: 5" UHMW Pipe Wheel
- DOR - WT4VS V-Groove Wheel: Tandem 4" Wheel Assembly w/ Steel V-Groove Wheel
EMX Industries
- EMX - 1170-1 PHOTOEYE VAULT, Photo Eye Bollard/Mnt Post, Blk
- EMX - IRB-BX (single box) (discontinued) Enclosure: Plastic Enclosure (4X only)
- EMX - IRB-SP (Call EMX for current price.) Liquid Tight Strain Relief Set (2 per set)
Everlock Systems
- EVE - SLT-4 Lock System, 4 User
FAAC International, Inc.
- FAA - 4304015 Bracket: Front, for 402
- FAA - 490122.1 Rack Steel, 3.3 ft ea, 4 Pcs
- FAA - 712650/712651.5 (Kit) Solenoid Lock: Solenoid, Single Cylinder w/ Strike Plate
- FAA - 7284005 Rear Bracket Plate (400/402/422/415)
FUH Industrial
- FUH - 80-1R/50 Chain: #80, 50ft
- FUH - 80ML Chain: #80 Master Link
- FUH - Powerhinge (FUH) Hinge: Solid Cold Rolled Steel, 3000lb Capacity
- FUH - RC2-25-1R/10 Chain: #25, 10ft. Includes 1 master link
- FUH - RC2-25-1RCL Master Link, #25
- FUH - WHL-4-C-EB Wheel: 4" Power Wheel
- FUH - WHL-6-Y-EB Wheel: 6" Power Wheel - Single
- GCI - 50SSML Chain: Masterlink, #50, Stainless Steel
GCI Tech Info/House Brand
- FUH - RC2-50-1R/100 Chain: #50, 100 ft.
- GCI - 1002529 Lock Cylinder: SCHL/LOCK 20-740-XP-626 MK KS22189 KA FA10 W/2 KEYS
- GCI - 25-60 Chain: Chain Breaker
- GCI - 3510 Chain: #35, 10 Feet
- GCI - 35ML Chain: Master Link, #35
- GCI - 4010 Chain: #40 10 feet
- GCI - 40100 Chain: #40, 100 feet
- GCI - 4025 Chain: #40, 25 feet
- GCI - 40ML Chain: Master Link, #40
- GCI - 40NP10 Chain: #40 Nickel Plated 10 feet
- GCI - 40NP100 Chain: #40 Nickel Plated Chain 100 Ft.
- GCI - 40NPML Chain: Master Link, #40 Nickel Plated
- GCI - 40SS10 Chain: #40 SS, 10 feet
- GCI - 40SS100 Chain: #40 SS, 100 ft
- GCI - 40SSML Chain: Master Link, #40 SS
- GCI - 4110 Chain: #41 Length 10 feet
- GCI - 41100 Chain: #41, 100 feet
- GCI - 41ML Chain: Master Link, #41
- GCI - 41NP10 Chain: #41 Nickel Plated10 feet
- GCI - 41NP100 Chain: #41 Nickel Plated Chain 100 Ft.
- GCI - 41NPML Chain: Master Link, #41 Nickel Plated
- GCI - 41SS10 Chain: #41 SS, 10 feet
- GCI - 41SSML Chain: Master Link, #41 SS
- GCI - 5010 Chain: #50, 10 Feet
- GCI - 50ML Chain: Master Link, #50
- GCI - 50NP10 Chain: #50, Nickel Plated 10 feet
- GCI - 50NP100 Chain: #50 Nickel Plated Chain 100 Ft.
- GCI - 50NPML Chain: Master Link, #50 Nickel Plated
- GCI - 6010 Chain: #60, 10ft
- GCI - 60ML Chain: Master Link #60
- GCI - 60NP10 Chain: #60, Nickel Plated 10 feet
- GCI - 60SS10 Chain: #60 SS, 10 Feet
- GCI - 60SSML Chain: #60 SS, Master Link
- GCI - 7100-515-628-00 Electric Strike: 24VDC Continuous or Intermittent Fail-Secure
- GCI - 8010 Chain: #80, 10 Feet
- GCI - 83577-GT V-Track: galv. 20 ft, roll formed, (vtrack, v track)
- GCI - ALLEGION 653-1515 613 L2 CYL-KA Keyswitch, Bronze
- GCI - ALLEGION 653-1515 630 L2 CYL-KA Keyswitch, Satin SS
- GCI - ALLEGION CDSI-PA-AX-99DT-US28-48-WH CDSI-PA-AX-99DT-US28-36-WH -- --
- GCI - ALLEGION CDSI-PA-AX-99NL-US28-48-WH CDSI-PA-AX-99NL-US28-36-WH -- --
- GCI - ALLEGION PA-AX-99L-US28-36-WH PA-AX-99L-US28-36-WH -- --
- GCI - Chain Breaker B-5035 Wrench-Drive Roller Chain Breaker for 35, 40, 41 and 50
- GCI - CS105681 Lock Cylinder: GEN LOCK SP IC6S SC 26D 0BIT
- GCI - CS1211120 Lever Escutcheon, VON DUPRIN 230L SP28
- GCI - CS124960 Closer: Jamb Plate For Hydraulic Closer CS124908
- GCI - CS176078 Lever Trim, VON DUPRIN 22L SP28
- GCI - CS214031 Lock Cylinder: SCHL/LOCK, 20-079, 626, FSIC, RIM CYL, Housing coreUS26D
- GCI - CS229465 Lock Cylinder: SCHL/LOCK 20-059 626
- GCI - CS256742 Lock Cylinder: Mortise, GEN LCK SP MC114 SC 26D ST KA2
- GCI - CS256793 Rim Cylinder, 6-Pin, Schlage
- GCI - CS375012 Exit Bar: General Lock, exit only, panic 36", Blk
- GCI - CS424202 SCHL/LOCK KS43F3200
- GCI - CS896241 Von Duprin Door 99EO, US26D, Rim Exit Device
- GCI - L280S 626 C 238 S Latch Set: 2-3/8, Lever, Storeroom, Satin Chrome
- GCI - Megohmmeter Loop Tester
- GCI -050535 VON DUPRIN EL Solenoid and Plunger
- GNL - CX5016 689 Closer: Hydraulic Closer For Pedestrian Gates
- SCH - L280S 626 C 234 S Latch Set: 2-3/4, Lever, Storeroom, Satin Chrome
- SCS - 018470-2 Rear Pipe Roller, Steel Wheel, w/Bracket
HI-Motions
- HIM - 14727-16 Tie Rod Adjusting Bolt, Medium (1/2 x 16)
- HIM - 14728-16 Tie Rod Adjusting Bolt, Large (5/8 x 16)
- HIM - 14729-M20 Tie Rod Adjusting Bolt, Extra Large (3/4 x 16)
- HIM - 204.2 Guide Rollers for HIMOTION
- HIM - 208.1 Adjustable guide plate (gate guide roller assy)
- HIM - 280.B41 Telescoping Slide Gate Kit
- HIM - 284.50 Telescoping Slide Gate Anti-Turn kit
- HIM - 301.16XXL Support Roller Assembly, 16 wheel, for XXL Size Track
- HIM - 301.8L Support Roller Assembly, 8 wheel, for Large Track
- HIM - 301.8LAV Conversion Kit, Wheel, to fit Piccolo
- HIM - 301.8M Support Roller Assembly, 8 wheel, for Medium Track
- HIM - 301.8XL Support Roller Assembly, 8 wheel, for XL Size Track
- HIM - 301.9MT Support Roller Assembly, 9 wheel, for Medium Track, Top Mount
- HIM - 303.8L Foundation Plate (Large)
- HIM - 303.8XL Foundation Plate (Extra Large)
- HIM - 304.8L102 Post-Mount Bracket, (L), 4" Rnd Pipe Post
- HIM - 304.8L102Q Post-Mount Bracket, (L), 4" SQ Tube Post
- HIM - 304.M102Q Post-Mount Bracket, (M), 4" SQ Post
- HIM - 304.M73 Post-Mount Bracket, (M), 3" Rnd Pipe Post
- HIM - 307.L End Cap Guide Roller for Large Track
- HIM - 307.M End Cap Guide Roller for Medium Track
- HIM - 307.XL End Cap Guide Roller for Extra Large Track
- HIM - 307.XXL End Cap Guide Roller for XXL Track
- HIM - 309.L Steel End Cap for Large Track
- HIM - 309.M Steel End Cap for Medium Track
- HIM - 309.XL Steel End Cap for Extra Large Track
- HIM - 309.XXL Steel End Cap for XXL Track
- HIM - 310.L Gate Catch/Limit Stop for Large Track
- HIM - 310.M Gate Catch/Limit Stop for Medium Track
- HIM - 310.XL Gate Catch/Limit Stop for Extra Large Track
- HIM - 310.XXL Gate Catch/Limit Stop for XXL Track
- HIM - 323.6 Track M (Medium) 20 ft, Galv
- HIM - 330.6 Track L (Large) Galv, 20ft (236" actual length)
- HIM - 333.6 Track XL (Extra Large) 20 ft, Galv
- HIM - 334.55 Track XXL (Extra Extra Large) 18 ft, Bare Finish
- HIM - 335.55 Track XXL (Extra Extra Large) 18 ft, Galv
- HIM - 604.42 Roller for Premium Track (Overhead Door Hardware)
- HIM - 626.42 Track, Premium, Galv (Overhead Door Hardware)
- HIM - 631.42 Track Support Brkt, Premium (Overhead Door Hardware)
- HIM - 632.42 Junction Bracket, Premium (Overhead Door Hardware)
- HIM - 641.42 Roller Guide with plate, (Overhead Door Hardware)
HySecurity
- HYS - MX000673 Nut: Sq. nut .375" 16, zinc
- HYS - MX000674 Truss: HMS 3/8-16 slotted
- HYS - MX000851 Chain: Master Link, #40, Corrosion Resistant DacroClad
- HYS - MX002212 Chain: #40, 10 ft, Corrosion Resistant Dacroclad
- HYS - MX3760 Spring Tube, WSmart Assembly
- HYS - MX4057 Harness: LED Light/Kill Switch
- HYS - MX4560 Chain: Kit, #40, 30 ft, Corrosion Resistant Dacroclad
IML Security Supply
- IML - KANTSLAM Closure: Closes Lrg or Sm Gates & Doors up to 150lbs.
International Door Closers, Inc.
- IDC - 1805-AL Closer: Hydraulic Door/Gate Closer, Complete, Aluminum.
- IDC - 230 HO 230 Concealed Closer, comes w/ 3010-s arm & pivot, 90 deg w/hold open
- IDC - 311-RVLS Closer: Hydraulic Gate Closer
- IDC - 44-18G Drop Plate for Top Jamb Installation
- IDC - 44CI-AL Closer: Hydraulic Door Closer, AL, Grade 1
- IDC - 8051-TP-AL Closer: Surface Applied, Grade 1 w/ Sweep and Latching
- IDC - 855-AL Closer: Standard Duty Surface Mount Door Closer
- IDC - 8810S-36-US32D Exit Device, Panic Rated, 36" Dr., Brushed Finish
- IDC - 89L01B Passive Lever Trim for 8800 Rim Exit Device, No Mortise Cylinder
- IDC - TJB-54-AL Bracket: Top Jamb Bracket for Mounting Closer.
KABA Simplex
- KAB - 1011-26D-41 lockset: Mechanical code lock set, Satin, knob
- KAB - 5010XS-WL-26D-41 Lockset: Mechanical Code, Lever
Keedex, Inc.
- KEE - ICAN Housing: "iCan" Access Control Housing, Accepts 2 Gang Devices
- KEE - K-BXDiG23 Lock Box: Keedex Weld-In Box Fits Lockey 2835
- KEE - K-BXDiG23-AL Lock Box: Keedex Weld-In Box, Aluminum, Fits Lockey 2835
- KEE - K-BXED-V22 Lock Box: Keedex Weld-In Box, Steel, fits Von Duprin 22
- KEE - K-BXED-V22 Lock Box: Keedex Weld-In Box fits Von Duprin 22
- KEE - K-BXES-EN400 Electric Strike Box
- KEE - K-BXES1 Lock Box: Keedex Weld-In Box, fits Trine 005 Electric Strike
- KEE - K-BXES2 Lock Box: Keedex Weld-In Box fits ROFU Electric Strike
- KEE - K-BXES8 Lock Box: Keedex Weld-In Box, fits Trine 001 Electric Strike
- KEE - K-BXSIM Lock Box: Keedex Weld-In Box fis KABA ILCO 1000 ALR LK
LiftMaster (Chamberlain Group)
- ELI - AH103-4 V-Groove Wheel Bracket, Fits 4" Wheels
- ELI - AH107 V-Groove Wheel: 4" "Power Wheel", One Pair
- ELI - AH110 V-Groove Wheel: 6" "Power Wheel", Single
- ELI - MG1300 Maglock: 1300 lb, Kit
- ELI - POWERHINGE Hinge: Steel, 1-PAIR SS Pin, 3000# Capacity
- ELI - POWERHINGE-2 Hinge: Steel/Aluminum, 1-PR Stainless Steel Pin, 3000# Capacity
- ELI - POWERHINGE-3 Hinge: Aluminum, 1-PR Stainless Steel Pin, 3000# Capacity
- LIF - 041A6102 Power Door Lock Replacement Kit
- LIF - 041A6298-5 Hardware Kit, 3950 for CDO Light Duty
- LIF - 041DJ002MC RECEIVER LOGIC BOARD, RJO, 2.0 - FOR 8500 GDO
- LIF - 07-2101 MSW ARM HUB REV. E MACHINE SHOP
- LIF - 2000P Hinge: Heavy Duty, Primed, Pair
- LIF - 2000U Hinge: Heavy Duty Hinge, Unfinished, Pair
- LIF - 2000Z Hinge: HD Flat Gate, Flat Post (Z) 1 Pair
- LIF - 2010P Hinge: HD with Zerk Fitting Sold as Pair
- LIF - 2010Z HD Hinge: Round Gate/Round Post Mount, 1 Pair
- LIF - 2060P Hinge: Standard Duty, Pair, Flat Mount, Primed
- LIF - 2064P Hinge: Heavy-Duty, Round to Gate, Round to Post, Primed
- LIF - 2100U Hinge: Std.-Duty, Flat Mount, Both Sides Single (Unfinished)
- LIF - 22204S V-Groove Wheel Cover: Box Type Cover for 4" V-Groove Wheel
- LIF - 22206S V-Groove Wheel Cover: Box Type Cover for 6" V-Groove Wheel
- LIF - 3110P Hinge: Pair w/ "Grip" & Zerk Fitting, Primed
- LIF - 41002S Sliding Gate Latch
- LIF - GPINLCK Lock: Gate Pin Lock
- LIF - HT5000V V-Groove Wheel: Heat-Treated, Zinc Plated, 6 In, Single
- LIF - LMDBPACK-OB Touch Screen Deadbolt. Includes 821LMC Smart Garage Control
- LIF - LMLEVPACK OB LiftMaster Smart Keypad Lever Lock in Oil-Rubbed Bronze
- LIF - LMLEVPACK SN Yale-LiftMaster Smart Keypad Lever Lock in Satin Nickel
- LIF - SWG600 HEAVY DUTY HINGE
- LIF - SWG606 Hinge: Uphill, heavy duty
Linear Pro Access (Nortek)
- GTO - FTMT5030 Front Mount for SW3000
- LIN - GNB-1 Pedestal: 72" In-Ground Mount Gooseneck
- LIN - GNC-1 Pedestal: Curb Mount Gooseneck Pedestal
Locinox USA
- LNX - 3012-37-STD-GSZ Key Cylinder, 37 MM, Europrofile, Asymmetric
- LNX - 3018LA Chain link Adaptor Plate for SA Keeps
- LNX - 3019LA Chain link Adaptor Plate for LA & LS Locks
- LNX - 6403 Chain link Adaptor Plate for SH Keeps
- LNX - CLB-Mammoth Chain Link Adapter for Mammoth Closer.
- LNX - CLB-Tiger Chain Link Adaptor for Tiger Closer.
- LNX - DINO-9005 Hinge: Double Bearing, 2-way Adj, Black
- LNX - EGS Economic Ground Stop Without Stop Plate
- LNX - KEYDROPK9005QF1G21Z Lockable Drop Bolt (Black)
- LNX - KEYDROPKZILVQF1G21Z Lockable Drop Bolt (Silver)
- LNX - LFKQ4040X1L9005CR Gate Lock: Free Vinci, Blk
- LNX - LFKQ4040X1LZILVCR Gate Lock: Free Vinci, Silver
- LNX - LFKQ60X1LCR-9005 Gate Lock: Free Vinci, Blk
- LNX - LION-9005 Ped Gate Closer: Compact Hyd, Closer, Black
- LNX - LMKQ6060V2L9005VSZC Gate Lock: Free Vinci, Alum.
- LNX - LUKY5050J5L9005VMZB Gate Lock: Surface Mount, Mortise Cylinder
- LNX - LUKY5050J5L9005ZCZFA Gate Lock, Blk, Accepts US Mortise Cyl (not included)
- LNX - MAMMOTH 180-9005 Ped Gate Closer: Hydraulic, 180 Deg, Black
- LNX - MAMMOTH 180-ZILV Ped Gate Closer: Hydraulic, 180 Deg, Silver
- LNX - MAMMOTH-HD-9005 Ped Gate Closer: Hydraulic, HD, 180 Deg, Blk
- LNX - MAMMOTH-SPARE Spare Parts Hardware Bag for MAMMOTH-180
- LNX - MODULEC-SA Electric Strike, Surface Mount, Locinox locks only
- LNX - MRT-118-GMA Mortise Cylinders Set, Keyed Alike
- LNX - P00011014 ELECTRADROP-E, Silver, Fail Close
- LNX - P00011020 ELECTRADROP-E-P, Black, Position Detection, Fail Close
- LNX - P00011038 ELECTRADROP-R-P, Black, Position Detection, W/ Battery
- LNX - P00011550 PENTOP-80-Std Kit
- LNX - Panther-9005 Hydraulic gate closer for wall and post mounting in RAL 9005
- LNX - PUSHBAR-L-1400 Pushbar, Alum for Srfc Mnt Gate Locks
- LNX - SAKL-9005-QF2 Adjustable Keep, Sq frame, SS, Black.
- LNX - Samson-2 Hydraulic Retrofit Gate Closer for Gates up to 330 lbs.
- LNX - SH-KLALUMQF2K Adj Sec Keep SS for Square Profiles, Stop Plate Alum
- LNX - Shield-Alum Anti-Theft Protection Plate for Locinox Keeps
- LNX - SHKL-9005-QF2K Adjustable Security Keep, Sq frame, SS, Black
- LNX - Tiger-9005 Ped Gate Closer: Compact Hinge and Closer, Black
- LNX - TIGER-ZILV Ped Gate Closer: Hydraulic 180 Deg, Blk
- LNX - U-SAFE Safety Cable, SS, 1100 lbs
- LNX - VERTICLOSE-2-9005 Ped Gate Closer: Hydraulic, 90 and 180 Deg, Blk
- LNX - VERTICLOSE-2-ZILV Ped Gate Closer: Hydraulic, 90 and 180 Deg, Silver
- LNX- P00011390 ROLLTOP-60 Adjustable rollerbolt
- LOC - 3DM-VP100-P50-A2 Hinge: SS Ornamental Hinge
- LOC - P00000500 Mounting Bolt for 6060 Locks
- LOC - P00002315 Mounting Sleeve for 6060 Locks
- LOC - P00004468 Aluminum Gate Stop
- LOC - P00007681 - MAG600 SM Maglock, w/ push/pull handle - MAG6000, Silver
LOCKEY/GOKEYLESS
- LOC - 1150 Lockset: Mechanical Keyless, Single Combo, Heavy Duty
- LOC - 1150-DC Lockset: Mechanical Keyless Lockset, Heavy Duty
- LOC - 2830-JBMG Lockset: Mechanical Keyless Lock Set, Knob, SingleSided, Jet Blk
- LOC - 2835-JBMG Lockset: Mechanical Keyless Lock Set, Single Sided, Jet Black
- LOC - 2835-JBMGDC Lockset: Mechanical Keyless Lock Set, Double sided, Jet Black
- LOC - 2835-MGDC Lockset: Mechanical Keyless Lock Set, Double sided, Gray
- LOC - 285PSCMG Lockset: Mechanical Keyless Lever, Panic Trim
- LOC - 3830SCMGDC Lockset: Mechanical 3830 Double Combination
- LOC - Codelocks CL515 Codelocks CL515 Latchbolt Lock
- LOC - EXT-KIT 2000 Extension Kit for Use w/ 2000 Series
- LOC - GL2JBMG Lockset: Lockey Sumo GL2 SM Gate Lock, Jet Blk, Marine Grade
- LOC - GS-90 Gate Stop
- LOC - K-BXDIG-1150 Lock Box: Lockey Weld-In Box fits Model 1150 lockset
- LOC - M210JB Lockset: Mechanical Code Deadbolt, Jet Black, Twist Knob
- LOC - PB1100-SS-36 Panic Bars - PB1100 Panic Bar, 36" - Stainless Steel
- LOC - PSGB200SILVER Lock Box: Weld-In Trim Box fits Model 285P - Silver
- LOC - TB100 Ped Gate Closer: Turtleback Gate Closer
- LOC - TB600 Ped Gate Closer: HYD, 250LB rated
- LOC - TB650 Gate Closer: Adjustable Hydraulic, Extra Heavy-Duty (250lb Max)
- LOC - TB950 Ped Gate Closer: Hydraulic, with Hinge.
Magnetic Automation Corp
- MAG - MLPEIN01 Laser Scanner Horizontal Stand-Alone Housing Only
Maximum Controls, LLC
- MAX - MXR-C50 Chain: #50 Nickel Plated, 30 feet
- MAX - MXR-CBK Chain: Max Rhino Chain Kit, #50, Inc. Brackets & Bolts
- MAX - Rhino Chain Bolts Rhino Chain Bolts # 50 Chain
- MAX - Rhino Chain Brackets Rhino Chain Brackets # 50 Chain
McMaster-Carr
- GCI - Chain Breaker A-8050 Wrench-Drive Roller Chain Breaker for 50, 60 and 80
Metal Mart
- MET - HBR300 Hinge: 3" HD, Adjustable, Zinc (Pair)
- MET - HBR400 Hinge: 4" HD, Adjustable, Zinc (Pair)
- MET - MKH100 Hinge: 4", 180 deg, Zinc (Pair)
Motion Industries - CA
- GCI - 33000 Chain: 65 X 1/8 (43 RIV) Roller Chain
Nationwide Industries
- NWI - BBH-PSW-ZM Yoke/Bracket for Hinges
- NWI - HDBY-SBB-SBB Hinge: HD, Ball Bearing, Steel Bolt on Black Body/Black Yoke
- NWI - HDBY-SWM-SWM Hinge: HD Ball Bearing Adjustable Hinge
- NWI - LOCKBOX2C Lock Box: Weld-In Box, Steel, fits KYPD
- NWI - LOCKBOX2C-AL Lock Box: Weld-In Box, Aluminum, fits KYPD
- NWI - NW-TROLLEY4WA 4 Wheel Trolley Cantilever (2.10 DIA)
Nice Apollo
- APO - 1116 (10000415) Pivot Arm, Weld-on
- APO - N-MASTERKEYS Set of 10 keys with key ring
Optex, Inc.
- OPT - OVS-LBBL Bracket: Side Mount, Black, for Optex Sensor
- OPT - OVS-LBWH Bracket: Side Mount, White, for Optex Sensor
- OPT - OVS-LBYW Bracket: Side Mount, Yellow, for Optex Sensor
- OPT - OVS-MPB Mini post, 30" black for OVS Sensor
- OPT - OVS-MPBcurb Mini Post: 23" Black for OVS Sensor, Curb Mount.
- OPT - OVS-MPY Mini Post: 30" Yellow for OVS Sensor
- OPT - OVS-MPYcurb Mini Post: 23" Yellow for OVS Sensor, Curb Mount.
Pedestal Pro
- PED - 06-EXT-2 Extension: 6" Neck Extension (2" Tube, 4x4 Face Plates)
- PED - 12-EXT-2 Extension: 12" Wall Mount Keypad Extension
- PED - 33PED-BUT-002-304 Pedestal: 44" Stainless Steel (see details)
- PED - 36-9C Pedestal: 36" Gooseneck, Black Steel
- PED - 36-APD-BLK Pedestal: 36" Black, 6x6 Faceplate, Gooseneck
- PED - 36-LP-BLK Pedestal: 36" Blk Photo Eye Pedestal
- PED - 42-2LP Pedestal: 42" Black, Steel, Low Profile
- PED - 42-3-12 Pedestal: 42", Heavy Duty, Black, Steel, 3" SQ Tube
- PED - 42-3-12-SS Pedestal: 42" Stainless Steel Architectural
- PED - 42-9C-ALUM-BLK Pedestal: 42" Black, Aluminum, 2" Sqr Tube
- PED - 42-9C-BLK (PED01) Pedestal: 42" Bolt-Down Mount, Gooseneck
- PED - 42-9C-SS Pedestal: 42" Stainless Steel, Gooseneck Pedestal
- PED - 42-9C-WHI Pedestal: 42" White, Steel, Gooseneck
- PED - 42-9C-YEL Pedestal: 42" Yellow, Steel, Gooseneck
- PED - 42-TT Pedestal: 42" Dual Headed, Side-by-Side Pedestal horseshoe
- PED - 48-9C Pedestal: 48" Black, Steel, Gooseneck
- PED - 55BRE-PRO-01-CRS Custom Steel Break Away Bracket for Pedestals
- PED - 58-9C-D Pedestal: 58" Black, Steel, Dual Mount, Gooseneck
- PED - 58-9C-DSP Pedestal: 58" Bolt Down Dual Height (one extension)
- PED - 58-9C-S Pedestal: 58" Gooseneck, Blk. Powder Coated
- PED - 64-9C-D Pedestal: 64" Dual Headed Gooseneck
- PED - 64-9C-IN (PED02) Pedestal: 64" In-Ground Mount Gooseneck
- PED - 64-9C-S Pedestal: 64" Gooseneck, Blk. Powder Coated
- PED - 72-3-12 Pedestal: Flanged, HD 3" Tube, Truck Height.
- PED - 72-9C-D Pedestal: 72" Black, Steel, Dual Mount, Gooseneck
- PED - 72-9C-DSP Pedestal: 72" Black, Steel, Dual Mount, Gooseneck
- PED - 72-9C-IN (Ped03) Pedestal: 72" In-Ground Mount Gooseneck
- PED - 72-9C-S Pedestal: 72" Black Powder Coated Gooseneck
- PED - 72-DSP-3-12-12 Pedestal: 72" and 42", Dual Height, Black, Steel
- PED - 810HOU-PRO-001-CRS-B Portrait Steel Housing, 8" x 10"
- PED - 84-DSP-4-12-12 Pedestal: Gooseneck, Dual Headed
- PED - 912PLA-VERK-01-304 9X12 Stainless Retro Plate - Verkada TD52 Video Intercom
- PED - ADA-CS-TWR-47x4x6 Pedestal: 47" Tapered Steel w' 6" Face
- PED - ADA-CS-TWR-47x4x6BRZ Pedestal: 47" Tapered Bronze Fin w/6" Face
- PED - ADA-SS-Tower-47x4x4 Pedestal: 47" ADA Compliant, Stainless Steel, Heavy Duty, Pad Mount, Tower Style, 4x4
- PED - ADA-SS-TWR-47x4x6-2-BLK Pedestal: 47" Tapered Steel Pedestal W/6" Face
- PED - CS-ABP-0106 Plate: Buffer Plate, Black, (HDPE), 1" x 6"
- PED - CS-ABP-0505 Plate: Buffer Plate, Black, (HDPE), 5.0" x 5.0" x 1.0"
- PED - CS-ABP-1212 12" x 12" Buffer Plate for Long Range Card Readers
- PED - HD-100 Pedestal: 44" Black, Steel, Heavy Duty, Pad Mount, Architectural Style
- PED - HD-100-IN Pedestal: 72" Black, Heavy-Duty, In-Ground, Architectural Style
- PED - HD-BLACK-TOWER Pedestal: 48" Black, Steel, Tower Style
- PED - HD-DC Pedestal: 48" Heavy Duty Pedestal for Telephone Entry Systems
- PED - HD-DK Pedestal: 44" Black, Steel, Heavy Duty, Pad Mount, Architectural Style
- PED - HD-DK-ALUM-BLK Pedestal: Heavy Duty Aluminum Pedestal w/Large Faceplate
- PED - HOOD-CS-10x10 Hood: 10" x 10" Steel Hood, Weather Shroud
- PED - HOOD-CS-4.5x6 Hood: Portrait, 4.5"w x 6.0"h x 3.0"d, Black Wrinkle Powdercoat
- PED - HOOD-CS-4.5x8 Hood: Portrait, 4.5"w x 8.0"h x 3.5"d, Black Wrinkle Powdercoat
- PED - HOOD-CS-8x8 Hood: 8" x 8" Steel Hood, Weather Shroud
- PED - LANDO-CS-12X8-E Housing: Landscape, 12x8x6, Black Wrinkle Powdercoat
- PED - LANDO-CS-14X10-E Housing: Landscape, 14x10x6, Black Wrinkle Powdercoat
- PED - LANDO-CS-14x8-E Housing: Landscape, 14x8x3.5, Black Wrinkle Powdercoat
- PED - LANDO-CS-16X8-E Housing: Landscape, 16x8x6, Black Wrinkle Powdercoat
- PED - LANDO-CS-20X14-E Housing: Landscape, 20x14x3.5, Black Wrinkle Powdercoat
- PED - LANDO-SS-10X8-E Housing: Landscape, 10x8, SS
- PED - MC-CS-06-E 6X6 Housing: Blk Powder Coated, NEMA 4.x
- PED - MC-CS-08-E Housing: Square, 8x8x3, Black Wrinkle Powdercoat
- PED - MC-CS-10-E Housing: 10" x 10" Square Steel Housing
- PED - MC-CS-14-E Housing, 14" x 14"
- PED - MC-CS-16-E Housing, 16" x 16", Square Steel
- PED - MC-CS-24-E Housing: Square, 24x24x6, Black Wrinkle Powdercoat
- PED - MC-PC-10-E-BLK Nofer Box Housing: 10x10 Polycarbonate, SS hinge
- PED - MC-PC-14-E-BLK Housing: 14" Square Polycarbonate Housing
- PED - Portra-CS-8x10-E Portrait Steel Housing, 8x10, Blk Powder Coated
- PED - Portra-CS-8x14-E 8" x 14" Portrait Steel Housing
- PED - STUD-ANCHOR-625 Stud-bolt Pedestal Mounting Kit - 5/8" Bolts
Precision Gate Rollers Inc.
- FAB - 3500-0 (Roller Only) Guide Roller: 2" Round, Standard Duty, Roller Only
- FAB - Bracket, 4 in Sq post Bracket: Mounting Bracket (no wheel)
- FAB - Cant Bracket - No Roller 4" Pipe Bracket with U-Bolts
- FAB - FS-5000-4 Cant Wheel: Nylon, 2" OD pipe gate frames & 4" Rnd Posts. 2200 lb.
- FAB - FS2000BR Rear Pipe Roller, Plastic Wheel, w/Bracket. (350 lbs Rating)
- FAB - FS3500 Cantilever wheel 2" Square (light duty 2200 lbs rating)
- FAB - FS3500-4SQ Wheel: Cantilever, 2 inch Sq. for 4 inch Sq. Post
- FAB - FS8000HD Cantilever Wheel: Round Heavy Duty 4 Inch Post Mount
ROFU Security International Corp.
- ROF - 1500-05G Electric Strike Solenoid, Fail Secure, 12 Volt AC/DC
- ROF - 1505-05 US26 (discontinued) Elec Strike: Fail Sec, 12VDC/12VAC, Silver
- ROF - 1505-05 US4 Elec Strike: Fail Sec, 12VDC/12VAC, Satin Brass, Clear Ctd.
- ROF - 1505-05G Electric Strike, Fail Secure, 12V AC/DC, Gold
- ROF - 1702-08 Electric Strike: 24 VDC, Silver Faceplate
- ROF - 1703-08 Electric Strike: 24 VDC, Silver Faceplate
- ROF - ROFU 2400 Kit Electric Strike: 2400 kit, 12/24VDC
SDS Security Door Controls
- SDC - 1575U Maglock: 1200 lbs, Side Mnt, w/Sensor
- SDC - 5524 Maglock: Strike Plate
Seco-Larm USA INC
- SE3 - DH-100A-O1SQ Door Holder Armature Plate for DH-151SQ and DH-171SQ
- SE3 - DH-100E-40SQ Extension Bar for DH-151, DH-171, 4" Door Holder
- SE3 - DH-171SQ Magnetic Door Holder, FM, 12VAC/VDC, 24VAC/VDC, 120VAC
- SE3 - E-941DA-1K2P Maglock: Double Door 1200lb. 12/24VDC (Sold in Pairs Only)
- SE3 - E-941DA-600Q Maglock: Double Door, 600 lbs. of Holding Force Each
- SE3 - E-941S-1K2/UQ Bracket: U Bracket For Glass Doors
- SE3 - E-941S-1K2/ZQ Bracket: L & Z Brackets for use with Seco-Larm Maglocks
- SE3 - E-941S-600/ZQ Bracket: Z Bracket for 600 lbs. Maglocks
- SE3 - E-941SA-1200 Maglock: 1200 lbs, Lock only, Indoor use
- SE3 - E-941SA-1K2PD Maglock: 1200 lbs, w/ Bond Sensor, Status LED, & Timer
- SE3 - E-941SA-300 Maglock: 300 lbs. Indoor/Outdoor
- SE3 - E-941SA-600 Maglock: 600 lb
- SE3 - E-942FC-1300 Maglock: Outdoor Rated Gate Maglock
- SE3 - E-942FC-1K3SQ Maglock: 1,300-lb, Face Mount, 12VDC or 24VDC
- SE3 - E-942FC-600SQ Maglock: 600 lbs. Outdoor, Face Mount
- SE3 - SD-927PKC-NEQ No Touch Request-To-Exit Single Gang
- SE3 - SD-961A-36 Exit Bar: Push-To-Exit Bar
- SE3 - SD-962AR-36G Exit Bar: 30"-48" doors, rim type, dead latch, Ansi A 156.3
- SE3 - SD-962H-8LAQ Lockset: Mechanical Keypad Door Lock
- SE3 - SD-969-M18/S Gate Lock Armored Door Cord -See "Details" for compatibility
- SE3 - SD-969-S18Q Cable: Armored Door Cable, Alum. End Caps, 18"
- SE3 - SD-991A-D1Q Electric Strike: Fail Secure, Mini No Cut, SS, 12VDC
- SE3 - SD-994A-A1AQ Electric Door Strike, Reversible, Asymmetric
- SE3 - SD-994A-A1SQ Electric Door Strike, Reversible, Symmetric
- SE3 - SD-994C Electric Strike: Fail Safe or Fail Secure, 12VDC, For Wood Doors
- SE3 - SD-995C Electric Strike: Fail Safe or Fail Secure, 12VDC, 250MA
- SE3 - SD-997A-GBQ Electric Deadbolt, Fail Secure 12/24 VDC
- SE3 - SD-997B-GBQ Electric Deadbolt
- SE3 - SD-998C-D3Q Electric Rim Strike, Surface Mount 12/24VDC
Securitron Magnalock Corp./ Assa Abloy
- HES - 1006CDB Electric Strike: Complete Pac for Deadbolt Locks
- HES - 1006CS Electric Strike: Complete Smart-Strike
- HES - 2005M3 SMART Pac III In-Line Power Control
- HES - 5000C Electric Strike: For 1/2 or 5/8 Latchbolt
- HES - 5200C-630 Electric Strike: Complete PAC
- HES - 7000C-630 Electric Strike: 7000, 24 VDC Kit, Satin SS
- HES - 8500-630 Electric Strike: 630 Satin SS finish
- HES - 9400 Rim Strike: Slim Line, Outdoor rated, 1/2" latch
- HES - 9500 Rim Strike: Fire rated, 3/4" latch
- HES - 9600 Rim Strike: Wind Storm Rated, 3/4" latch
- HES - 9800 Rim Strike: Low Profile (for Adams Rite Exit Bars)
- SE2 - 8801EL30-24 Narrow Stile Starwheel Rim Exit Device
- SE2 - APS-SAM2 Strike Plate Replacement, Model SAM2
- SE2 - DL-30 DL-2 30 Inch Armored Door Loop
- SE2 - FMK-SL Bracket: Flex-Mount Bracket Kit, Sliding Gate
- SE2 - FMK-SW Bracket: Kit, Flex-Mount Gate Lock, Swing
- SE2 - GL1-FL Lock: Gate Lock, Electro-Mechanical (Fail Locked)
- SE2 - GL1-FLM Gate Lock: Electro-Mechanical (Monitored)
- SE2 - GL1-FS Gate Lock: Electro-Mechanical (Fail Safe)
- SE2 - GL1-Strike/Catch GL1 Strike/Catch (390-169-00)
- SE2 - GMC Lock Gate Mortise Cylinder for GL1 FL
- SE2 - M32 Maglock: 600 lbs 12/24 VDC
- SE2 - M32F Maglock: 600 Lb
- SE2 - M62 Maglock: 1200 lbs, Side Drilled
- SE2 - M62D Magnalock 62-12/24VDC DPS (Door Position Switch)
- SE2 - M62F Maglock: M62, Face Drilled
- SE2 - M62FD Maglock: M62, Face Drilled, w/ Door Position
- SE2 - M62FG Maglock: Face Mount, 1200 lbs, Gate Conduit
- SE2 - M62FG-SASM Maglock: M62, 12/24 VDC Face Drilled , Gate Conduit w/ SASM Bracket
- SE2 - M62FGB Maglock: 1200 Lbs, FGB
- SE2 - M68 Magnalock: Model M68 - 1200 lbs
- SE2 - M82B Maglock: 1800 lb, B
- SE2 - M82FGB Maglock: 1800 lb, FGB
- SE2 - MK Keyswitch: Mortise Keyswitch, Momentary SPDT
- SE2 - MUNL-24 Electronic Strike: Mortise, Unlatch, Motorized 24 VDC
- SE2 - SAM Shear Aligning Magnalock
- SE2 - SASM Shock Absorbing Strike Mount Kit
- SE2 - TSB-BK Exit Bar: Touch Sense Bar, Black 36"
- SE2 - TSB-C Cable: Armored Cable
- SE2 - UNL-12 Electric Strike: UnLatch for Cylindrical Locks, 12VDC
- SE2 - UNL-24 Electric Strike: UnLatch for Cylindrical Locks, 24VDC, SS
- SE2 - WEMB-BK-36 Exit Bar: Electromechanical, Black, 36 Inch
- SE2 - WEMB-BK-42 Exit Bar: Electromechanical, Black, 42 Inch
- SE2 - WEMB-BK-48 Exit Bar: Electromechanical, 48" Black Anodized, Weatherproof
- SE2 - WEMB-CL-36 Exit Bar: Electromechanical, Clear Finish, 36 Inch
- SE2 - ZA-32/62BK Bracket: Adjustable Z-Bracket 32/62 Black Anodized
- SE2 - ZA-62SS Maglock: Z bracket for M62, SS
Torxun Inc
- TOR - 1100.001B SENSORVAULT, Optex Bollard/Mnt Post, Blk
- TOR - 1100.002B SENSORVAULT, Photo Eye Bollard/Mnt Post, Blk
- TOR - 1100.003B LZRVAULT BEA LZRH100 Bollard/Mnt Post, Black
- TOR - 9906.011R Heavy Duty Barrel Hinge
- TOR - 9912.001P LOCKGUARD, Ped Gate, Powder Coated Blk
- TOR - 9912.001R LOCKGUARD, Ped Gate, Raw Unpainted Steel
Transmitter Solutions
- TRA - MAGLOC1200FSIOTB Maglock: 1200 lb, Face or Side Mount 12-24 VDC
TRINE ACCESS TECHNOLOGY
- TRI - TRINE 001C Electric Strike: 8-16VAC/4-6VDC
- TRI - TRINE 005 C Electric Strike: 8-16VAC/4-6VDC
- TRI - TRINE 4850-32D Electric Strike: 1/2" Surface Mount 12-24V Rim Strike
- TRI - TRINE EN400-12DC-10B-LH Electric Strike: 12 VDC, Dark Bronze
- TRI - TRINE EN400-GATEBOX Gatebox: For EN400RP Strike, Weldable
- TRI - TRINE EN400RP-12DC-32D-RH Electric Strike: Rim Panic, 12 VDC, Satin SS
USAutomatic
- USA - 600170 Push Button Latch, Patriot
Viking Access Systems
- VIK - FA-XP30AC Conduit Adaptor for XP30-10K Photo Cell
- VIK - G5MHB Mounting hardware, back
- VIK - VAG5BPBM Back Plate: For G-5
- VIK - VNXG5HK Hardware Kit for G5NX
- VIK - VNXG5MHB Hardware: Mounting Hdw, Back Bushing for G5 Operator
Weldon Industries
- WEL - WI-CR3 Wheel Cover: Cantilever for 2 3/8" Wheel
- WEL - WI-CR3-N Cantilever Wheel: 2-3/8", frame, 4" Rnd Post (No Cover)
- WEL - WI-CR3-N-6S Cantilever Wheel: 2" Sq frame, 4" Rnd Post, Cast Brkt (No Cover)
- WEL - WI-CR3-N-TBC Cantilever Wheel: 2-3/8" frame, 4" Rnd Post, w/Cover
- WEL - WI-CR4-N Cantilever Wheel: 2-3/8" frame, 6-5/8" Rnd Post
- WEL - WI-CR6-N-4 Cantilever Wheel: 2" Sq frame, 4" Sq post (No Cover)
- WEL - WI-CR7-N Cantilever Wheel: 2-3/8" frame, 4" Rnd post
- WEL - WI-CR7-N-TBC Cantilever Wheel: 2-3/8" frame, 4" Rnd post, Welded Brkt
- WEL - WI-CR8-N Cantilever Wheel: 2-3/8" frame, 2-7/8 Rnd post (No Cover)
- WEL - WI-NW-HA Rear Pipe Roller, Nylon Wheel, w/bracket
- WEL - WI-TBCOVER-BWN Cantilever Wheel: Cover, Universal Top or Bottom

Refund Policy | Locations

WA Spokane 866-709-8869 Seattle 800-548-2365

OR Portland 503-331-2321

CA Pleasanton 925-750-7483 Sacramento 916-473-0623

Corona 951-898-4551San Diego 858-384-7287

Loading...

Products

Filter by Manufacturer

Filter by Category

Search Products

Hardware